Produktbeschreibung
Product Parameters
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
Detailed Photos
| NMRV-063-30-VS–AS-80B5-0.75KW-B3 | |||
| NMRV | Means hole-input with flange | ||
| NRV | Means shaft-input without flange | ||
| 063 | Centre-to-centre spacing of worm-gear speed reducer | ||
| 30 | ratio | ||
| VS | Double input shaft | F1(FA) | Flange putput shaft |
| AS | Single output shaft | AB | Double output shaft |
| PAM |
| 80B5 | Motor mounting facility |
| 0.75KW |
| B3 | Mounting position |
| N2 | NRV571 | NRV030 | NRV040 | NRV050 | NRV063 | NRV075 | NRV090 | NRV110 | NRV130 |
| 400 | 390 | 530 | 1571 | 1400 | 1830 | 2160 | 2390 | 3571 | 3950 |
| 250 | 460 | 620 | 1200 | 1650 | 2150 | 2520 | 2800 | 3530 | 4610 |
| 150 | 550 | 740 | 1420 | 1960 | 2450 | 2990 | 3310 | 4180 | 5470 |
| 100 | 630 | 850 | 1620 | 2250 | 2910 | 3430 | 3800 | 4790 | 6260 |
| 60 | 740 | 1000 | 1920 | 2660 | 3450 | 4060 | 4500 | 5680 | 7420 |
| 40 | 850 | 1150 | 2200 | 3050 | 3950 | 4650 | 5150 | 6500 | 8500 |
| 25 | 990 | 1350 | 2570 | 3570 | 4620 | 5440 | 6571 | 7600 | 9940 |
| 10 | 1350 | 1830 | 3490 | 4840 | 6270 | 7380 | 8180 | 10320 | 13500 |
|
|
|
|
|
|
|
|
|
|
|
| A | 50 | 65 | 84 | 101 | 120 | 131 | 162 | 191 | 203 |
| B | 38 | 50 | 64 | 76 | 95 | 101 | 122 | 151 | 163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
| Härte: | Gehärtete Zahnoberfläche |
|---|---|
| Installation: | 90 Degree |
| Layout: | Expansion |
| Zahnradform: | Kegelradgetriebe |
| Schritt: | Einzelschritt |
| Type: | Gear Reducer |
| Proben: | US$ 30/Piece 1 Stück (Mindestbestellmenge) | |
|---|
Einsatz von NMRV-Getrieben in Anwendungen mit hoher Belastung
NMRV-Getriebe eignen sich für Anwendungen mit mittleren bis hohen Lasten, ihre Belastbarkeit ist jedoch im Vergleich zu anderen Getriebetypen begrenzt. Sie sind optimal für Anwendungen mit leichten bis mittleren Lasten geeignet, wie z. B. Förderanlagen, Verpackungsmaschinen und kleinere Maschinen. Es ist wichtig, die spezifischen Lastanforderungen zu berücksichtigen und sich mit Getriebeherstellern oder Ingenieuren abzustimmen, um sicherzustellen, dass das gewählte NMRV-Getriebe die Lastanforderungen der vorgesehenen Anwendung erfüllen kann.
Lubrication for an NMRV Gearbox
Lubrication is essential for the proper functioning and longevity of an NMRV gearbox. The type and amount of lubricant required may vary depending on the gearbox model and manufacturer. Here are the general lubrication practices:
- Recommended Lubricants: Use the lubricants specified by the gearbox manufacturer. Typically, high-quality gear oils with the appropriate viscosity and additives are recommended.
- Initial Fill: Prior to the gearbox’s first operation, ensure that it is properly filled with the recommended lubricant to the correct level. Follow the manufacturer’s guidelines for the proper quantity.
- Lubricant Change: Regularly change the lubricant according to the manufacturer’s recommended intervals. Over time, lubricants can degrade due to heat and contamination, which can affect gearbox performance.
- Temperature Considerations: Gearboxes operating in extreme temperatures may require lubricants with specific temperature ranges to ensure proper viscosity and protection.
- Checking Levels: Periodically check the lubricant level in the gearbox to ensure it is within the specified range. This can prevent damage caused by insufficient lubrication.
- Oil Analysis: Some gearbox systems benefit from regular oil analysis to monitor lubricant condition and identify potential issues before they cause significant damage.
Proper lubrication practices contribute to reduced friction, wear, and heat generation within the NMRV gearbox, leading to improved efficiency and extended lifespan.
Einbau eines NMRV-Getriebes
Der Einbau eines NMRV-Getriebes erfordert sorgfältige Beachtung, um die korrekte Ausrichtung und sichere Befestigung zu gewährleisten. Hier finden Sie eine allgemeine Anleitung zum Einbauprozess:
- Bereiten Sie den Arbeitsbereich vor: Sorgen Sie für einen sauberen und ordentlichen Arbeitsplatz mit den notwendigen Werkzeugen und Geräten.
- Positionierung: Platzieren Sie das NMRV-Getriebe an der gewünschten Stelle an Ihrer Maschine und achten Sie darauf, dass es mit den Eingangs- und Ausgangskomponenten übereinstimmt.
- Ausrichtung: Stellen Sie sicher, dass die Eingangswelle des Getriebes mit der Antriebswelle der Kraftquelle fluchtet. Eine Fehlausrichtung kann zu vorzeitigem Verschleiß und verminderter Effizienz führen.
- Montage: Befestigen Sie das NMRV-Getriebe mit geeigneten Befestigungsmitteln sicher am Maschinenrahmen. Beachten Sie die Anzugsmomente gemäß den Herstellerangaben.
- Eingangskopplung: Verbinden Sie die Eingangswelle des Getriebes mit der Antriebswelle mittels einer geeigneten Kupplung. Diese Kupplung muss korrekt ausgerichtet sein, um unnötige Belastungen der Getriebekomponenten zu vermeiden.
- Ausgangskopplung: Verbinden Sie analog dazu die Abtriebswelle des Getriebes mit dem angetriebenen Bauteil mittels einer geeigneten Kupplung.
- Schmierung: Vor der Inbetriebnahme muss das Getriebe mit dem empfohlenen Schmierstoff befüllt werden, um ein einwandfreies Ineinandergreifen der Zahnräder zu gewährleisten und die Reibung zu verringern.
- Testen: Lassen Sie die Maschine kurz laufen, um auf ungewöhnliche Geräusche, Vibrationen oder Leckagen zu prüfen. Nehmen Sie gegebenenfalls notwendige Anpassungen vor.
Für einen reibungslosen und problemlosen Einbau ist es unerlässlich, die Installationsrichtlinien und -spezifikationen des Herstellers genau zu befolgen. Eine fachgerechte Installation trägt wesentlich zur Langlebigkeit und zuverlässigen Funktion Ihres NMRV-Getriebes bei.
editor by CX 2023-11-17