제품 설명
SC Transmission Worm Gearbox NMRV/NRV SERIES
NMRV/NMRV-P 040/063-1250 PAM56 B5 double worm gearbox
제품 설명
| Type: | NMRV/NRV |
| Model: | –130-150 |
| Ratio: | 1:5, 7.5, 10,15,20,25,30,40,50,60,80,100 |
| Color: | Blue/Silver/Grey Or Customer Request |
| Material: | Housing: Die-Cast Aluminum Alloy from 571-090 |
| Housing: Iron cast from 110-150 | |
| Worm Gear Copper: 9-4/12-2 | |
| Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC | |
| Packing: | Carton+Wooden Case |
| Bearing: | C&U Bearing |
| Seal: | CHINAMFG OTHER |
| Warranty: | 1년 |
| Input Power: | 0.06KW,0.09KW…to 11 kW. |
| Usages: | Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass. |
| IEC Flange: | 56B14, 63B14, 63B5, 63B5, 71B14,80B14… |
| Lubricant: | Synthetic&Mineral |
| Options: | Torque arm, output flange, viton oil seals, low/high temperature oil, filling/drain/breather/level plug. |
| Combinations: | NMRV+NRV |
Our Workshop
FAQ
Shipping
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| 애플리케이션: | Motor, Machinery, Agricultural Machinery |
|---|---|
| 설치: | 90 Degree |
| 단계: | 단일 단계 |
| Type: | Worm Reducer |
| Output Torque: | 2.6n.M-1195n.M |
| Input: | Flange or Shaft |
| Samples: | US$ 50/Piece 1 Piece(Min.Order) | |
|---|
| 맞춤 설정: | 사용 가능 | 맞춤형 요청 |
|---|
NMRV 변속기의 토크 요구량 계산
NMRV 변속기의 토크 요구량을 계산하는 데는 입력 토크 확인, 출력 토크 계산, 효율 고려, 안전 여유 추가 등 여러 단계가 포함됩니다.
- 입력 토크를 식별하십시오: 부하, 속도, 효율 등의 요소를 고려하여 해당 응용 분야에 필요한 입력 토크를 결정하십시오.
- 출력 토크를 계산합니다. NMRV 변속기의 기어비를 이용하여 원하는 출력 속도를 달성하는 데 필요한 출력 토크를 계산하십시오.
- 효율성을 고려하세요: NMRV 변속기의 효율을 고려해야 합니다. 실제 출력 토크는 변속기의 기계적 효율에 영향을 받습니다.
- 안전 마진을 추가하세요: 안정적인 성능을 보장하고 작동 조건의 변화를 고려하기 위해 계산된 토크 요구 사항에 안전 여유를 추가하는 것이 좋습니다.
출력 토크 계산 공식: 출력 토크 = 입력 토크 × 기어비 × 변속기 효율
토크 요구 사항은 특정 적용 분야 및 부하 유형, 작동 주기, 환경 조건과 같은 요인에 따라 달라질 수 있다는 점을 유념하십시오. 기어박스 제조업체 또는 엔지니어링 전문가와 상담하면 NMRV 기어박스 적용 분야에 맞는 정확한 토크 계산을 할 수 있습니다.
Lubrication for an NMRV Gearbox
Lubrication is essential for the proper functioning and longevity of an NMRV gearbox. The type and amount of lubricant required may vary depending on the gearbox model and manufacturer. Here are the general lubrication practices:
- Recommended Lubricants: Use the lubricants specified by the gearbox manufacturer. Typically, high-quality gear oils with the appropriate viscosity and additives are recommended.
- Initial Fill: Prior to the gearbox’s first operation, ensure that it is properly filled with the recommended lubricant to the correct level. Follow the manufacturer’s guidelines for the proper quantity.
- Lubricant Change: Regularly change the lubricant according to the manufacturer’s recommended intervals. Over time, lubricants can degrade due to heat and contamination, which can affect gearbox performance.
- Temperature Considerations: Gearboxes operating in extreme temperatures may require lubricants with specific temperature ranges to ensure proper viscosity and protection.
- Checking Levels: Periodically check the lubricant level in the gearbox to ensure it is within the specified range. This can prevent damage caused by insufficient lubrication.
- Oil Analysis: Some gearbox systems benefit from regular oil analysis to monitor lubricant condition and identify potential issues before they cause significant damage.
Proper lubrication practices contribute to reduced friction, wear, and heat generation within the NMRV gearbox, leading to improved efficiency and extended lifespan.
Using an NMRV Gearbox
An NMRV gearbox, also known as a worm gear reducer, is commonly used for various applications that require speed reduction, torque multiplication, and smooth power transmission. This type of gearbox offers several benefits:
- 컴팩트한 디자인: NMRV gearboxes have a compact and space-saving design, making them suitable for applications with limited installation space.
- High Gear Ratio: Worm gear reducers can achieve high gear ratios in a single stage, making them ideal for applications where a significant reduction in speed is needed.
- Quiet Operation: The meshing of the worm gear and worm wheel results in low noise levels during operation.
- Simple Operation: NMRV gearboxes have a simple design with fewer components, leading to ease of operation and maintenance.
- Reliable and Durable: Worm gear reducers are known for their reliability and durability, making them suitable for continuous and heavy-duty applications.
Common applications of NMRV gearboxes include:
- Conveyor systems
- Material handling equipment
- Industrial machinery
- Automated systems
- Food processing equipment
- Packaging machinery
Due to their versatility and ability to provide precise speed reduction, NMRV gearboxes are widely used in various industries to optimize the performance of different types of machinery and equipment.
editor by CX 2024-01-26