China high quality Nmrv Series Hollow Shaft Worm Gear Reducer Horizontal Gearbox gearbox design

Description du produit

 

High Rpm RV series Aluminum Alloy Worm Gear box NMRV 571-150 Reducer Variable Wheel Drive Speed Reduction Worm Gearbox

Paramètres du produit

Specification

Type	Worm Gearbox/Worm Gear Speed Reducer
Model	NMRV:571,030,040,050,063,075,090,110,130,150
Center distance	25-150mm
Rapport	5,7.5,10,15,20,25,30,40,50,60,80,100
Torque	1.8-1800Nm
Motor	2 pole, 4 pole, 6 pole
Mounting position	Omnidirectional
Color	Blue/Silver grey Or On request
Material	NMRV571~090:Aluminum alloy; NMRV110~150 Cast iron

Details

Multiple inputs and outputs

Fonctionnalité
1. Mad of high-quality aluminum alloy,light weight and non-rusting
2. Large output torque
3. Smooth in running and low in noise,can work long time in dreadful conditions.
4. High in radiating efficiency.
5. Good-looking in appearance,durable in service life and small in volume.
6. Suitable for omnibearing installation.

contact-info.html
 

Model	NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150
Rapport	5,7.5,10,15,20,25,30,40,50,60,80,100
Couple de sortie	1.8-1760Nm
Application	Machinery Industry
Input Speed	900-2800RPM
Output Speed	10-250RPM
Material	Housing: Size 25-110 Is Aluminum Alloy, Size 110-150 Is Cast-Iron
	Worm Wheel: ZCuSn10Pb1
	Worm:20Cr
	Pinion:Tin Bronze
	Output Shaft: Steel-45#
IEC Flange	IEC Standard Flange Or On Customer Request

Detailed Photos

Dureté:	Hardened Tooth Surface
Installation:	90 Degree
Mise en page:	Expansion
Gear Shape:	Bevel Gear
Étape:	Étape unique
Type:	Gear Reducer

Exemples :	US$ 30/Piece 1 pièce (commande minimale) | Demande d'échantillon

Avantages de l'utilisation d'un engrenage à vis sans fin dans une boîte de vitesses NMRV

Les engrenages à vis sans fin offrent plusieurs avantages lorsqu'ils sont utilisés dans une boîte de vitesses NMRV :

1. Taux de réduction élevé : Les engrenages à vis sans fin offrent un rapport de réduction élevé dans un format compact, permettant une réduction de vitesse importante en une seule étape.

2. Haute efficacité : Bien que les engrenages à vis sans fin aient généralement un rendement mécanique inférieur à celui de certains autres types d'engrenages, la conception de la boîte de vitesses NMRV optimise le rendement grâce à l'utilisation d'une vis sans fin en bronze et d'un mécanisme autobloquant qui minimise le retour d'engrenage.

3. Conception compacte : Les engrenages à vis sans fin présentent une conception compacte et peu encombrante, ce qui les rend adaptés aux applications disposant d'un espace d'installation limité.

4. Fonctionnement fluide et silencieux : L'engrènement des engrenages à vis sans fin et la conception hélicoïdale de la vis sans fin permettent un fonctionnement relativement fluide et silencieux.

5. Autoverrouillage : Les engrenages à vis sans fin possèdent une propriété d'autoblocage intrinsèque, ce qui signifie qu'il est difficile pour la roue dentée d'être entraînée en sens inverse par la vis sans fin. Cette propriété est avantageuse pour les applications où le maintien d'une position sans mécanisme de verrouillage externe est essentiel.

6. Capacité de couple élevée : Les engrenages à vis sans fin peuvent transmettre des couples élevés, ce qui les rend adaptés aux applications nécessitant un couple de sortie élevé.

7. Lubrification simple : La conception du réducteur NMRV permet une lubrification efficace de la vis sans fin, garantissant des performances et une longévité optimales.

Ces avantages font des engrenages à vis sans fin un choix populaire pour les réducteurs NMRV dans diverses applications industrielles, où leurs caractéristiques contribuent à une transmission de puissance fiable et efficace.

Maintenance and Service of an NMRV Gearbox

Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:

• Lubrication: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
• Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
• Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
• Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
• Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
• Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
• Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
• Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
• Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.

By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.

Installing an NMRV Gearbox

Installing an NMRV gearbox requires careful attention to ensure proper alignment and secure attachment. Here’s a general guide to the installation process:

1. Prepare the Workspace: Ensure you have a clean and organized workspace with the necessary tools and equipment.
2. Positioning: Place the NMRV gearbox in the desired position on your machinery, making sure it aligns with the input and output components.
3. Alignment: Ensure that the input shaft of the gearbox is aligned with the driving shaft from the power source. Misalignment can lead to premature wear and reduced efficiency.
4. Mounting: Securely mount the NMRV gearbox to the machinery frame using appropriate fasteners. Follow the manufacturer’s recommendations for torque specifications.
5. Input Coupling: Connect the input shaft of the gearbox to the driving shaft using a suitable coupling. This coupling should be properly aligned to avoid unnecessary stress on the gearbox components.
6. Output Coupling: Similarly, connect the output shaft of the gearbox to the driven component using an appropriate coupling.
7. Lubrication: Before operation, make sure to fill the gearbox with the recommended lubricant to ensure proper gear meshing and reduce friction.
8. Testing: Run the machinery briefly to check for any unusual noises, vibrations, or leaks. Make any necessary adjustments.

It’s crucial to follow the manufacturer’s installation guidelines and specifications to ensure a smooth and trouble-free installation process. Proper installation contributes to the longevity and reliable performance of your NMRV gearbox.

editor by CX 2023-10-17