Ürün Açıklaması
Characteristics:
(1)Large output torque
(2) Safe, reliable, economical and durable
(3) Stable transmission, quiet operation
(4) High heat-radiating efficiency, high carrying ability
(5) Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio
(6) Mechanical gearboxes are widely used in the sectors,like foodstuff, ceramics, and chemical manufacturing, as well as packing, printing, dyeing and plastics
Technical data:
(1) Motor input power:0.06kw-15kw
(2) Output torque:4-2320N.M
(3) Speed ratio of worm gear peed reducer: 5/10/15/20/25/30/40/50/60/80/100
(4) With IEC motor input flange: 56B14/71B14/80B5/90B5…
Materials:
(1) NMRV571-NMRV090: Aluminium alloy housing
(2) NMRV110-150: Cast iron housing
(3) Bearing: CHINAMFG bearing & Homemade bearing
(4) Lubricant: Synthetic & Mineral
(5) The material of the worm mandrel is HT250, and the worm ring gear is ZQSn10-1.
(6) With high quality homemade bearings, assembled CHINAMFG oil seals & filled with high quality lubricant.
Operation&mantenance
(1)When worm speed reducer starts to work up to200-400 hours, its lubricant should be replaced.
(2)The gearbox need to replace the oil after 4000 hours.
(3)Worm reduction gearbox is fully filled with lubricant oil after finshed assembly.
(4)Lubricanting oil should be kept enough in the casing and checked at a fixed time.
Color:
(1) Blue / Light blue
(2) Silvery White
Quality control
(1) Quality guarantee: 1 year
(2) Certificate of quality: ISO9001:2000
(3) Every product must be tested before sending
| Motor power | Model | speed ratio | output speed | output toruqe |
| 0.06kw 1400rpm | NMRV030 | 5 | 280rpm | 2.0N.M |
| NMRV030 | 7.5 | 186rpm | 2.6N.M | |
| NMRV030 | 10 | 140rpm | 3.3N.M | |
| NMRV030 | 15 | 94rpm | 4.7N.M | |
| NMRV030 | 20 | 70rpm | 5.9N.M | |
| NMRV030 | 25 | 56rpm | 6.8N.M | |
| NMRV030 | 30 | 47rpm | 7.9N.M | |
| NMRV030 | 40 | 35rpm | 9.7N.M | |
| NMRV030 | 50 | 28rpm | 11.0N.M | |
| NMRV030 | 60 | 24rpm | 12.0N.M | |
| NMRV030 | 80 | 18rpm | 14.0N.M | |
| 0.09kw 1400rpm | NMRV030 | 5 | 280rpm | 2.7N.M |
| NMRV030 | 7.5 | 186rpm | 3.9N.M | |
| NMRV030 | 10 | 140rpm | 5.0N.M | |
| NMRV030 | 15 | 94rpm | 7.0N.M | |
| NMRV030 | 20 | 70rpm | 8.8N.M | |
| NMRV030 | 25 | 56rpm | 10.0N.M | |
| NMRV030 | 30 | 47rpm | 12.0N.M | |
| NMRV030 | 40 | 35rpm | 14.0N.M | |
| NMRV030 | 50 | 28rpm | 17.0N.M | |
| NMRV030 | 60 | 24rpm | 18.0N.M | |
| 0.12kw 1400rpm | NMRV030 | 5 | 280rpm | 3.6N.M |
| NMRV030 | 7.5 | 186rpm | 5.2N.M | |
| NMRV030 | 10 | 140rpm | 6.6N.M | |
| NMRV030 | 15 | 94rpm | 9.3N.M | |
| NMRV030 | 20 | 70rpm | 12.0N.M | |
| NMRV030 | 25 | 56rpm | 14.0N.M | |
| NMRV030 | 30 | 47rpm | 16.0N.M | |
| NMRV030 | 40 | 35rpm | 19.0N.M | |
| NMRV030 | 50 | 28rpm | 22.0N.M | |
| 0.18kw 1400rpm | NMRV030 | 5 | 280rpm | 5.3N.M |
| NMRV030 | 7.5 | 186rpm | 7.7N.M | |
| NMRV030 | 10 | 140rpm | 10.0N.M | |
| NMRV030 | 15 | 94rpm | 14.0N.M | |
| NMRV030 | 20 | 70rpm | 18.0N.M | |
| NMRV030 | 25 | 56rpm | 20.0N.M | |
| NMRV030 | 30 | 47rpm | 24.0N.M |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Başvuru: | Motor, Reducer |
|---|---|
| Sertlik: | Hardened |
| Type: | Worm and Wormwheel |
| Output Speed: | 14-280rpm |
| Input Speed: | 1400rpm |
| Ouput Torque: | 2.6-1195n.M |
| Özelleştirme: | Mevcut | Özelleştirilmiş Talep |
|---|
NMRV Şanzımanındaki Anormal Seslerin Giderilmesi
NMRV şanzımanından gelen anormal sesler can sıkıcı olabilir ve altta yatan sorunlara işaret edebilir. Sorunu gidermek ve çözmek için şu adımları izleyin:
- Gürültüyü Belirleyin: Sesi dikkatlice dinleyin ve öğütme, vızıldama veya vurma sesi olup olmadığını belirleyin.
- Yağlamayı kontrol edin: Yetersiz veya kirlenmiş yağlama gürültüye neden olabilir. Şanzımanın düzgün şekilde yağlandığından emin olun.
- Dişlileri inceleyin: Dişli çarkların dişlerini aşınma, hasar veya hizalama bozukluğu açısından inceleyin.
- Yabancı cisim olup olmadığını kontrol edin: Şanzımanın içindeki yab cisimler gürültüye neden olabilir. İçini temizleyin ve kontrol edin.
- Rulmanları kontrol edin: Aşınmış veya hasar görmüş rulmanlar gürültülü olabilir. Bunları kontrol edin ve gerekirse değiştirin.
- Contaları Kontrol Edin: Hasarlı contalar, kirleticilerin içeri girmesine ve performansı etkilemesine neden olabilir. Hasarlı contaları değiştirin.
- Konutları inceleyin: Şanzıman gövdesinin çatlak veya hizalama bozukluğu olmaksızın sağlam olduğundan emin olun.
- Yük koşullarını gözden geçirin: Aşırı yükler gürültüye neden olabilir. Şanzımanın aşırı yüklenmediğinden emin olun.
- Montajı kontrol edin: Şanzımanın doğru şekilde monte edildiğini ve hizalandığını doğrulayın.
- Yönergeleri inceleyin: Sorun giderme adımları için üreticinin yönergelerine bakın.
- Profesyonel Yardım: Sorun devam ederse, profesyonel bir teknisyenden veya üreticiden yardım alın.
NMRV şanzımanınızdaki anormal sesleri tespit etmek ve gidermek için şu adımları izleyin.
Lubrication for an NMRV Gearbox
Lubrication is essential for the proper functioning and longevity of an NMRV gearbox. The type and amount of lubricant required may vary depending on the gearbox model and manufacturer. Here are the general lubrication practices:
- Recommended Lubricants: Use the lubricants specified by the gearbox manufacturer. Typically, high-quality gear oils with the appropriate viscosity and additives are recommended.
- Initial Fill: Prior to the gearbox’s first operation, ensure that it is properly filled with the recommended lubricant to the correct level. Follow the manufacturer’s guidelines for the proper quantity.
- Lubricant Change: Regularly change the lubricant according to the manufacturer’s recommended intervals. Over time, lubricants can degrade due to heat and contamination, which can affect gearbox performance.
- Temperature Considerations: Gearboxes operating in extreme temperatures may require lubricants with specific temperature ranges to ensure proper viscosity and protection.
- Checking Levels: Periodically check the lubricant level in the gearbox to ensure it is within the specified range. This can prevent damage caused by insufficient lubrication.
- Oil Analysis: Some gearbox systems benefit from regular oil analysis to monitor lubricant condition and identify potential issues before they cause significant damage.
Proper lubrication practices contribute to reduced friction, wear, and heat generation within the NMRV gearbox, leading to improved efficiency and extended lifespan.
NMRV Gearbox Ratios
NMRV gearboxes are available in a variety of gear ratios to suit different applications and torque requirements. The gear ratio determines the relationship between the input and output speeds of the gearbox. Commonly available ratios include:
- 5:1: This ratio provides higher output torque at a slower output speed compared to the input speed.
- 7.5:1: This ratio offers a balance between torque and speed.
- 10:1: With this ratio, the output speed is further reduced while increasing torque output.
- 15:1: This ratio is suitable for applications requiring higher torque output at the expense of speed.
- 20:1: This ratio maximizes torque output while significantly reducing output speed.
- 25:1: It provides even higher torque output at a further reduced output speed.
- 30:1: This ratio is ideal for applications demanding maximum torque at minimum output speed.
- 40:1 and higher: These ratios are used in applications with very high torque requirements and low output speed.
The choice of gearbox ratio depends on the specific application, desired output speed, and required torque. It’s important to select the right ratio to ensure optimal performance and efficiency in your machinery.
editor by CX 2024-04-26