Ürün Açıklaması
High Rpm RV series Aluminum Alloy Worm Gear box NMRV 571-150 Reducer Variable Wheel Drive Speed Reduction Worm Gearbox
Ürün Parametreleri
Specification
| Tip | Worm Gearbox/Worm Gear Speed Reducer |
| Model | NMRV:571,030,040,050,063,075,090,110,130,150 |
| Center distance | 25-150mm |
| Oran | 5,7.5,10,15,20,25,30,40,50,60,80,100 |
| Torque | 1.8-1800Nm |
| Motor | 2 pole, 4 pole, 6 pole |
| Mounting position | Omnidirectional |
| Color | Blue/Silver grey Or On request |
| Material | NMRV571~090:Aluminum alloy; NMRV110~150 Cast iron |
Details
Multiple inputs and outputs
Özellik
1. Mad of high-quality aluminum alloy,light weight and non-rusting
2. Large output torque
3. Smooth in running and low in noise,can work long time in dreadful conditions.
4. High in radiating efficiency.
5. Good-looking in appearance,durable in service life and small in volume.
6. Suitable for omnibearing installation.
contact-info.html
| Model | NMRV571, NMRV030, NMRV040, NMRV050, NMRV063, NMRV075, NMRV090, NMRV110, NMRV130, NMRV150 |
| Oran | 5,7.5,10,15,20,25,30,40,50,60,80,100 |
| Çıkış Torku | 1.8-1760Nm |
| Application | Machinery Industry |
| Input Speed | 900-2800RPM |
| Output Speed | 10-250RPM |
| Material | Housing: Size 25-110 Is Aluminum Alloy, Size 110-150 Is Cast-Iron |
| Worm Wheel: ZCuSn10Pb1 | |
| Worm:20Cr | |
| Pinion:Tin Bronze | |
| Output Shaft: Steel-45# | |
| IEC Flange | IEC Standard Flange Or On Customer Request |
Detailed Photos
| Sertlik: | Sertleştirilmiş Diş Yüzeyi |
|---|---|
| Kurulum: | 90 Degree |
| Düzen: | Expansion |
| Dişli Şekli: | Konik Dişli |
| Adım: | Tek Adımlı |
| Type: | Gear Reducer |
| Örnekler: | US$ 30/Piece 1 Adet (Minimum Sipariş) | |
|---|
Advantages of Using Worm Gear in an NMRV Gearbox
Worm gears offer several advantages when used in an NMRV gearbox:
1. High Reduction Ratio: Worm gears provide a high reduction ratio in a compact form, allowing for significant speed reduction in a single stage.
2. High Efficiency: While worm gears typically have lower mechanical efficiency compared to some other gear types, the design of the NMRV gearbox optimizes efficiency by using a bronze worm gear and a self-locking mechanism that minimizes backdriving.
3. Compact Design: Worm gears have a compact and space-efficient design, making them suitable for applications with limited installation space.
4. Smooth and Quiet Operation: The meshing of worm gears and the helical design of the worm result in relatively smooth and quiet operation.
5. Self-Locking: Worm gears inherently have a self-locking characteristic, meaning that the gear cannot easily be back-driven by the worm. This property is beneficial for applications where holding position without external locking mechanisms is essential.
6. High Torque Capacity: Worm gears can transmit high torque loads, making them suitable for applications that require high torque output.
7. Simple Lubrication: The design of the NMRV gearbox allows for efficient lubrication of the worm gear, ensuring optimal performance and longevity.
These advantages make worm gears a popular choice for NMRV gearboxes in various industrial applications, where their characteristics contribute to reliable and efficient power transmission.
Maintenance and Service of an NMRV Gearbox
Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:
- Yağlama: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
- Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
- Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
- Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
- Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
- Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
- Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
- Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
- Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.
By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.
NMRV Şanzımanının Montajı
NMRV şanzımanının montajı, doğru hizalama ve güvenli bağlantı sağlamak için dikkatli bir şekilde yapılmalıdır. İşte montaj süreci için genel bir kılavuz:
- Çalışma alanını hazırlayın: Çalışma alanınızın temiz ve düzenli olduğundan ve gerekli alet ve ekipmanlara sahip olduğunuzdan emin olun.
- Konumlandırma: NMRV şanzımanını, giriş ve çıkış bileşenleriyle hizalandığından emin olarak, makineniz üzerindeki istediğiniz konuma yerleştirin.
- Hizalama: Şanzımanın giriş milinin, güç kaynağından gelen tahrik miliyle hizalı olduğundan emin olun. Hizalama hatası, erken aşınmaya ve verimliliğin azalmasına yol açabilir.
- Montaj: NMRV şanzımanını uygun bağlantı elemanlarını kullanarak makine çerçevesine güvenli bir şekilde monte edin. Tork değerleri için üreticinin önerilerine uyun.
- Giriş Bağlantısı: Şanzımanın giriş milini, uygun bir kaplin kullanarak tahrik miline bağlayın. Şanzıman bileşenlerinde gereksiz gerilimi önlemek için bu kaplinin doğru şekilde hizalanması gerekir.
- Çıkış Bağlantısı: Benzer şekilde, şanzımanın çıkış milini uygun bir kaplin kullanarak tahrik edilen bileşene bağlayın.
- Yağlama: Çalıştırmadan önce, dişlilerin düzgün bir şekilde birbirine geçmesini sağlamak ve sürtünmeyi azaltmak için şanzımanı önerilen yağlayıcı ile doldurduğunuzdan emin olun.
- Test: Olağandışı sesler, titreşimler veya sızıntılar olup olmadığını kontrol etmek için makineyi kısa süreliğine çalıştırın. Gerekli ayarlamaları yapın.
Sorunsuz ve zahmetsiz bir kurulum süreci için üreticinin kurulum yönergelerine ve özelliklerine uymak çok önemlidir. Doğru kurulum, NMRV şanzımanınızın uzun ömürlü olmasına ve güvenilir performans göstermesine katkıda bulunur.
editor by CX 2023-10-17