Produktbeschreibung
Produktbeschreibung
- NMRV – Sizes:–150
- Eingangsoptionen: mit Eingangswelle, mit Vierkantflansch, mit Eingangsflansch
- Input Power 0.06 to 11 kW
- NMRV-Size from 030 to 105 in die-cast aluminium alloy budy and over 110 in cast iron
- Verhältnisse zwischen 5 und 100
- Max torque 1550 N.m and admissible output radial loads max 8771 N
- Die Aluminiumeinheiten werden komplett mit synthetischem Öl geliefert und ermöglichen universelle Montagepositionen, ohne dass die Schmierstoffmenge angepasst werden muss.
- Worm wheel: Copper (KK Cu).
- Belastbarkeit gemäß: ISO 9001:2015/GB/T 19001-2016
- Größen ab 030 sind in RAL 5571 Blau lackiert.
- Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
- NMRV, NRV+VS, NMRV+AS, NMRV+VS, NMRV+F
- Optionen: Drehmomentarm, Abtriebsflansch, Viton-Öldichtungen, Öl für niedrige/hohe Temperaturen, Einfüll-/Ablass-/Entlüftungs-/Niveaustopfen, kleiner Spalt
| Model | Ausgangsdrehmoment | Durchmesser der Abtriebswelle |
| NMVR030 | 21 Nm | φ14 |
| NMVR040 | 45 Nm | φ19 |
| NMVR050 | 84 Nm | φ25 |
| NMVR063 | 160 Nm | φ25 |
| NMVR075 | 230 Nm | φ28 |
| NMVR090 | 410 Nm | φ35 |
| NMRV105 | 630 Nm | φ42 |
| NMRV110 | 725 Nm | φ42 |
| NMRV130 | 1050 Nm | φ45 |
| NMRV150 | 1550 Nm | φ50 |
Qualitätskontrolle
Qualität: Ständige Verbesserung, Streben nach Exzellenz. Mit der Entwicklung der Geräteherstellungsindustrie geben sich die Kunden nie mit der aktuellen Qualität unserer Produkte zufrieden, im Gegenteil, sie schaffen den Wert der Qualität.
Quality policy: to enhance the overall level in the field of power transmission
Quality View: Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures to prevent recurrence.
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend; found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state. After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of customer expectations and needs.
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product is a product inspection to determine the qualified products.
Matching Power Form
Detailed Photos
Verpackung & Versand
Certifications
/* 22. Januar 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Anwendung: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Härte: | Gehärtete Zahnoberfläche |
| Installation: | 90 Degree |
| Layout: | Koaxial |
| Zahnradform: | Cylindrical Gear |
| Schritt: | Einzelschritt |
| Proben: | US$ 40/Piece 1 Stück (Mindestbestellmenge) | |
|---|
Calculating Torque Requirements for an NMRV Gearbox
Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.
- Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
- Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
- Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
- Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.
Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency
Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.
Lebensdauer eines NMRV-Getriebes
Die Lebensdauer eines Schneckengetriebes kann je nach verschiedenen Faktoren variieren, darunter die Fertigungsqualität, ordnungsgemäße Wartung, Betriebsbedingungen und der jeweilige Anwendungsbereich. Bei sachgemäßer Konstruktion, Fertigung und Wartung weisen Schneckengetriebe jedoch eine lange und zuverlässige Lebensdauer auf.
Hochwertige NMRV-Getriebe, die aus langlebigen Materialien gefertigt, präzise bearbeitet und sorgfältig montiert werden, weisen in der Regel eine längere Lebensdauer auf. Regelmäßige Wartung, einschließlich ordnungsgemäßer Schmierung, Inspektion und Behebung von Verschleiß- oder Beschädigungsanzeichen, kann die Betriebsdauer des Getriebes deutlich verlängern.
Die Betriebsbedingungen, unter denen das Getriebe eingesetzt wird, spielen ebenfalls eine Rolle für seine Lebensdauer. Faktoren wie Last, Temperatur, Drehzahl und Umgebungsbedingungen können den Verschleiß der Getriebekomponenten beeinflussen.
Um die optimale Leistung und Lebensdauer des NMRV-Getriebes zu gewährleisten, ist es wichtig, die Wartungsintervalle und -verfahren des Herstellers zu beachten. Durch die Einhaltung dieser Richtlinien und die umgehende Behebung von Problemen können Anwender erwarten, dass das NMRV-Getriebe viele Jahre zuverlässig funktioniert.
Choosing the Right Size NMRV Gearbox for Your Application
Selecting the appropriate size NMRV gearbox for your application involves considering several important factors:
- Input Power: Determine the power requirement of your application, including both the input speed and the required output torque.
- Service Factor: Take into account any potential overloads or unexpected conditions that may occur during operation. Applying a service factor ensures the gearbox can handle occasional peak loads.
- Output Speed: Calculate the desired output speed of the gearbox. This is crucial for ensuring the gearbox meets the requirements of your application.
- Operating Conditions: Consider the environmental conditions in which the gearbox will operate, including temperature, humidity, and exposure to dust or chemicals.
- Mounting and Space: Evaluate the available space for mounting the gearbox and ensure it fits within the allotted dimensions.
- Shaft Configuration: Determine whether the gearbox requires a specific shaft configuration or if additional components such as couplings are needed.
- Application Type: Consider the type of application the gearbox will be used in, such as conveyor systems, agitators, mixers, or other specific applications.
- Load Characteristics: Analyze the load characteristics, including the type of load (constant, intermittent, shock), to ensure the gearbox can handle the load variations.
It’s essential to work closely with gearbox manufacturers or distributors who can provide technical support and assist in selecting the right size NMRV gearbox based on your specific application requirements.
editor by CX 2024-04-09