China Custom Customerized Chinese manufacture RV Series Nmrv Worm Gear Box automatic gearbox

Deskripsi Produk

RV series Characteristics

• RV – Sizes:–150
• Input Options: with input shaft, With Square flange,With Input Flange
• Input Power 0.06 to 11 kW
• RV-Size from 030 to 105 in die-cast aluminium alloy budy and over 110 in cast iron
• Ratios between 5 and 100
• Max torque 1550 N.m and admissible output radial loads max 8771 N
• Aluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantity
• Worm wheel: Copper (KK Cu).
• Loading capacity in accordance with: ISO 9001:2015/GB/T 19001-2016
• Size 030 and over are painted with RAL 5571 blue
• Worm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, JWB+NMRV
• NMRV, NRV+VS,NMRV+AS,NMRV+VS,NMRV+F
• Options: torque arm, output flange, viton oil seals, low/high temperature oil, filling/drain/breather/level plug,Small gap

Basic models can be applied to a wide range of power reduction ratios from 5 to 1000.
Warranty: One year from date of delivery.

 

WORM GEARBOX
SNW SERIES					Output Speed Range:
Type	Old Type	Torsi Keluaran	Output Shaft Dia.		14rpm-280rpm
SNW030	RV030	21N.m	φ14		Applicable Motor Power:
SNW040	RV040	45N.m	φ19		0.06kW-11kW
SNW050	RV050	84N.m	φ25		Input Options1:
SNW063	RV063	160N.m	φ25		With Inline AC Motor
SNW075	RV075	230N.m	φ28		Input Options2:
SNW090	RV090	410N.m	φ35		With Square flange
SNW105	RV105	630N.m	φ42		Input Options3:
SNW110	RV110	725N.m	φ42		With Input Shaft
SNW130	RV130	1050N.m	φ45		Input Options4:
SNW150	RV150	1550N.m	φ50		With Input Flange

Starshine Drive

ZheJiang CHINAMFG Drive Co.,Ltd,the predecessor was a state-owned military mould enterprise, was established in 1965. CHINAMFG specializes in the complete power transmission solution for high-end equipment manufacturing industries based on the aim of “Platform Product, Application Design and Professional Service”.
Starshine have a strong technical force with over 350 employees at present, including over 30 engineering technicians, 30 quality inspectors, covering an area of 80000 square CHINAMFG and kinds of advanced processing machines and testing equipments. We have a good foundation for the industry application development and service of high-end speed reducers & variators owning to the provincial engineering technology research center,the lab of gear speed reducers, and the base of modern R&D.

Our Team

Quality Control
Quality:Insist on Improvement,Strive for Excellence With the development of equipment manufacturing indurstry,customer never satirsfy with the current quality of our products,on the contrary,wcreate the value of quality.
Quality policy:to enhance the overall level in the field of power transmission  
Quality View:Continuous Improvement , pursuit of excellence
Quality Philosophy:Quality creates value

3. Incoming Quality Control
To establish the AQL acceptable level of incoming material control, to provide the material for the whole inspection, sampling, immunity. On the acceptance of qualified products to warehousing, substandard goods to take return, check, rework, rework inspection; responsible for tracking bad, to monitor the supplier to take corrective measures
 to prevent recurrence.

4. Process Quality Control
The manufacturing site of the first examination, inspection and final inspection, sampling according to the requirements of some projects, judging the quality change trend;
 found abnormal phenomenon of manufacturing, and supervise the production department to improve, eliminate the abnormal phenomenon or state.

5. FQC(Final QC)
After the manufacturing department will complete the product, stand in the customer’s position on the finished product quality verification, in order to ensure the quality of 
customer expectations and needs.

6. OQC(Outgoing QC)
After the product sample inspection to determine the qualified, allowing storage, but when the finished product from the warehouse before the formal delivery of the goods, there is a check, this is called the shipment inspection.Check content:In the warehouse storage and transfer status to confirm, while confirming the delivery of the product
 is a product inspection to determine the qualified products.

Packing

Delivery

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aplikasi:	Motor, Machinery
Kekerasan:	Soft Tooth Surface
Instalasi:	90 Degree
Melangkah:	Langkah Tunggal
Type:	Worm Reducer
Gearing Arrangement:	Worm

Customization:	Available | Customized Request

Troubleshooting Abnormal Noises in an NMRV Gearbox

Abnormal noises from an NMRV gearbox can be troublesome and might indicate underlying issues. Follow these steps to troubleshoot and resolve the problem:

1. Identify the Noise: Listen closely to the noise and determine if it’s a grinding, whining, or knocking sound.
2. Check Lubrication: Insufficient or contaminated lubrication can lead to noises. Ensure the gearbox is properly lubricated.
3. Inspect Gears: Examine the gear teeth for wear, damage, or misalignment.
4. Look for Foreign Objects: Foreign objects inside the gearbox can cause noise. Clean and inspect the interior.
5. Check Bearings: Worn or damaged bearings can be noisy. Inspect and replace them if necessary.
6. Inspect Seals: Damaged seals can allow contaminants in, affecting performance. Replace damaged seals.
7. Examine Housing: Ensure the gearbox housing is intact without cracks or misalignment.
8. Review Load Conditions: Excessive loads can lead to noise. Ensure the gearbox isn’t overloaded.
9. Check Mounting: Confirm the gearbox is properly mounted and aligned.
10. Consult Guidelines: Refer to manufacturer guidelines for specific troubleshooting steps.
11. Professional Help: If the issue persists, seek help from a professional technician or manufacturer.

Follow these steps to identify and rectify abnormal noises in your NMRV gearbox.

Prinsip Desain Kotak Gigi NMRV

Desain gearbox NMRV (roda gigi cacing) didasarkan pada prinsip-prinsip utama yang memungkinkan pengoperasiannya yang efisien dan andal:

• Mekanisme Roda Gigi Cacing: Komponen inti dari gearbox NMRV adalah ulir cacing dan roda gigi cacing. Ulir cacing, yang biasanya berbentuk silinder, berpasangan dengan gigi roda gigi cacing. Konfigurasi ini memberikan rasio reduksi gigi yang tinggi.
• Roda Gigi Heliks: Sekrup cacing biasanya berbentuk heliks, memungkinkan pengaitan yang lebih halus dengan roda cacing. Roda gigi heliks mengurangi gesekan geser dan kebisingan yang terkait dengan roda gigi cacing lurus tradisional.
• Desain Ringkas: Kotak roda gigi NMRV dirancang agar ringkas, seringkali dengan konfigurasi sudut siku-siku. Hal ini memungkinkan penggunaan ruang yang efisien dalam berbagai aplikasi.
• Konstruksi Paduan: Banyak kotak roda gigi NMRV dibuat dari paduan berkualitas tinggi, yang memberikan daya tahan dan ketahanan terhadap korosi. Pemilihan material memastikan kotak roda gigi mampu menahan berbagai beban dan kondisi lingkungan.
• Dukungan Bantalan: Bantalan menopang elemen-elemen yang berputar di dalam gearbox, mengurangi gesekan dan memastikan pengoperasian yang lancar. Bantalan ditempatkan secara strategis untuk menangani beban radial dan aksial.
• Penyegelan dan Pelumasan: Kotak roda gigi NMRV dilengkapi dengan mekanisme penyegelan yang efektif untuk mencegah masuknya kontaminan dan mempertahankan oli pelumas. Pelumasan yang tepat sangat penting untuk mengurangi keausan dan meningkatkan efisiensi kotak roda gigi.
• Transmisi Daya yang Efisien: Mekanisme roda gigi cacing pada kotak roda gigi NMRV memberikan rasio reduksi gigi yang tinggi, memungkinkan transmisi daya yang efisien sekaligus meminimalkan kehilangan energi.
• Pengoperasian Senyap: Desain heliks pada ulir cacing dan roda cacing berkontribusi pada pengoperasian yang lebih senyap dibandingkan dengan roda gigi cacing potong lurus tradisional.
• Beragam Rasio: Kotak roda gigi NMRV tersedia dalam berbagai rasio gigi, memungkinkan pengguna untuk memilih konfigurasi yang sesuai dengan kebutuhan aplikasi spesifik mereka.

Kombinasi prinsip-prinsip desain ini menghasilkan gearbox NMRV yang menawarkan transmisi daya yang efisien, andal, dan senyap untuk berbagai aplikasi industri.

Choosing the Right Size NMRV Gearbox for Your Application

Selecting the appropriate size NMRV gearbox for your application involves considering several important factors:

• Input Power: Determine the power requirement of your application, including both the input speed and the required output torque.
• Service Factor: Take into account any potential overloads or unexpected conditions that may occur during operation. Applying a service factor ensures the gearbox can handle occasional peak loads.
• Output Speed: Calculate the desired output speed of the gearbox. This is crucial for ensuring the gearbox meets the requirements of your application.
• Operating Conditions: Consider the environmental conditions in which the gearbox will operate, including temperature, humidity, and exposure to dust or chemicals.
• Mounting and Space: Evaluate the available space for mounting the gearbox and ensure it fits within the allotted dimensions.
• Shaft Configuration: Determine whether the gearbox requires a specific shaft configuration or if additional components such as couplings are needed.
• Application Type: Consider the type of application the gearbox will be used in, such as conveyor systems, agitators, mixers, or other specific applications.
• Load Characteristics: Analyze the load characteristics, including the type of load (constant, intermittent, shock), to ensure the gearbox can handle the load variations.

It’s essential to work closely with gearbox manufacturers or distributors who can provide technical support and assist in selecting the right size NMRV gearbox based on your specific application requirements.

editor by CX 2024-01-10