उत्पाद वर्णन
उत्पाद पैरामीटर
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
विस्तृत तस्वीरें
| NMRV-063-30-VS–AS-80B5-0.75KW-B3 | |||
| एनएमआरवी | Means hole-input with flange | ||
| एनआरवी | Means shaft-input without flange | ||
| 063 | Centre-to-centre spacing of worm-gear speed reducer | ||
| 30 | ratio | ||
| VS | Double input shaft | F1(FA) | Flange putput shaft |
| AS | Single output shaft | AB | Double output shaft |
| PAM |
| 80B5 | Motor mounting facility |
| 0.75KW |
| B3 | माउंटिंग स्थिति |
| N2 | NRV571 | NRV030 | NRV040 | NRV050 | NRV063 | NRV075 | NRV090 | NRV110 | NRV130 |
| 400 | 390 | 530 | 1571 | 1400 | 1830 | 2160 | 2390 | 3571 | 3950 |
| 250 | 460 | 620 | 1200 | 1650 | 2150 | 2520 | 2800 | 3530 | 4610 |
| 150 | 550 | 740 | 1420 | 1960 | 2450 | 2990 | 3310 | 4180 | 5470 |
| 100 | 630 | 850 | 1620 | 2250 | 2910 | 3430 | 3800 | 4790 | 6260 |
| 60 | 740 | 1000 | 1920 | 2660 | 3450 | 4060 | 4500 | 5680 | 7420 |
| 40 | 850 | 1150 | 2200 | 3050 | 3950 | 4650 | 5150 | 6500 | 8500 |
| 25 | 990 | 1350 | 2570 | 3570 | 4620 | 5440 | 6571 | 7600 | 9940 |
| 10 | 1350 | 1830 | 3490 | 4840 | 6270 | 7380 | 8180 | 10320 | 13500 |
|
|
|
|
|
|
|
|
|
|
|
| A | 50 | 65 | 84 | 101 | 120 | 131 | 162 | 191 | 203 |
| B | 38 | 50 | 64 | 76 | 95 | 101 | 122 | 151 | 163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
| कठोरता: | कठोर दांत की सतह |
|---|---|
| स्थापना: | 90 डिग्री |
| लेआउट: | विस्तार |
| गियर का आकार: | आड़ी गरारी |
| कदम: | एकल-चरण |
| प्रकार: | गियर रिड्यूसर |
| उदाहरण: | US$ 30/पीस 1 पीस (न्यूनतम ऑर्डर) | |
|---|
Advantages of Using Worm Gear in an NMRV Gearbox
Worm gears offer several advantages when used in an NMRV gearbox:
1. High Reduction Ratio: Worm gears provide a high reduction ratio in a compact form, allowing for significant speed reduction in a single stage.
2. High Efficiency: While worm gears typically have lower mechanical efficiency compared to some other gear types, the design of the NMRV gearbox optimizes efficiency by using a bronze worm gear and a self-locking mechanism that minimizes backdriving.
3. Compact Design: Worm gears have a compact and space-efficient design, making them suitable for applications with limited installation space.
4. Smooth and Quiet Operation: The meshing of worm gears and the helical design of the worm result in relatively smooth and quiet operation.
5. Self-Locking: Worm gears inherently have a self-locking characteristic, meaning that the gear cannot easily be back-driven by the worm. This property is beneficial for applications where holding position without external locking mechanisms is essential.
6. High Torque Capacity: Worm gears can transmit high torque loads, making them suitable for applications that require high torque output.
7. Simple Lubrication: The design of the NMRV gearbox allows for efficient lubrication of the worm gear, ensuring optimal performance and longevity.
These advantages make worm gears a popular choice for NMRV gearboxes in various industrial applications, where their characteristics contribute to reliable and efficient power transmission.
एनएमआरवी गियरबॉक्स के उपयोग के लाभ
एनएमआरवी गियरबॉक्स कई फायदे प्रदान करते हैं जो उन्हें विभिन्न अनुप्रयोगों में एक लोकप्रिय विकल्प बनाते हैं:
- संक्षिप्त परिरूप: एनएमआरवी गियरबॉक्स कॉम्पैक्ट और कम जगह घेरने वाले होते हैं, जिससे वे सीमित स्थान वाले इंस्टॉलेशन के लिए उपयुक्त होते हैं।
- उच्च दक्षता: इन गियरबॉक्स को उच्च दक्षता के लिए डिज़ाइन किया गया है, जिससे बिजली संचरण के दौरान ऊर्जा हानि कम से कम हो।
- सुचारू संचालन: एनएमआरवी गियरबॉक्स अपने सटीक गियर संयोजन और डिजाइन के कारण सुचारू और विश्वसनीय संचालन प्रदान करते हैं।
- शांत प्रदर्शन: एनएमआरवी गियरबॉक्स का डिजाइन और गुणवत्ता शांत संचालन में योगदान करते हैं, जिससे विभिन्न अनुप्रयोगों में शोर का स्तर कम होता है।
- प्रभावी लागत: उनकी कुशल निर्माण प्रक्रिया और टिकाऊपन एनएमआरवी गियरबॉक्स को विद्युत संचरण के लिए एक लागत प्रभावी विकल्प बनाते हैं।
- अनुपात की विस्तृत श्रृंखला: एनएमआरवी गियरबॉक्स विभिन्न प्रकार के गियर अनुपात में उपलब्ध हैं, जिससे उपयोगकर्ता अपनी विशिष्ट अनुप्रयोग आवश्यकताओं के लिए सबसे उपयुक्त विकल्प का चयन कर सकते हैं।
- संक्षारण प्रतिरोध: कई एनएमआरवी गियरबॉक्स ऐसे पदार्थों से निर्मित होते हैं जो संक्षारण प्रतिरोधक क्षमता प्रदान करते हैं, जिससे कठोर वातावरण में उनकी दीर्घायु और प्रदर्शन में वृद्धि होती है।
- आसान स्थापना: एनएमआरवी गियरबॉक्स का कॉम्पैक्ट और हल्का डिजाइन उन्हें विभिन्न प्रणालियों में स्थापित करना और एकीकृत करना अपेक्षाकृत आसान बनाता है।
- कम रखरखाव: उचित स्नेहन और रखरखाव के साथ, एनएमआरवी गियरबॉक्स न्यूनतम रखरखाव आवश्यकताओं के साथ लंबे समय तक चल सकते हैं।
- बहुमुखी प्रतिभा: एनएमआरवी गियरबॉक्स बहुमुखी हैं और इनका उपयोग औद्योगिक मशीनरी से लेकर कन्वेयर सिस्टम तक विभिन्न प्रकार के अनुप्रयोगों में किया जा सकता है।
ये सभी लाभ मिलकर उन उद्योगों में एनएमआरवी गियरबॉक्स की लोकप्रियता में योगदान करते हैं जहां कुशल और विश्वसनीय बिजली संचरण महत्वपूर्ण है।
Key Features of an NMRV Gearbox
NMRV gearboxes, also known as worm gear reducers, offer several key features that make them suitable for various applications:
- संक्षिप्त परिरूप: NMRV gearboxes are known for their compact and space-saving design, making them ideal for installations with limited space.
- उच्च दक्षता: These gearboxes offer relatively high efficiency levels, which ensures efficient power transmission and reduced energy loss.
- Speed Reduction: NMRV gearboxes are primarily used for speed reduction applications, where the input speed is reduced while torque is increased.
- Torque Multiplication: The worm and worm wheel mechanism allows for torque multiplication, making NMRV gearboxes suitable for applications requiring high torque output.
- Self-Locking: The helical design of the worm causes self-locking, preventing the output shaft from back-driving the input shaft and providing mechanical locking.
- सुचारू संचालन: NMRV gearboxes offer smooth and quiet operation, making them suitable for applications where noise reduction is important.
- Wide Range of Ratios: These gearboxes come in a wide range of gear ratios, allowing users to select the appropriate ratio for their specific application.
- कम रखरखाव: The simple design and few moving parts contribute to the low maintenance requirements of NMRV gearboxes.
- बहुमुखी प्रतिभा: NMRV gearboxes are versatile and can be used in various industries and applications, including conveyor systems, food processing, packaging, and more.
It’s important to consider these key features when selecting an NMRV gearbox for your specific application to ensure optimal performance and efficiency.
editor by CX 2023-11-30