카테고리: 블로그

China Best Sales NMRV Series Hollow Shaft/Aluminum Worm Gear Reducer/gear/gearbox for Motor/Car/Auto wholesaler

제품 설명

GRANVILLE GEARBOX REDUCER
> Work with the largest manufacturers of worm gear reducer and door operators in Asia boasts the best machining and inspecting facilities in the world.

> Over years self- development and introduction of technology from Japan, Italy, and Germany with our partner, Granville transmission
products are widely used in the industry of metallurgy, mining, electronics, construction, conveying, chemical, textile, food, medicine, printing, rubber, and nation and defense.

> The factory not only has an advanced quality control system but the world a modern production facility.

WHAT WE DO

01 Introduction
> Granville manufactures standard and custom gear drives for industrial and specialty applications. The product line is the most extensive line of gear reducers in China and offers a solution for every power transmission need.

02 Advantages
> Comprehensive range
> The best machining and inspecting facilities
> Correcting alignment issues in dock or in operation
> Has a large portfolio of various bearings and housings meet the industry’s need
> Perfect sealing, minimize risk of leakage and environmental impact
> Offers a range of oil and grease lubrication solutions

MAIN PRODUCTS

1	Warm Gear Reducer
2	SKRF Helical Geared Motors
3	Gate Operators
4	Cyclo Drive Reducer
5	Screw Actuater
6	Coupling

GIL Aluminum Case Worm Gears

SPECIES
모델	571 , 030 , 040 , 050 , 063 , 075 , 090 , 110 , 130 , 150
MOTOR POWER	0.06KW ~ 15KW
GEAR RATIO	1/5 UP TO 1/1500
INPUT BORE DIA. Ø mm	9 , 11 , 14 , 19 , 24 , 28 , 38 , 42
OUTPUT HOLLOW SHAFT DIA. Ø mm	11 , 14 , 18 , 25 , 28 , 35 , 42 , 45 , 50

AVAILABLE ACCESSORIES :

FA-O/P TYPE : LONG TYPE OUTPUT FLANGE

FB-O/P TYPE : SHORT TYPE OUTPUT FLANGE

DS-O/P TYPE : DOUBLE OUTPUT SHAFT

SS-O/P TYPE : SINGLE OUTPUT SHAFT

TA-O/P TYPE : TORQUE ARM

CV-O/P TYPE : OUTPUT COVER

PC UNIT TYPE : REDUCER PC UNIT

ADVANTAGES AND FEATURES
LIGHT WEIGHT	One-piece aluminum alloy housing for lightweight strength
DUTABLE	Hardened worm shaft for increased durability
LUBRICATED	All units filled with synthetic oil for an M1 position mounting
REASONABLE	Adjust oil level for alternative mounting positions
LEAK-PROOF	Double lip oil seals prevent leakage
EASY INSTALLATION	Multiple mounting holes for all angle mounts
RUST-PROOF	Powder coat paint plan on external housing to resist corrosion
HOLLOW OUTPUT BORES	Hollow output bores with plug-in output shafts
FACTORY WARRANTY	1 year warranty

PRODUCTS YOU MAY LIKE
NMRV SERIES
product/sdFAfxjYJGaE/China-NMRV-Series-Hollow-Shaft-Aluminum-Worm-Gear-Reducer-gear-gearbox-for-Motor-Car-Auto.html
SKRF SERIES
S SERIES
product/KwZtdlDHLfTe/China-GIL-S-Series-Helical-Worm-Gear-Motor.html
K SERIES
product/mZfAKSTGIpaD/China-GIL-K-SERIES-HELICAL-BEVEL-GEAR-MOTOR-K-SERIES-Two-Stage-and-Three-Stage-.html
R SERIES
product/SZdTgIvOftAU/China-GIL-R-SERIES-HELICAL-GEAR-MOTOR-R-RF-SERIES-Two-Stage-and-Three-Stage-.html
F SERIES
product/AZfaWFUxuptR/China-GIL-F-SERIES-HELICAL-BEVEL-GEAR-MOTOR-F-SERIES-Two-Stage-and-Three-Stage-.html

Shipping Cost: Estimated freight per unit.	To be negotiated

애플리케이션:	Motor, Electric Cars, Motorcycle, Machinery, Agricultural Machinery
기어 모양:	Bevel Gear
Type:	Worm Reducer

Samples:	US$ 1/Set 1 Set(Min.Order) \| Order Sample

맞춤 설정:	사용 가능 \| 맞춤형 요청

NMRV 변속기의 토크 요구량 계산

NMRV 변속기의 토크 요구량을 계산하는 데는 입력 토크 확인, 출력 토크 계산, 효율 고려, 안전 여유 추가 등 여러 단계가 포함됩니다.

입력 토크를 식별하십시오: 부하, 속도, 효율 등의 요소를 고려하여 해당 응용 분야에 필요한 입력 토크를 결정하십시오.
출력 토크를 계산합니다. NMRV 변속기의 기어비를 이용하여 원하는 출력 속도를 달성하는 데 필요한 출력 토크를 계산하십시오.
효율성을 고려하세요: NMRV 변속기의 효율을 고려해야 합니다. 실제 출력 토크는 변속기의 기계적 효율에 영향을 받습니다.
안전 마진을 추가하세요: 안정적인 성능을 보장하고 작동 조건의 변화를 고려하기 위해 계산된 토크 요구 사항에 안전 여유를 추가하는 것이 좋습니다.

출력 토크 계산 공식: 출력 토크 = 입력 토크 × 기어비 × 변속기 효율

토크 요구 사항은 특정 적용 분야 및 부하 유형, 작동 주기, 환경 조건과 같은 요인에 따라 달라질 수 있다는 점을 유념하십시오. 기어박스 제조업체 또는 엔지니어링 전문가와 상담하면 NMRV 기어박스 적용 분야에 맞는 정확한 토크 계산을 할 수 있습니다.

Maintenance and Service of an NMRV Gearbox

Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:

Lubrication: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.

By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.

Key Features of an NMRV Gearbox

NMRV gearboxes, also known as worm gear reducers, offer several key features that make them suitable for various applications:

컴팩트한 디자인: NMRV gearboxes are known for their compact and space-saving design, making them ideal for installations with limited space.
고효율: These gearboxes offer relatively high efficiency levels, which ensures efficient power transmission and reduced energy loss.
Speed Reduction: NMRV gearboxes are primarily used for speed reduction applications, where the input speed is reduced while torque is increased.
Torque Multiplication: The worm and worm wheel mechanism allows for torque multiplication, making NMRV gearboxes suitable for applications requiring high torque output.
Self-Locking: The helical design of the worm causes self-locking, preventing the output shaft from back-driving the input shaft and providing mechanical locking.
원활한 작동: NMRV gearboxes offer smooth and quiet operation, making them suitable for applications where noise reduction is important.
Wide Range of Ratios: These gearboxes come in a wide range of gear ratios, allowing users to select the appropriate ratio for their specific application.
유지보수가 적음: The simple design and few moving parts contribute to the low maintenance requirements of NMRV gearboxes.
다재: NMRV gearboxes are versatile and can be used in various industries and applications, including conveyor systems, food processing, packaging, and more.

It’s important to consider these key features when selecting an NMRV gearbox for your specific application to ensure optimal performance and efficiency.

editor by CX 2023-09-26

에피소드