Описание продукта
NMRV 571-150 worm gear box with flange and electric motor
NMRV+NMRV Double Stage Arrangement Reduction Gear Box
RV Series Worm Gearbox
червячный редуктор
nmrv worm gear motor
RV Series
Including RV / NMRV / NRV.
Main Characteristic of RV Series Worm Gearbox
RV series worm gear reducer is a new-generation product developed by CHINAMFG on the basis of perfecting WJ series products with a compromise of advanced technology both at home and abroad.
1. High-quality aluminum alloy, light in weight and non-rusting.
2. Large in output torque.
3. Smooth running and low noise,durable in dreadful conditions.
4. High radiation efficiency.
5. Good-looking appearance, durable in service life and small volume.
6. Подходит для установки на всенаправленных подшипниках.
Main Materials of RV Series Worm Gearbox
1. Housing: die-cast aluminum alloy(frame size: 571 to 090), cast iron(frame size: 110 to 150).
2. Worm: 20Crm, carbonization quencher heat treatment makes the surface hardness of worm gears up to 56-62 HRX, retain carbonization layer’s thickness between 0.3 and 0.5mm after precise grinding.
3. Worm Wheel: wearable stannum bronze alloy.
| SPEED RATIO | 7.5~100 |
| OUTPUT TORQUE | <1050NM |
| IN POWER | 0.09-11KW |
| MOUNTING TYPE | FOOT-MOUNTED FLANGE-MOUNTED |
| When working, great load capacity, stable running, low noise with high efficiency. | |||||||
| Gear Box’s Usage Field | |||||||
| 1 | Metallurgy | 11 | Agitator | ||||
| 2 | Mine | 12 | Rotary weeder | ||||
| 3 | Machine | 13 | Metallurgy | ||||
| 4 | Energy | 14 | Compressor | ||||
| 5 | Transmission | 15 | Petroleum industry | ||||
| 6 | Water Conserbancy | 16 | Air Compressor | ||||
| 7 | Tomacco | 17 | Crusher | ||||
| 8 | Medical | 18 | Materials | ||||
| 9 | Упаковка | 19 | Electronics | ||||
| 10 | Chemical industry | 20 | Textile indutry | ||||
| … | … | ||||||
| Власть | 0.06kw | 0.09kw | 0.12kw | 0.18kw | 0.25kw | 0.37kw | 0.55kw |
| 0.75kw | 1.1kw | 1.5kw | 2.2kw | 3kw | 4kw | 5.5kw | |
| 7.5kw | 11kw | 15kw | |||||
| Torque | 2.6N.m-3000N.m | ||||||
| Соотношение | 7.5-100, the double gearbox is more | ||||||
| Цвет | Blue, Silver or as customers’ need | ||||||
| Материал | Iron or Aluminium | ||||||
| Упаковка | Carton with Plywood Case or as clients’ requirement | ||||||
| Type | RV571 | RV030 | RV040 | RV050 | RV063 | RV075 | RV090 |
| Масса | 0.7kg | 1.3kg | 2.3kg | 3.5kg | 6.2kg | 9kg | 13kg |
| Type | RV110 | RV130 | RV150 | ||||
| Масса | 35kg | 60kg | 84kg | ||||
| Mounting Methods | Foot Installation | Flange Installation | |||||
| For various mortor or double input/output shafts can be equipped | |||||||
Product picture:
Structure:
Сертификат:
Packing & Delivery:
Our company :
AOKMAN was founded in 1982, which has more than 36 years in R & D and manufacturing of gearboxes, gears, shaft, motor and spare parts.
We can offer the proper solution for uncountable applications. Our products are widely used in the ranges of metallurgical, steel, mining, pulp and paper, sugar and alcohol market and various other types of machines with a strong presence in the international market.
AOKMAN has become a reliable supplier, able to supply high quality gearboxes.With 36 years experience, we assure you the utmost reliability and security for both product and services.
Customer visiting:
ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
Contact:
Welcome you contace me if you are interested in our product.
Our team will support any need you might have. /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Приложение: | Motor, Industry |
|---|---|
| Функция: | Speed Changing, Speed Reduction |
| Макет: | Orthogonal |
| Твердость: | Hardened |
| Установка: | Горизонтальный тип |
| Шаг: | Одношаговый |
| Настройка: | Доступный | Индивидуальный запрос |
|---|
Устранение ненормальных шумов в редукторе NMRV
Ненормальные шумы, исходящие от редуктора NMRV, могут быть неприятными и указывать на скрытые проблемы. Для устранения неисправности выполните следующие действия:
- Определите источник шума: Внимательно прислушайтесь к шуму и определите, это скрежет, визг или стук.
- Проверьте смазку: Недостаточная или загрязненная смазка может привести к появлению шума. Убедитесь, что редуктор должным образом смазан.
- Осмотрите шестерни: Осмотрите зубья шестерни на предмет износа, повреждений или смещения.
- Ищите посторонние предметы: Посторонние предметы внутри коробки передач могут вызывать шум. Очистите и осмотрите внутреннюю часть.
- Проверьте подшипники: Изношенные или поврежденные подшипники могут издавать шум. Осмотрите их и замените при необходимости.
- Проверьте уплотнители: Поврежденные уплотнения могут пропускать загрязнения, что влияет на работоспособность. Замените поврежденные уплотнения.
- Изучите рынок жилья: Убедитесь, что корпус редуктора цел, без трещин и перекосов.
- Проверьте условия загрузки: Чрезмерные нагрузки могут привести к шуму. Убедитесь, что редуктор не перегружен.
- Проверьте место крепления: Убедитесь, что коробка передач правильно установлена и выровнена.
- Ознакомьтесь с рекомендациями: Для получения конкретных инструкций по устранению неполадок обратитесь к рекомендациям производителя.
- Профессиональная помощь: Если проблема не исчезнет, обратитесь за помощью к профессиональному специалисту или производителю.
Выполните следующие действия, чтобы выявить и устранить ненормальные шумы в редукторе NMRV.
Design Principles of an NMRV Gearbox
The design of an NMRV (worm gear) gearbox is based on key principles that enable its efficient and reliable operation:
- Worm Gear Mechanism: The core of an NMRV gearbox is the worm screw and worm wheel. The worm screw, typically cylindrical in shape, meshes with the teeth of the worm wheel. This configuration provides high gear reduction ratios.
- Helical Gearing: The worm screw is usually helical, allowing for smoother engagement with the worm wheel. Helical gearing reduces the sliding friction and noise associated with traditional straight-cut worm gears.
- Компактный дизайн: NMRV gearboxes are designed to be compact, often with a right-angle configuration. This allows for efficient use of space in various applications.
- Alloy Construction: Many NMRV gearboxes are constructed from high-quality alloys, providing durability and corrosion resistance. The choice of materials ensures a gearbox capable of withstanding varying loads and environmental conditions.
- Bearing Support: Bearings support the rotating elements within the gearbox, reducing friction and ensuring smooth operation. Bearings are strategically placed to handle radial and axial loads.
- Sealing and Lubrication: NMRV gearboxes are equipped with effective sealing mechanisms to prevent the entry of contaminants and to retain lubricating oil. Proper lubrication is essential for reducing wear and enhancing gearbox efficiency.
- Efficient Power Transmission: The worm gear mechanism in NMRV gearboxes provides high gear reduction ratios, allowing for efficient power transmission while minimizing energy losses.
- Quiet Operation: The helical design of the worm screw and worm wheel contributes to quieter operation compared to traditional straight-cut worm gears.
- Широкий диапазон соотношений: NMRV gearboxes are available in various gear ratios, allowing users to select the appropriate configuration for their specific application needs.
The combination of these design principles results in an NMRV gearbox that offers efficient, reliable, and quiet power transmission for a wide range of industrial applications.
Working Principle of an NMRV Gearbox
An NMRV gearbox, also known as a worm gear reducer, operates based on a worm and worm wheel mechanism. Here’s how it works:
The gearbox consists of two main components: the worm (a screw-like shaft) and the worm wheel (a toothed wheel). The worm is driven by the input power source, while the worm wheel is connected to the output shaft.
As the worm rotates, its threaded shaft engages with the teeth of the worm wheel. The helical shape of the worm causes the teeth of the worm wheel to push against each other, resulting in a smooth and gradual transfer of motion. This mechanism provides the speed reduction and torque multiplication required for various applications.
One key characteristic of NMRV gearboxes is that the worm can turn the worm wheel, but the reverse is not possible due to the high friction generated by the helical threads. This feature prevents the output shaft from back-driving the input shaft, providing mechanical locking and enhancing safety and stability in applications.
The NMRV gearbox’s operation is continuous, and its simple design contributes to its reliability and efficiency. It is important to ensure proper lubrication to minimize wear and heat generation during operation.
editor by CX 2024-01-31