وصف المنتج
Product Parameters
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
Detailed Photos
| NMRV-063-30-VS–AS-80B5-0.75KW-B3 | |||
| NMRV | Means hole-input with flange | ||
| القيمة المرجعية للصرف | Means shaft-input without flange | ||
| 063 | Centre-to-centre spacing of worm-gear speed reducer | ||
| 30 | ratio | ||
| VS | Double input shaft | F1(FA) | Flange putput shaft |
| AS | Single output shaft | AB | Double output shaft |
| PAM |
| 80B5 | Motor mounting facility |
| 0.75KW |
| B3 | Mounting position |
| N2 | NRV571 | NRV030 | NRV040 | NRV050 | NRV063 | NRV075 | NRV090 | NRV110 | NRV130 |
| 400 | 390 | 530 | 1571 | 1400 | 1830 | 2160 | 2390 | 3571 | 3950 |
| 250 | 460 | 620 | 1200 | 1650 | 2150 | 2520 | 2800 | 3530 | 4610 |
| 150 | 550 | 740 | 1420 | 1960 | 2450 | 2990 | 3310 | 4180 | 5470 |
| 100 | 630 | 850 | 1620 | 2250 | 2910 | 3430 | 3800 | 4790 | 6260 |
| 60 | 740 | 1000 | 1920 | 2660 | 3450 | 4060 | 4500 | 5680 | 7420 |
| 40 | 850 | 1150 | 2200 | 3050 | 3950 | 4650 | 5150 | 6500 | 8500 |
| 25 | 990 | 1350 | 2570 | 3570 | 4620 | 5440 | 6571 | 7600 | 9940 |
| 10 | 1350 | 1830 | 3490 | 4840 | 6270 | 7380 | 8180 | 10320 | 13500 |
|
|
|
|
|
|
|
|
|
|
|
| A | 50 | 65 | 84 | 101 | 120 | 131 | 162 | 191 | 203 |
| B | 38 | 50 | 64 | 76 | 95 | 101 | 122 | 151 | 163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
| صلابة: | سطح السن المقوى |
|---|---|
| تثبيت: | 90 Degree |
| تَخطِيط: | Expansion |
| Gear Shape: | Bevel Gear |
| خطوة: | خطوة واحدة |
| Type: | Gear Reducer |
| Samples: | US$ 30/Piece 1 Piece(Min.Order) | |
|---|
Calculating Torque Requirements for an NMRV Gearbox
Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.
- Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
- Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
- Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
- Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.
Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency
Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.
مبادئ تصميم علبة تروس NMRV
يعتمد تصميم علبة تروس NMRV (التروس الدودية) على مبادئ أساسية تُمكّنها من العمل بكفاءة وموثوقية:
- آلية التروس الدودية: يُعدّ البرغي الدودي وعجلة الدودة جوهر علبة تروس NMRV. يتعشّق البرغي الدودي، الذي يكون عادةً أسطواني الشكل، مع أسنان عجلة الدودة. يوفر هذا التصميم نسب تخفيض عالية للتروس.
- التروس الحلزونية: عادةً ما يكون لولب الدودة حلزونيًا، مما يسمح بتعشيق أكثر سلاسة مع عجلة الدودة. ويقلل نظام التروس الحلزوني من الاحتكاك الانزلاقي والضوضاء المصاحبة لتروس الدودة التقليدية ذات القطع المستقيم.
- تصميم صغير الحجم: صُممت علب تروس NMRV لتكون صغيرة الحجم، وغالبًا ما تكون ذات تصميم بزاوية قائمة. وهذا يسمح بالاستخدام الأمثل للمساحة في مختلف التطبيقات.
- هيكل من سبيكة معدنية: تُصنع العديد من علب تروس NMRV من سبائك عالية الجودة، مما يوفر لها المتانة ومقاومة التآكل. ويضمن اختيار المواد علبة تروس قادرة على تحمل الأحمال المتغيرة والظروف البيئية المختلفة.
- دعامة المحمل: تدعم المحامل العناصر الدوارة داخل علبة التروس، مما يقلل الاحتكاك ويضمن التشغيل السلس. وقد وُضعت المحامل في مواقع استراتيجية لتحمل الأحمال الشعاعية والمحورية.
- منع التسرب والتشحيم: تُجهّز علب تروس NMRV بآليات إحكام فعّالة لمنع دخول الملوثات والحفاظ على زيت التشحيم. يُعدّ التشحيم السليم ضروريًا لتقليل التآكل وتعزيز كفاءة علبة التروس.
- نقل الطاقة بكفاءة: توفر آلية التروس الدودية في علب تروس NMRV نسب تخفيض عالية للتروس، مما يسمح بنقل الطاقة بكفاءة مع تقليل فقد الطاقة.
- تشغيل هادئ: يساهم التصميم الحلزوني للبرغي الدودي وعجلة الدودة في تشغيل أكثر هدوءًا مقارنة بتروس الدودة التقليدية ذات القطع المستقيم.
- نطاق واسع من النسب: تتوفر علب تروس NMRV بنسب تروس مختلفة، مما يسمح للمستخدمين باختيار التكوين المناسب لاحتياجات تطبيقاتهم الخاصة.
ينتج عن الجمع بين مبادئ التصميم هذه علبة تروس NMRV توفر نقل طاقة فعال وموثوق وهادئ لمجموعة واسعة من التطبيقات الصناعية.
Key Features of an NMRV Gearbox
NMRV gearboxes, also known as worm gear reducers, offer several key features that make them suitable for various applications:
- تصميم صغير الحجم: NMRV gearboxes are known for their compact and space-saving design, making them ideal for installations with limited space.
- High Efficiency: These gearboxes offer relatively high efficiency levels, which ensures efficient power transmission and reduced energy loss.
- Speed Reduction: NMRV gearboxes are primarily used for speed reduction applications, where the input speed is reduced while torque is increased.
- Torque Multiplication: The worm and worm wheel mechanism allows for torque multiplication, making NMRV gearboxes suitable for applications requiring high torque output.
- Self-Locking: The helical design of the worm causes self-locking, preventing the output shaft from back-driving the input shaft and providing mechanical locking.
- Smooth Operation: NMRV gearboxes offer smooth and quiet operation, making them suitable for applications where noise reduction is important.
- نطاق واسع من النسب: These gearboxes come in a wide range of gear ratios, allowing users to select the appropriate ratio for their specific application.
- Low Maintenance: The simple design and few moving parts contribute to the low maintenance requirements of NMRV gearboxes.
- Versatility: NMRV gearboxes are versatile and can be used in various industries and applications, including conveyor systems, food processing, packaging, and more.
It’s important to consider these key features when selecting an NMRV gearbox for your specific application to ensure optimal performance and efficiency.
editor by CX 2023-12-15