{"id":865,"date":"2026-06-26T03:00:54","date_gmt":"2026-06-26T03:00:54","guid":{"rendered":"https:\/\/nmrv063gearbox.com\/worm-gear-reducer-for-feed-mixers\/"},"modified":"2026-06-26T03:00:55","modified_gmt":"2026-06-26T03:00:55","slug":"worm-gear-reducer-for-feed-mixers","status":"publish","type":"post","link":"https:\/\/nmrv063gearbox.com\/ko\/worm-gear-reducer-for-feed-mixers\/","title":{"rendered":"\uc0ac\ub8cc \ud63c\ud569\uae30\uc6a9 \uc6dc \uae30\uc5b4 \uac10\uc18d\uae30"},"content":{"rendered":"
\n

<\/p>\n

\uc0ac\ub8cc \ud63c\ud569\uae30\uc6a9 \uc6dc \uae30\uc5b4 \uac10\uc18d\uae30<\/h2>\n

\"\uc0ac\ub8cc<\/p>\n

Feed mixers — vertical auger mixers, horizontal paddle mixers, and reel-type total mixed ration (TMR) wagons — are the central processing equipment in Australian cattle feedlots, sheep stations, and dairy farms. They must mix dry fodder, silage, concentrates, and minerals into a homogeneous ration under varying load conditions, often operating for multiple hours per day. The \uc6dc \uae30\uc5b4 \uac10\uc18d\uae30<\/strong> provides the low-speed, high-torque drive required by mixing augers and paddles from a standard motor, in a compact sealed unit that requires minimal maintenance and can be serviced on-farm.<\/p>\n

Australian livestock properties — particularly remote cattle stations in Queensland and the Northern Territory — often operate feed mixer equipment for months between access to qualified mechanical technicians. The worm reducer’s low-maintenance design — oil-bath lubrication, sealed housing, no chains or belts to adjust — is a significant operational advantage in these remote settings. A single annual oil change and seal inspection is the complete maintenance requirement for most installations.<\/p>\n

The self-locking property of worm gearboxes also benefits feed mixer applications: when the drive is stopped between mixing batches, the auger or paddle remains stationary without a brake, preventing the load from slowly rotating under gravity and spilling partial batches during loading or discharge operations.<\/p>\n

<\/p>\n

\uc0b0\uc5c5 \ubd84\uc57c\ubcc4 \uc801\uc6a9 \uc0ac\ub840 \ubc0f \ud65c\uc6a9 \uc0ac\ub840<\/h2>\n

Worm reducers are found throughout feed processing and mixing systems on Australian livestock properties:<\/p>\n

    \n
  • Vertical auger TMR mixer drive<\/strong> — single or twin auger drive at 20–60 RPM, high starting torque against dense silage<\/li>\n
  • Horizontal paddle mixer drive<\/strong> — slow rotary paddle action for gentle mixing of feed components<\/li>\n
  • Reel mixer wagon drive<\/strong> — controlled rotation of the mixing reel and discharge conveyor<\/li>\n
  • Feed auger hopper discharge drive<\/strong> — controlled volumetric discharge from feed storage hopper<\/li>\n
  • Mineral and molasses dosing drive<\/strong> — precise low-speed metering of liquid and solid supplements<\/li>\n<\/ul>\n

    Material specification for feed mixer service:<\/strong> Worm shaft in carbon steel with precision-ground helical thread and surface hardening. Worm wheel in cast phosphor bronze — the low friction coefficient is particularly important in feed mixer service where the gearbox may run 4–8 hours per day. Housing in cast iron with heat-dissipation fin casting. IP54 sealing as minimum; IP65 for outdoor feedlot environments exposed to dust storms and rain.<\/p>\n

    Starting torque requirements:<\/strong> Feed mixers have exceptionally high starting torque requirements — frozen or compacted silage can require 3–5× the running torque to break initial static friction. A service factor of SF=1.5 is recommended for standard feed mixer service, increasing to SF=2.0 for mixers handling frozen feed in winter months.<\/p>\n

    <\/p>\n

    \n \"Worm\n<\/div>\n

    <\/p>\n

    \uae30\uc220 \uc0ac\uc591 \ubc0f \uc120\ud0dd \uac00\uc774\ub4dc<\/h2>\n

    \uc544\ub798 \ud45c\ub97c \uc0ac\uc6a9\ud558\uc5ec \uc801\uc808\ud55c \ubaa8\ub378\uc744 \uc120\ud0dd\ud558\uc2ed\uc2dc\uc624. \uc8fc\uc694 \ub9e4\uac1c\ubcc0\uc218\uc5d0\ub294 \uac10\uc18d\ube44, \ucd9c\ub825 \ud1a0\ud06c, \ucd95 \uce58\uc218 \ubc0f \ud558\uc6b0\uc9d5 \uc7ac\uc9c8\uc774 \ud3ec\ud568\ub429\ub2c8\ub2e4. \ud56d\uc0c1 \uc62c\ubc14\ub978 \uac12\uc744 \uc801\uc6a9\ud558\uc2ed\uc2dc\uc624. \uc11c\ube44\uc2a4 \ud329\ud130(SF)<\/strong> \uc0ac\uc6a9\ub960\uc5d0 \ub530\ub77c \ub2e4\ub985\ub2c8\ub2e4.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n
    \ub9e4\uac1c\ubcc0\uc218<\/th>\n\uc77c\ubc18\uc801\uc778 \ubc94\uc704\/\uac12<\/th>\n\uc120\ud0dd \ucc38\uace0 \uc0ac\ud56d<\/th>\n<\/tr>\n<\/thead>\n
    \ube44\uc728<\/td>\n20:1 – 60:1 typical for mixers<\/td>\nProvides 25–70 RPM output from standard 4-pole motor<\/td>\n<\/tr>\n
    \ucd9c\ub825 \ud1a0\ud06c<\/td>\n200 – 3,000 N·m<\/td>\nApply SF 1.5; increase to 2.0 for cold-start frozen silage duty<\/td>\n<\/tr>\n
    \uc785\ub825 \uc0e4\ud504\ud2b8<\/td>\nIEC B5\/B14 flange, IEC 60034<\/strong><\/td>\nDirect-mount to farm-standard single or three-phase motors<\/td>\n<\/tr>\n
    Output Shaft<\/td>\nSolid keyed or hollow bore<\/td>\nHollow bore for direct auger shaft pass-through<\/td>\n<\/tr>\n
    \uc8fc\ud0dd \uc790\uc7ac<\/td>\nCast Iron with fin casting<\/td>\nEssential for continuous 4+ hour mixer duty thermal management<\/td>\n<\/tr>\n
    Shaft Seals<\/td>\nDouble-lip NBR; FKM for wet\/chemical feed<\/td>\nUpgrade to FKM for mixers handling liquid supplements or acids<\/td>\n<\/tr>\n
    \ubcf4\ud638 \ub4f1\uae09<\/td>\nIP54 indoor; IP65 outdoor feedlot<\/td>\nIP65 for dusty Australian feedlot environments<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    ► \uc11c\ube44\uc2a4 \ud329\ud130(SF):<\/strong> \uade0\uc77c \ud558\uc911 SF=1.0 | \uc911\uac04 \ucda9\uaca9 SF=1.25\u20131.5 | \uac15\ud55c \ucda9\uaca9 \/ 24\uc2dc\uac04 \uc5f0\uc18d SF=1.75\u20132.0<\/p>\n

    ► \uc8fc\ubcc0 \uc628\ub3c4:<\/strong> \ud45c\uc900 \uc7a5\uce58\ub294 -10\u00b0C ~ +40\u00b0C\uc758 \uc815\uaca9 \uc791\ub3d9 \uc628\ub3c4\ub97c \uac16\uc2b5\ub2c8\ub2e4. \ud638\uc8fc\uc758 \uace0\uc628 \ud658\uacbd(>45\u00b0C)\uc5d0\uc11c\ub294 \uace0\uc628 \uc724\ud65c\uc720\uc640 15% \uc5f4 \ub514\ub808\uc774\ud305\uc774 \ud544\uc694\ud569\ub2c8\ub2e4.<\/p>\n

    <\/p>\n

    \n \"NMRV<\/p>\n
    \n NMRV\/NRV \uc2dc\ub9ac\uc988 \uc6dc \uae30\uc5b4\ubc15\uc2a4<\/strong><\/p>\n

    \ud504\ub808\uc784 \ud06c\uae30\ub294 025\ubd80\ud130 150\uae4c\uc9c0 \uc81c\uacf5\ub429\ub2c8\ub2e4. \ub2e8\uc77c \ub2e8\uacc4 \uac10\uc18d\ube44\ub294 5:1\uc5d0\uc11c 100:1\uae4c\uc9c0\uc785\ub2c8\ub2e4. \ucd9c\ub825 \ud1a0\ud06c\ub294 \ucd5c\ub300 4,200 N\u00b7m\uc785\ub2c8\ub2e4. \ud558\uc6b0\uc9d5\uc740 \uc54c\ub8e8\ubbf8\ub284 \ub610\ub294 \uc5f0\uc131 \uc8fc\ucca0 \uc7ac\uc9c8\uc785\ub2c8\ub2e4. \ubaa8\ud130 \ud50c\ub79c\uc9c0\ub294 IEC B5\/B14 \uaddc\uaca9\uc744 \uc900\uc218\ud569\ub2c8\ub2e4. IP65 \ub4f1\uae09\uc774 \uae30\ubcf8\uc774\uba70, IP66\/IP67 \ub4f1\uae09\uc740 \uc120\ud0dd \uc0ac\uc591\uc785\ub2c8\ub2e4. \uc724\ud65c\uc740 \ud569\uc131\uc720 \ub610\ub294 \uad11\ubb3c\uc720\ub97c \uc0ac\uc6a9\ud569\ub2c8\ub2e4.<\/p>\n<\/p><\/div>\n<\/div>\n

    <\/p>\n

    \uaddc\uc815 \uc900\uc218 \ubc0f \ud488\uc9c8 \uae30\uc900<\/h2>\n
    \n
    \n \u2713 ISO 9001:2015<\/strong>
    \n \ud488\uc9c8\uacbd\uc601\uc2dc\uc2a4\ud15c \uc778\uc99d\uc744 \ud68d\ub4dd\ud588\uc2b5\ub2c8\ub2e4. \ubaa8\ub4e0 \uc81c\ud488\uc740 \ubb38\uc11c\ud654\ub41c \ud488\uc9c8\uacbd\uc601\uc2dc\uc2a4\ud15c(QMS)\uc5d0 \ub530\ub77c \uc81c\uc870 \ubc0f \uac80\uc0ac\ub418\uba70, \uc644\ubcbd\ud55c \ucd94\uc801\uc131\uc744 \ubcf4\uc7a5\ud569\ub2c8\ub2e4.<\/span>\n <\/div>\n
    \n \u2713 CE \uc778\uc99d<\/strong>
    \n EU \uae30\uacc4\ub958 \uc9c0\uce68\uc5d0 \ub530\ub77c CE \ub9c8\ud06c\ub97c \ud68d\ub4dd\ud588\uc2b5\ub2c8\ub2e4. \ud638\uc8fc \ubc0f \ub274\uc9c8\ub79c\ub4dc \uc5d4\uc9c0\ub2c8\uc5b4\ub9c1 \ud504\ub85c\uc81d\ud2b8\uc5d0\uc11c \ub110\ub9ac \uc0ac\uc6a9\ub418\uace0 \uc788\uc2b5\ub2c8\ub2e4.<\/span>\n <\/div>\n
    \n ✓ IEC 60034 \ubaa8\ud130 \uc778\ud130\ud398\uc774\uc2a4<\/strong><\/strong>
    \n IEC \ud45c\uc900 \ud50c\ub79c\uc9c0 \ubc0f \uc0e4\ud504\ud2b8 \uce58\uc218.<\/strong> \ubaa8\ub4e0 \uc8fc\uc694 \ubaa8\ud130 \ube0c\ub79c\ub4dc\uc640 \uc9c1\uc811 \uc7a5\ucc29\uc774 \uac00\ub2a5\ud569\ub2c8\ub2e4.<\/span>\n <\/div>\n
    \n \u2713 IP65 \/ IP66 \ubcf4\ud638 \ub4f1\uae09<\/strong>
    \n \ubc29\uc9c4 \ubc0f \uace0\uc555 \ubd84\uc0ac \ubc29\uc218 \uae30\ub2a5. \ud638\uc8fc \uc625\uc678 \uc124\uce58 \ud45c\uc900.<\/span>\n <\/div>\n<\/div>\n

    <\/p>\n

    \uc0ac\ub840 \uc5f0\uad6c<\/h2>\n
    \n
    \n 🐄<\/span><\/p>\n
    \n

    Case Study 1 — Cattle Feedlot TMR Mixer, Darling Downs QLD<\/h3>\n
    \n Beef Cattle Feedlot<\/span>
    \n Vertical Auger TMR Mixer Wagon — 14 m³<\/span>\n <\/div>\n

    \uace0\uac1d \ubd88\ud3b8 \uc0ac\ud56d:<\/strong> A 10,000-head cattle feedlot was experiencing worm gearbox failure every 5–6 months on their TMR mixer wagon. Post-failure inspection consistently showed worm wheel wear concentrated on one side of the tooth face — evidence of misalignment between the gearbox and the auger drive shaft.<\/p>\n

    \ud574\uacb0\ucc45:<\/strong> NRV-110 worm gearbox (ratio 40:1, SF=1.75, taper roller bearings) plus a flexible jaw coupling between the gearbox output and auger input shaft to absorb residual misalignment.<\/p>\n

    \uacb0\uacfc:<\/strong> Worm wheel life extended from 5–6 months to over 22 months at first replacement assessment. The feedlot maintenance manager estimated annual saving of $11,000 in gearbox parts and labour.<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n

    \n
    \n 🐑<\/span><\/p>\n
    \n

    Case Study 2 — Sheep Station Supplementary Feeder, Broken Hill NSW<\/h3>\n
    \n Sheep Grazing<\/span>
    \n Horizontal Paddle Feed Mixer — Remote Station<\/span>\n <\/div>\n

    \uace0\uac1d \ubd88\ud3b8 \uc0ac\ud56d:<\/strong> A remote sheep station 180 km from the nearest town was experiencing feed mixer gearbox oil contamination — fine red dust from the arid environment was ingressing through shaft seals, mixing with the mineral oil and causing abrasive wear on the worm shaft thread.<\/p>\n

    \ud574\uacb0\ucc45:<\/strong> NMRV-090 worm gearbox with IP65 housing, double-lip FKM shaft seals, and synthetic PAO lubricant (5,000-hour change interval) was installed.<\/p>\n

    \uacb0\uacfc:<\/strong> No dust contamination events in 30 months of operation and three seasonal inspections. The station owner confirmed the gearbox required only a single oil level check per season.<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n

    \n
    \n 🥛<\/span><\/p>\n
    \n

    Case Study 3 — Dairy Farm Feed Mixer, Gippsland VIC<\/h3>\n
    \n Dairy Farming<\/span>
    \n Reel Mixer Wagon — Mixed Dairy TMR<\/span>\n <\/div>\n

    \uace0\uac1d \ubd88\ud3b8 \uc0ac\ud56d:<\/strong> A Gippsland dairy farm’s reel mixer wagon gearbox was experiencing seal failures during winter — cold-start condensation and wet silage splash were forming an oil-water emulsion that accelerated bearing and worm surface corrosion.<\/p>\n

    \ud574\uacb0\ucc45:<\/strong> NRV series worm gearbox (ratio 30:1, cast iron, double-lip FKM seals, synthetic ISO VG 320, IP65, corrosion-inhibited housing coating) replaced the standard-specification unit.<\/p>\n

    \uacb0\uacfc:<\/strong> Oil emulsification eliminated over the first full winter post-installation. Bearing inspection at 12 months showed no corrosion pitting.<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n

    <\/p>\n

    \n \"\uc6dc<\/p>\n

    NMRV\/NRV \uc2dc\ub9ac\uc988 \uc6dc \uae30\uc5b4\ubc15\uc2a4 - \ud504\ub808\uc784 \ud06c\uae30 025~150, ISO 9001:2015 \uaddc\uaca9\uc5d0 \ub530\ub77c \uc81c\uc870<\/p>\n<\/div>\n

    <\/p>\n

    \uc65c \uc800\ud76c\ub97c \uc120\ud0dd\ud574\uc57c \ud560\uae4c\uc694?<\/h2>\n
    \n
    \n
    🏭<\/div>\n

    20\ub144 \uc774\uc0c1\uc758 \uc81c\uc870 \uacbd\ub825<\/strong>
    \n 2003\ub144\ubd80\ud130 ISO \uc778\uc99d\uc744 \ubc1b\uc740 \uc0dd\uc0b0 \uc2dc\uc124\uc744 \ubcf4\uc720\ud558\uace0 \uc788\uc73c\uba70, \uc6dc \uae30\uc5b4\ubc15\uc2a4\ub97c 60\uac1c\uad6d \uc774\uc0c1\uc5d0 \uc218\ucd9c\ud558\uace0 \uc788\uc2b5\ub2c8\ub2e4.<\/span>\n <\/div>\n

    \n
    📞<\/div>\n

    \uc6d0\uaca9 \uae30\uc220 \uc9c0\uc6d0<\/strong>
    \n \ud638\uc8fc \uc2dc\uac04\ub300\ub97c \ucd08\uc6d4\ud55c \ud654\uc0c1 \ud1b5\ud654 \uc9c4\ub2e8. \ud604\uc7a5 \ubc29\ubb38 \uc5c6\uc774 \uc2e0\uc18d\ud55c \ub300\uc751.<\/span>\n <\/div>\n

    \n
    ⚙️<\/div>\n

    OEM\/ODM \ub9de\ucda4 \uc81c\uc791<\/strong>
    \n \ube44\ud45c\uc900 \uc0e4\ud504\ud2b8, \uc911\uacf5 \ub0b4\uacbd, \ub9de\ucda4\ud615 \ud50c\ub79c\uc9c0 \ubc0f \ube44\uc728. \uc804\uccb4 \ub3c4\uba74 \uac80\ud1a0 \uac00\ub2a5.<\/span>\n <\/div>\n

    \n
    💰<\/div>\n

    \uacf5\uc7a5 \uc9c1\ud310 \uac00\uaca9<\/strong>
    \n \uc720\ud1b5 \ub9c8\uc9c4 \uc5c6\uc74c. \ud22c\uba85\ud55c \ub300\ub7c9 \uad6c\ub9e4 \uac00\uaca9\uc73c\ub85c \ubc18\ubcf5 \uc8fc\ubb38 \uc2dc \uc0c1\ub2f9\ud55c \ud560\uc778 \ud61c\ud0dd \uc81c\uacf5<\/span>\n <\/div>\n

    \n
    📦<\/div>\n

    \uc7ac\uace0 \ubcf4\uc720 \ubc0f \ube60\ub978 \ubc30\uc1a1<\/strong>
    \n \ud45c\uc900 NMRV\/NRV \ud504\ub808\uc784\uc740 \ucc3d\uace0 \uc7ac\uace0\ub85c \ubcf4\uc720\ud558\uace0 \uc788\uc2b5\ub2c8\ub2e4. \uae34\uae09 \uc8fc\ubb38\uc740 \ud2b9\uae09 \ubc30\uc1a1\uc73c\ub85c \ucc98\ub9ac\ub429\ub2c8\ub2e4.<\/span>\n <\/div>\n<\/div>\n

    <\/p>\n

    \uc790\uc8fc \ubb3b\ub294 \uc9c8\ubb38<\/h2>\n
    \n▼ What service factor should I use when selecting a worm gearbox for a feed mixer?<\/summary>\n
    Standard feed mixer service: SF=1.5. For mixers handling frozen silage or compacted dense feeds in winter: SF=2.0. For mineral supplement dosing drives with uniform steady load: SF=1.0–1.25. Apply the service factor to the calculated running torque to get the selection torque, then choose a frame with a rated output torque equal to or exceeding the selection torque.<\/div>\n<\/details>\n
    \n▼ What type of coupling should I use between the worm gearbox and the feed mixer auger shaft?<\/summary>\n
    For vertical auger TMR mixers, a rigid flange coupling or directly bolted hollow bore connection is common, but only if shaft alignment can be maintained within 0.1 mm TIR. Where alignment is difficult to control, a flexible jaw or disc coupling is strongly recommended to absorb angular and parallel misalignment and prevent side-loading the gearbox output bearing.<\/div>\n<\/details>\n
    \n▼ How long should a worm gearbox last on a feed mixer, and what are early warning signs of failure?<\/summary>\n
    A correctly selected and maintained worm gearbox on a feed mixer should achieve 5,000–10,000 operating hours before worm wheel replacement is required. Early warning signs: (1) oil temperature rising above normal during operation, (2) unusual noise change (whine or rumble), (3) oil discolouration to grey or milky.<\/div>\n<\/details>\n
    \n▼ Can I use a single-phase motor with a worm gearbox for a small on-farm feed mixer?<\/summary>\n
    Yes — worm gearboxes are motor-agnostic and can be paired with single-phase motors, common on Australian farms without three-phase power supply. Single-phase capacitor-start motors provide high starting torque suitable for the cold-start demands of feed mixers. For mixers above approximately 5 kW, three-phase or generator-fed supply is strongly recommended for adequate starting current.<\/div>\n<\/details>\n
    \n▼ What is the correct oil viscosity for a feed mixer worm gearbox in Australian conditions?<\/summary>\n
    Mineral oil: ISO VG 220 for ambient temperatures 10–35°C; ISO VG 320 for summer ambient above 35°C. Synthetic PAO: ISO VG 320 covers the full Australian temperature range in a single grade, which simplifies stock management and extends change intervals to 5,000 hours. Avoid gear oils with active sulphur EP additives — these attack the phosphor bronze worm wheel at operating temperatures above 70°C.<\/div>\n<\/details>\n

    <\/p>\n

    \n

    Get Feed Mixer Gearbox Selection Advice<\/h2>\n

    \uc800\ud76c \uc5d4\uc9c0\ub2c8\uc5b4\ub4e4\uc740 \uadc0\uc0ac\uc758 \uc6a9\ub3c4\uc5d0 \ub9de\ub294 \ucd5c\uc801\uc758 \uc6dc \uae30\uc5b4\ubc15\uc2a4 \ubaa8\ub378, \uae30\uc5b4\ube44, \ucd95 \uad6c\uc131 \ubc0f \uc7a5\ucc29 \ubc29\uc2dd\uc744 \ucd94\ucc9c\ud574 \ub4dc\ub9b4 \uc900\ube44\uac00 \ub418\uc5b4 \uc788\uc2b5\ub2c8\ub2e4.<\/p>\n

    \n \ubb34\ub8cc \uacac\uc801\uc744 \uc694\uccad\ud558\uc138\uc694<\/a>
    \n     \ubaa8\ub4e0 \uc81c\ud488 \ubcf4\uae30<\/a>\n <\/div>\n

    \ub354 \uc790\uc138\ud55c \ub0b4\uc6a9\uc744 \uc0b4\ud3b4\ubcf4\uc138\uc694 \uc9c0\uc6d0\uc11c \ud398\uc774\uc9c0<\/a> \ub610\ub294 \uc800\ud76c\uc5d0 \ub300\ud574 \ub354 \uc54c\uc544\ubcf4\uc138\uc694 \ud68c\uc0ac \uc18c\uac1c \ud398\uc774\uc9c0<\/a>.<\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

    Worm Gear Reducer for Feed Mixers Feed mixers — vertical auger mixers, horizontal paddle mixers, and reel-type total mixed ration (TMR) wagons — are the central processing equipment in Australian cattle feedlots, sheep stations, and dairy farms. They must mix dry fodder, silage, concentrates, and minerals into a homogeneous ration under varying load conditions, often […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[2321],"tags":[2487,2484,2486,2485,911],"class_list":["post-865","post","type-post","status-publish","format-standard","hentry","category-agriculture","tag-auger-mixer","tag-feed-mixer-drive","tag-livestock-feed","tag-tmr-mixer-gearbox","tag-worm-reducer"],"_links":{"self":[{"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/posts\/865","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/comments?post=865"}],"version-history":[{"count":1,"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/posts\/865\/revisions"}],"predecessor-version":[{"id":951,"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/posts\/865\/revisions\/951"}],"wp:attachment":[{"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/media?parent=865"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/categories?post=865"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nmrv063gearbox.com\/ko\/wp-json\/wp\/v2\/tags?post=865"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}