وصف المنتج
RV series Worm Geared Motor صفات
- المركبات الترفيهية – الأحجام: – 150
- خيارات الإدخال: مع عمود إدخال، مع شفة مربعة، مع شفة إدخال
- طاقة الإدخال من 0.06 إلى 11 كيلوواط
- تتراوح أحجام المركبات الترفيهية من 030 إلى 105 في هيكل من سبائك الألومنيوم المصبوب وأكثر من 110 في هيكل من الحديد الزهر
- النسب بين 5 و 100
- أقصى عزم دوران 1550 نيوتن متر، وأقصى أحمال شعاعية مسموح بها 8771 نيوتن
- تُزود الوحدات المصنوعة من الألومنيوم بزيت اصطناعي كامل، وتتيح أوضاع تركيب عالمية، دون الحاجة إلى تعديل كمية مواد التشحيم.
- عجلة دودة: نحاس (KK Cu).
- سعة التحميل وفقًا للمعايير التالية: ISO 9001:2015/GB/T 19001-2016
- المقاس 030 وما فوق مطلي باللون الأزرق RAL 5571
- تتوفر مخفضات التروس الدودية بمجموعات مختلفة: NMRV+NMRV، NMRVpower+NMRV، JWB+NMRV
- NMRV، NRV+VS، NMRV+AS، NMRV+VS، NMRV+F
- Options: torque arm, output flange, viton oil seals, low/high temperature oil filling/drain/breather/level plug.
ستار شاين درايف
تأسست شركة ZheJiang CHINAMFG Drive Co.,Ltd، التي كانت سلفها مؤسسة قوالب عسكرية مملوكة للدولة، في عام 1965. وتتخصص CHINAMFG في حلول نقل الطاقة الكاملة لصناعات تصنيع المعدات المتطورة بناءً على هدف "المنتج الأساسي، وتصميم التطبيقات، والخدمة الاحترافية".
تتمتع شركة CHINAMFG بقوة تقنية عالية تضم أكثر من 350 موظفًا حاليًا، من بينهم أكثر من 30 فنيًا هندسيًا و30 مفتش جودة، وتغطي مساحة 80000 متر مربع، بالإضافة إلى أنواع مختلفة من آلات المعالجة ومعدات الاختبار المتطورة. لدينا أساس متين لتطوير تطبيقات الصناعة وتقديم خدمات مخفضات السرعة ومغيرات السرعة عالية الجودة، وذلك بفضل مركز أبحاث التكنولوجيا الهندسية الإقليمي، ومختبر مخفضات سرعة التروس، وقاعدة البحث والتطوير الحديثة.
فريقنا
ضبط الجودة
الجودة: الإصرار على التحسين، والسعي نحو التميز. مع تطور صناعة تصنيع المعدات، لا يرضى العملاء أبدًا بالجودة الحالية لمنتجاتنا، بل على العكس من ذلك، نخلق قيمة الجودة.
سياسة الجودة: تحسين المستوى العام في مجال نقل الطاقة
رؤية الجودة: التحسين المستمر، والسعي نحو التميز
فلسفة الجودة: الجودة تخلق القيمة
3. مراقبة جودة المواد الواردة
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective
measures to prevent recurrence.
4. مراقبة جودة العملية
موقع التصنيع للفحص الأولي والتفتيش والتفتيش النهائي، وأخذ العينات وفقًا لمتطلبات بعض المشاريع، والحكم على اتجاه تغير الجودة؛
تم اكتشاف ظاهرة غير طبيعية في عملية التصنيع، والإشراف على قسم الإنتاج لتحسين الوضع والقضاء على الظاهرة أو الحالة غير الطبيعية.
5. مراقبة الجودة النهائية (FQC)
بعد أن يُكمل قسم التصنيع تصنيع المنتج، يتم التحقق من جودة المنتج النهائي من خلال القيام بدور العميل، وذلك لضمان جودته.
توقعات العملاء واحتياجاتهم.
6. مراقبة الجودة الخارجية (OQC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the
product is a product inspection to determine the qualified products.
7. Certification.
التعبئة والتغليف
توصيل
/* 22 يناير 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| طلب: | Machinery, Agricultural Machinery |
|---|---|
| وظيفة: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| تَخطِيط: | Worm Gear |
| صلابة: | سطح السن المقوى |
| تثبيت: | Flange, Shaft, Torque Arm |
| خطوة: | خطوة واحدة |
| التخصيص: | متاح | طلب مخصص |
|---|
Replacing Parts vs. Replacing the Whole NMRV Gearbox
Whether to replace parts or the entire NMRV gearbox depends on the extent of the issue and the availability of replacement parts:
Replacing Parts: If a specific component is faulty or worn, you can often replace that part. This is a cost-effective solution and is feasible when the damage is isolated to a single component.
When to Replace Parts:
- Minor wear on gears, bearings, or seals.
- Specific components are damaged, but the rest of the gearbox is in good condition.
Replacing the Whole Gearbox: If multiple components are severely damaged, the gearbox housing is cracked, or the gearbox repeatedly experiences issues, replacing the entire unit might be a better option.
When to Replace the Whole Gearbox:
- Severe damage to multiple components.
- Cracks or damage to the gearbox housing.
- Frequent breakdowns and repairs.
Professional Assessment: In some cases, it’s best to consult a professional technician to assess the situation and provide recommendations. They can guide you on whether to replace parts or the entire unit based on the specific circumstances.
Ultimately, the decision between replacing parts and replacing the whole NMRV gearbox depends on factors such as the extent of damage, cost considerations, and the expertise of professionals.
Lifespan of an NMRV Gearbox
The lifespan of an NMRV (worm gear) gearbox can vary based on several factors, including the quality of manufacturing, proper maintenance practices, operating conditions, and the specific application it is used for. However, when designed, manufactured, and maintained properly, NMRV gearboxes can have a long and reliable service life.
High-quality NMRV gearboxes that are made from durable materials, precisely machined, and assembled with care tend to have a longer lifespan. Regular maintenance, including proper lubrication, inspection, and addressing any signs of wear or damage, can significantly extend the gearbox’s operational life.
The operating conditions in which the gearbox is used also play a role in determining its lifespan. Factors such as load, temperature, speed, and environment can impact the wear and tear on the gearbox components.
It’s important to follow the manufacturer’s recommendations for maintenance intervals and procedures to ensure optimal performance and longevity of the NMRV gearbox. By adhering to these guidelines and addressing any issues promptly, users can expect an NMRV gearbox to provide reliable service for many years.
Key Features of an NMRV Gearbox
NMRV gearboxes, also known as worm gear reducers, offer several key features that make them suitable for various applications:
- تصميم صغير الحجم: NMRV gearboxes are known for their compact and space-saving design, making them ideal for installations with limited space.
- High Efficiency: These gearboxes offer relatively high efficiency levels, which ensures efficient power transmission and reduced energy loss.
- Speed Reduction: NMRV gearboxes are primarily used for speed reduction applications, where the input speed is reduced while torque is increased.
- Torque Multiplication: The worm and worm wheel mechanism allows for torque multiplication, making NMRV gearboxes suitable for applications requiring high torque output.
- Self-Locking: The helical design of the worm causes self-locking, preventing the output shaft from back-driving the input shaft and providing mechanical locking.
- Smooth Operation: NMRV gearboxes offer smooth and quiet operation, making them suitable for applications where noise reduction is important.
- نطاق واسع من النسب: These gearboxes come in a wide range of gear ratios, allowing users to select the appropriate ratio for their specific application.
- Low Maintenance: The simple design and few moving parts contribute to the low maintenance requirements of NMRV gearboxes.
- Versatility: NMRV gearboxes are versatile and can be used in various industries and applications, including conveyor systems, food processing, packaging, and more.
It’s important to consider these key features when selecting an NMRV gearbox for your specific application to ensure optimal performance and efficiency.
editor by CX 2024-04-11