Description du produit
Paramètres du produit
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
Detailed Photos
| NMRV-063-30-VS–AS-80B5-0.75KW-B3 | |||
| RMNV | Means hole-input with flange | ||
| NRV | Means shaft-input without flange | ||
| 063 | Centre-to-centre spacing of worm-gear speed reducer | ||
| 30 | ratio | ||
| VS | Double input shaft | F1(FA) | Flange putput shaft |
| AS | Single output shaft | AB | Double output shaft |
| PAM |
| 80B5 | Motor mounting facility |
| 0.75KW |
| B3 | Mounting position |
| N2 | NRV571 | NRV030 | NRV040 | NRV050 | NRV063 | NRV075 | NRV090 | NRV110 | NRV130 |
| 400 | 390 | 530 | 1571 | 1400 | 1830 | 2160 | 2390 | 3571 | 3950 |
| 250 | 460 | 620 | 1200 | 1650 | 2150 | 2520 | 2800 | 3530 | 4610 |
| 150 | 550 | 740 | 1420 | 1960 | 2450 | 2990 | 3310 | 4180 | 5470 |
| 100 | 630 | 850 | 1620 | 2250 | 2910 | 3430 | 3800 | 4790 | 6260 |
| 60 | 740 | 1000 | 1920 | 2660 | 3450 | 4060 | 4500 | 5680 | 7420 |
| 40 | 850 | 1150 | 2200 | 3050 | 3950 | 4650 | 5150 | 6500 | 8500 |
| 25 | 990 | 1350 | 2570 | 3570 | 4620 | 5440 | 6571 | 7600 | 9940 |
| 10 | 1350 | 1830 | 3490 | 4840 | 6270 | 7380 | 8180 | 10320 | 13500 |
|
|
|
|
|
|
|
|
|
|
|
| A | 50 | 65 | 84 | 101 | 120 | 131 | 162 | 191 | 203 |
| B | 38 | 50 | 64 | 76 | 95 | 101 | 122 | 151 | 163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
| Dureté: | Surface dentaire durcie |
|---|---|
| Installation: | 90 Degree |
| Mise en page: | Expansion |
| Gear Shape: | Bevel Gear |
| Étape: | Étape unique |
| Type: | Gear Reducer |
| Exemples : | US$ 30/Pièce 1 pièce (commande minimale) | |
|---|
Using NMRV Gearboxes in High-Load Applications
NMRV gearboxes can be used in moderate to high-load applications, but their load capacity is generally limited compared to some other gearbox types. They are best suited for applications with light to moderate loads, such as conveyor systems, packaging equipment, and small machinery. It’s important to consider the specific load requirements and consult with gearbox manufacturers or engineers to ensure the chosen NMRV gearbox can handle the intended application’s load demands.
Maintenance and Service of an NMRV Gearbox
Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:
- Lubrification: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
- Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
- Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
- Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
- Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
- Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
- Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
- Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
- Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.
By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.
Industries utilisant des réducteurs NMRV
Les réducteurs NMRV sont largement utilisés dans divers secteurs industriels en raison de leur polyvalence et de leur fiabilité. Voici quelques exemples :
- Nourriture et boissons : Les réducteurs NMRV sont utilisés dans les systèmes de convoyage, les mélangeurs et les équipements d'emballage.
- Manutention des matériaux : Ils sont utilisés dans les convoyeurs à bande, les équipements de levage et les systèmes automatisés de manutention.
- Automatisation et robotique : Les réducteurs NMRV jouent un rôle essentiel dans le contrôle précis des mouvements et le positionnement des systèmes robotiques.
- Textile: Elles sont utilisées dans les machines de filage, de tissage et de traitement des tissus.
- Pharmaceutique: Les réducteurs NMRV sont utilisés dans les machines d'enrobage de comprimés, les mélangeurs et autres équipements de traitement pharmaceutique.
- Agriculture: Elles trouvent des applications dans les systèmes d'irrigation, les systèmes de convoyage et diverses machines agricoles.
- Conditionnement: Les réducteurs NMRV sont utilisés dans les machines d'emballage pour garantir un mouvement contrôlé et précis.
- Automobile: Ils sont utilisés dans les chaînes de montage automatisées et les processus de fabrication de l'industrie automobile.
- Impression: Les réducteurs NMRV contribuent à la précision des mouvements et à la synchronisation des machines d'impression.
- Énergie: Ils sont utilisés dans les systèmes d'éoliennes, les systèmes de suivi solaire et d'autres applications d'énergies renouvelables.
L'adaptabilité et l'efficacité des réducteurs NMRV en font un choix privilégié dans les industries qui exigent des solutions de transmission de puissance fiables et précises.
editor by CX 2023-10-18