Deskripsi Produk
| Nama Produk | Unit roda gigi heliks-hipoid desain baru, gearbox seri KM, peredam kecepatan, motor peredam. |
| Seri | kotak roda gigi heliks |
| Aplikasi | Transmisi Daya |
| Bantalan | Merek ternama Tiongkok seperti HRB, LYC, ZWZ atau merek lain yang diminta, NSK….. |
| Digunakan | mesin industri |
Seri Km Paduan Aluminium Rasio 7,5~300 Motor Gear Hypoid 90 Derajat Gearbox Reduksi Hypoid Vertikal dengan Motor Listrik
Parameter Produk
| Industri yang Berlaku | Toko Pakaian, Pabrik Manufaktur, Bengkel Perbaikan Mesin, Pabrik Makanan & Minuman |
| Susunan Gigi | Hipoid |
| Torsi Keluaran | 100~500NM |
| Kecepatan Masukan | 1400 rpm |
| Kecepatan Keluaran | 5~187 |
| Tempat Asal | Cina |
| Nama Merek | HUAKE |
| Nama Produk | Pereduksi roda gigi hipoid |
| Warna | Biru |
| Perbandingan | 5-400 |
| Sertifikat | ISO9001 CCC CE |
Profil Perusahaan
Sertifikasi
Pengemasan & Pengiriman
Pertanyaan yang Sering Diajukan (FAQ)
| Aplikasi: | Motor, Mobil Listrik, Sepeda Motor, Mesin, Kelautan, Mainan, Mesin Pertanian, Mobil, Suku Cadang Transmisi |
|---|---|
| Fungsi: | Distribusi Daya, Kopling, Perubahan Torsi Penggerak, Perubahan Arah Penggerak, Perubahan Kecepatan, Pengurangan Kecepatan, Peningkatan Kecepatan |
| Tata letak: | Sikloidal |
| Kekerasan: | Permukaan Gigi yang Mengeras |
| Instalasi: | Jenis Lengan Torsi |
| Melangkah: | Langkah Tunggal |
| Contoh: | US$ 80/Buah 1 Buah (Minimum Pemesanan) | |
|---|
Calculating Torque Requirements for an NMRV Gearbox
Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.
- Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
- Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
- Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
- Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.
Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency
Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.
Lubrication for an NMRV Gearbox
Lubrication is essential for the proper functioning and longevity of an NMRV gearbox. The type and amount of lubricant required may vary depending on the gearbox model and manufacturer. Here are the general lubrication practices:
- Recommended Lubricants: Use the lubricants specified by the gearbox manufacturer. Typically, high-quality gear oils with the appropriate viscosity and additives are recommended.
- Initial Fill: Prior to the gearbox’s first operation, ensure that it is properly filled with the recommended lubricant to the correct level. Follow the manufacturer’s guidelines for the proper quantity.
- Lubricant Change: Regularly change the lubricant according to the manufacturer’s recommended intervals. Over time, lubricants can degrade due to heat and contamination, which can affect gearbox performance.
- Temperature Considerations: Gearboxes operating in extreme temperatures may require lubricants with specific temperature ranges to ensure proper viscosity and protection.
- Checking Levels: Periodically check the lubricant level in the gearbox to ensure it is within the specified range. This can prevent damage caused by insufficient lubrication.
- Oil Analysis: Some gearbox systems benefit from regular oil analysis to monitor lubricant condition and identify potential issues before they cause significant damage.
Proper lubrication practices contribute to reduced friction, wear, and heat generation within the NMRV gearbox, leading to improved efficiency and extended lifespan.
Key Features of an NMRV Gearbox
NMRV gearboxes, also known as worm gear reducers, offer several key features that make them suitable for various applications:
- Desain Ringkas: NMRV gearboxes are known for their compact and space-saving design, making them ideal for installations with limited space.
- High Efficiency: These gearboxes offer relatively high efficiency levels, which ensures efficient power transmission and reduced energy loss.
- Speed Reduction: NMRV gearboxes are primarily used for speed reduction applications, where the input speed is reduced while torque is increased.
- Torque Multiplication: The worm and worm wheel mechanism allows for torque multiplication, making NMRV gearboxes suitable for applications requiring high torque output.
- Self-Locking: The helical design of the worm causes self-locking, preventing the output shaft from back-driving the input shaft and providing mechanical locking.
- Smooth Operation: NMRV gearboxes offer smooth and quiet operation, making them suitable for applications where noise reduction is important.
- Beragam Rasio: These gearboxes come in a wide range of gear ratios, allowing users to select the appropriate ratio for their specific application.
- Low Maintenance: The simple design and few moving parts contribute to the low maintenance requirements of NMRV gearboxes.
- Versatility: NMRV gearboxes are versatile and can be used in various industries and applications, including conveyor systems, food processing, packaging, and more.
It’s important to consider these key features when selecting an NMRV gearbox for your specific application to ensure optimal performance and efficiency.
editor by CX 2023-11-29