{"id":865,"date":"2026-06-26T03:00:54","date_gmt":"2026-06-26T03:00:54","guid":{"rendered":"https:\/\/nmrv063gearbox.com\/worm-gear-reducer-for-feed-mixers\/"},"modified":"2026-06-26T03:00:55","modified_gmt":"2026-06-26T03:00:55","slug":"worm-gear-reducer-for-feed-mixers","status":"publish","type":"post","link":"https:\/\/nmrv063gearbox.com\/vi\/worm-gear-reducer-for-feed-mixers\/","title":{"rendered":"B\u1ed9 gi\u1ea3m t\u1ed1c b\u00e1nh r\u0103ng tr\u1ee5c v\u00edt cho m\u00e1y tr\u1ed9n th\u1ee9c \u0103n ch\u0103n nu\u00f4i"},"content":{"rendered":"
\n

<\/p>\n

B\u1ed9 gi\u1ea3m t\u1ed1c b\u00e1nh r\u0103ng tr\u1ee5c v\u00edt cho m\u00e1y tr\u1ed9n th\u1ee9c \u0103n ch\u0103n nu\u00f4i<\/h2>\n

\"B\u1ed9<\/p>\n

Feed mixers — vertical auger mixers, horizontal paddle mixers, and reel-type total mixed ration (TMR) wagons — are the central processing equipment in Australian cattle feedlots, sheep stations, and dairy farms. They must mix dry fodder, silage, concentrates, and minerals into a homogeneous ration under varying load conditions, often operating for multiple hours per day. The b\u1ed9 gi\u1ea3m t\u1ed1c b\u00e1nh r\u0103ng tr\u1ee5c v\u00edt<\/strong> provides the low-speed, high-torque drive required by mixing augers and paddles from a standard motor, in a compact sealed unit that requires minimal maintenance and can be serviced on-farm.<\/p>\n

Australian livestock properties — particularly remote cattle stations in Queensland and the Northern Territory — often operate feed mixer equipment for months between access to qualified mechanical technicians. The worm reducer’s low-maintenance design — oil-bath lubrication, sealed housing, no chains or belts to adjust — is a significant operational advantage in these remote settings. A single annual oil change and seal inspection is the complete maintenance requirement for most installations.<\/p>\n

The self-locking property of worm gearboxes also benefits feed mixer applications: when the drive is stopped between mixing batches, the auger or paddle remains stationary without a brake, preventing the load from slowly rotating under gravity and spilling partial batches during loading or discharge operations.<\/p>\n

<\/p>\n

\u1ee8ng d\u1ee5ng v\u00e0 tr\u01b0\u1eddng h\u1ee3p s\u1eed d\u1ee5ng trong ng\u00e0nh<\/h2>\n

Worm reducers are found throughout feed processing and mixing systems on Australian livestock properties:<\/p>\n

    \n
  • Vertical auger TMR mixer drive<\/strong> — single or twin auger drive at 20–60 RPM, high starting torque against dense silage<\/li>\n
  • Horizontal paddle mixer drive<\/strong> — slow rotary paddle action for gentle mixing of feed components<\/li>\n
  • Reel mixer wagon drive<\/strong> — controlled rotation of the mixing reel and discharge conveyor<\/li>\n
  • Feed auger hopper discharge drive<\/strong> — controlled volumetric discharge from feed storage hopper<\/li>\n
  • Mineral and molasses dosing drive<\/strong> — precise low-speed metering of liquid and solid supplements<\/li>\n<\/ul>\n

    Material specification for feed mixer service:<\/strong> Worm shaft in carbon steel with precision-ground helical thread and surface hardening. Worm wheel in cast phosphor bronze — the low friction coefficient is particularly important in feed mixer service where the gearbox may run 4–8 hours per day. Housing in cast iron with heat-dissipation fin casting. IP54 sealing as minimum; IP65 for outdoor feedlot environments exposed to dust storms and rain.<\/p>\n

    Starting torque requirements:<\/strong> Feed mixers have exceptionally high starting torque requirements — frozen or compacted silage can require 3–5× the running torque to break initial static friction. A service factor of SF=1.5 is recommended for standard feed mixer service, increasing to SF=2.0 for mixers handling frozen feed in winter months.<\/p>\n

    <\/p>\n

    \n \"Worm\n<\/div>\n

    <\/p>\n

    Th\u00f4ng s\u1ed1 k\u1ef9 thu\u1eadt v\u00e0 h\u01b0\u1edbng d\u1eabn l\u1ef1a ch\u1ecdn<\/h2>\n

    S\u1eed d\u1ee5ng b\u1ea3ng b\u00ean d\u01b0\u1edbi \u0111\u1ec3 x\u00e1c \u0111\u1ecbnh ki\u1ec3u m\u00e1y ph\u00f9 h\u1ee3p. C\u00e1c th\u00f4ng s\u1ed1 ch\u00ednh bao g\u1ed3m t\u1ef7 s\u1ed1 truy\u1ec1n gi\u1ea3m, m\u00f4-men xo\u1eafn \u0111\u1ea7u ra, k\u00edch th\u01b0\u1edbc tr\u1ee5c v\u00e0 v\u1eadt li\u1ec7u v\u1ecf. Lu\u00f4n lu\u00f4n \u00e1p d\u1ee5ng \u0111\u00fang ph\u01b0\u01a1ng ph\u00e1p. H\u1ec7 s\u1ed1 d\u1ecbch v\u1ee5 (SF)<\/strong> cho chu k\u1ef3 l\u00e0m vi\u1ec7c c\u1ee7a b\u1ea1n.<\/p>\n

    \n\n\n\n\n\n\n\n\n\n\n\n
    Tham s\u1ed1<\/th>\nPh\u1ea1m vi\/Gi\u00e1 tr\u1ecb \u0111i\u1ec3n h\u00ecnh<\/th>\nGhi ch\u00fa l\u1ef1a ch\u1ecdn<\/th>\n<\/tr>\n<\/thead>\n
    T\u1ef7 l\u1ec7<\/td>\n20:1 – 60:1 typical for mixers<\/td>\nProvides 25–70 RPM output from standard 4-pole motor<\/td>\n<\/tr>\n
    M\u00f4-men xo\u1eafn \u0111\u1ea7u ra<\/td>\n200 – 3,000 N·m<\/td>\nApply SF 1.5; increase to 2.0 for cold-start frozen silage duty<\/td>\n<\/tr>\n
    Tr\u1ee5c \u0111\u1ea7u v\u00e0o<\/td>\nIEC B5\/B14 flange, IEC 60034<\/strong><\/td>\nDirect-mount to farm-standard single or three-phase motors<\/td>\n<\/tr>\n
    Tr\u1ee5c \u0111\u1ea7u ra<\/td>\nSolid keyed or hollow bore<\/td>\nHollow bore for direct auger shaft pass-through<\/td>\n<\/tr>\n
    V\u1eadt li\u1ec7u x\u00e2y nh\u00e0<\/td>\nCast Iron with fin casting<\/td>\nEssential for continuous 4+ hour mixer duty thermal management<\/td>\n<\/tr>\n
    Ph\u1edbt tr\u1ee5c<\/td>\nDouble-lip NBR; FKM for wet\/chemical feed<\/td>\nUpgrade to FKM for mixers handling liquid supplements or acids<\/td>\n<\/tr>\n
    L\u1edbp b\u1ea3o v\u1ec7<\/td>\nIP54 indoor; IP65 outdoor feedlot<\/td>\nIP65 for dusty Australian feedlot environments<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

    ► H\u1ec7 s\u1ed1 d\u1ecbch v\u1ee5 (SF):<\/strong> T\u1ea3i tr\u1ecdng \u0111\u1ed3ng \u0111\u1ec1u SF=1.0 | Va \u0111\u1eadp v\u1eeba ph\u1ea3i SF=1.25\u20131.5 | Va \u0111\u1eadp m\u1ea1nh \/ li\u00ean t\u1ee5c 24 gi\u1edd SF=1.75\u20132.0<\/p>\n

    ► Nhi\u1ec7t \u0111\u1ed9 m\u00f4i tr\u01b0\u1eddng xung quanh:<\/strong> C\u00e1c thi\u1ebft b\u1ecb ti\u00eau chu\u1ea9n c\u00f3 c\u00f4ng su\u1ea5t \u0111\u1ecbnh m\u1ee9c t\u1eeb -10\u00b0C \u0111\u1ebfn +40\u00b0C. C\u00e1c \u0111\u1ecba \u0111i\u1ec3m c\u00f3 nhi\u1ec7t \u0111\u1ed9 m\u00f4i tr\u01b0\u1eddng cao \u1edf \u00dac (>45\u00b0C) y\u00eau c\u1ea7u ch\u1ea5t b\u00f4i tr\u01a1n ch\u1ecbu nhi\u1ec7t \u0111\u1ed9 cao v\u00e0 gi\u1ea3m c\u00f4ng su\u1ea5t do nhi\u1ec7t \u0111\u1ed9 theo ti\u00eau chu\u1ea9n 15%.<\/p>\n

    <\/p>\n

    \n \"H\u1ed9p<\/p>\n
    \n H\u1ed9p s\u1ed1 b\u00e1nh r\u0103ng tr\u1ee5c v\u00edt d\u00f2ng NMRV \/ NRV<\/strong><\/p>\n

    C\u00f3 s\u1eb5n c\u00e1c k\u00edch th\u01b0\u1edbc khung t\u1eeb 025 \u0111\u1ebfn 150. T\u1ef7 s\u1ed1 gi\u1ea3m t\u1ed1c m\u1ed9t c\u1ea5p t\u1eeb 5:1 \u0111\u1ebfn 100:1. M\u00f4-men xo\u1eafn \u0111\u1ea7u ra l\u00ean \u0111\u1ebfn 4.200 N\u00b7m. V\u1ecf b\u1eb1ng nh\u00f4m ho\u1eb7c gang d\u1ebbo. M\u1eb7t b\u00edch \u0111\u1ed9ng c\u01a1 IEC B5\/B14. Ti\u00eau chu\u1ea9n IP65, IP66\/IP67 t\u00f9y ch\u1ecdn. B\u00f4i tr\u01a1n b\u1eb1ng d\u1ea7u t\u1ed5ng h\u1ee3p ho\u1eb7c d\u1ea7u kho\u00e1ng.<\/p>\n<\/p><\/div>\n<\/div>\n

    <\/p>\n

    Ti\u00eau chu\u1ea9n tu\u00e2n th\u1ee7 v\u00e0 ch\u1ea5t l\u01b0\u1ee3ng<\/h2>\n
    \n
    \n \u2713 ISO 9001:2015<\/strong>
    \n H\u1ec7 th\u1ed1ng qu\u1ea3n l\u00fd ch\u1ea5t l\u01b0\u1ee3ng \u0111\u01b0\u1ee3c ch\u1ee9ng nh\u1eadn. M\u1ed7i s\u1ea3n ph\u1ea9m \u0111\u01b0\u1ee3c s\u1ea3n xu\u1ea5t v\u00e0 ki\u1ec3m tra theo h\u1ec7 th\u1ed1ng qu\u1ea3n l\u00fd ch\u1ea5t l\u01b0\u1ee3ng (QMS) \u0111\u01b0\u1ee3c l\u1eadp th\u00e0nh v\u0103n b\u1ea3n v\u1edbi \u0111\u1ea7y \u0111\u1ee7 th\u00f4ng tin truy xu\u1ea5t ngu\u1ed3n g\u1ed1c.<\/span>\n <\/div>\n
    \n \u2713 Ch\u1ee9ng nh\u1eadn CE<\/strong>
    \n \u0110\u1ea1t ch\u1ee9ng nh\u1eadn CE theo Ch\u1ec9 th\u1ecb v\u1ec1 m\u00e1y m\u00f3c c\u1ee7a EU. \u0110\u01b0\u1ee3c s\u1eed d\u1ee5ng r\u1ed9ng r\u00e3i trong c\u00e1c d\u1ef1 \u00e1n k\u1ef9 thu\u1eadt t\u1ea1i \u00dac v\u00e0 New Zealand.<\/span>\n <\/div>\n
    \n ✓ Giao di\u1ec7n \u0111\u1ed9ng c\u01a1 IEC 60034<\/strong><\/strong>
    \n K\u00edch th\u01b0\u1edbc m\u1eb7t b\u00edch v\u00e0 tr\u1ee5c theo ti\u00eau chu\u1ea9n IEC.<\/strong> T\u01b0\u01a1ng th\u00edch tr\u1ef1c ti\u1ebfp v\u1edbi t\u1ea5t c\u1ea3 c\u00e1c th\u01b0\u01a1ng hi\u1ec7u \u0111\u1ed9ng c\u01a1 l\u1edbn.<\/span>\n <\/div>\n
    \n \u2713 Chu\u1ea9n b\u1ea3o v\u1ec7 IP65 \/ IP66<\/strong>
    \n Ch\u1ed1ng b\u1ee5i v\u00e0 ch\u1ecbu \u0111\u01b0\u1ee3c tia n\u01b0\u1edbc \u00e1p l\u1ef1c cao. Ti\u00eau chu\u1ea9n cho c\u00e1c c\u00f4ng tr\u00ecnh l\u1eafp \u0111\u1eb7t ngo\u00e0i tr\u1eddi t\u1ea1i \u00dac.<\/span>\n <\/div>\n<\/div>\n

    <\/p>\n

    Nghi\u00ean c\u1ee9u tr\u01b0\u1eddng h\u1ee3p<\/h2>\n
    \n
    \n 🐄<\/span><\/p>\n
    \n

    Case Study 1 — Cattle Feedlot TMR Mixer, Darling Downs QLD<\/h3>\n
    \n Beef Cattle Feedlot<\/span>
    \n Vertical Auger TMR Mixer Wagon — 14 m³<\/span>\n <\/div>\n

    V\u1ea5n \u0111\u1ec1 kh\u00e1ch h\u00e0ng g\u1eb7p ph\u1ea3i:<\/strong> A 10,000-head cattle feedlot was experiencing worm gearbox failure every 5–6 months on their TMR mixer wagon. Post-failure inspection consistently showed worm wheel wear concentrated on one side of the tooth face — evidence of misalignment between the gearbox and the auger drive shaft.<\/p>\n

    Gi\u1ea3i ph\u00e1p:<\/strong> NRV-110 worm gearbox (ratio 40:1, SF=1.75, taper roller bearings) plus a flexible jaw coupling between the gearbox output and auger input shaft to absorb residual misalignment.<\/p>\n

    K\u1ebft qu\u1ea3:<\/strong> Worm wheel life extended from 5–6 months to over 22 months at first replacement assessment. The feedlot maintenance manager estimated annual saving of $11,000 in gearbox parts and labour.<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n

    \n
    \n 🐑<\/span><\/p>\n
    \n

    Case Study 2 — Sheep Station Supplementary Feeder, Broken Hill NSW<\/h3>\n
    \n Sheep Grazing<\/span>
    \n Horizontal Paddle Feed Mixer — Remote Station<\/span>\n <\/div>\n

    V\u1ea5n \u0111\u1ec1 kh\u00e1ch h\u00e0ng g\u1eb7p ph\u1ea3i:<\/strong> A remote sheep station 180 km from the nearest town was experiencing feed mixer gearbox oil contamination — fine red dust from the arid environment was ingressing through shaft seals, mixing with the mineral oil and causing abrasive wear on the worm shaft thread.<\/p>\n

    Gi\u1ea3i ph\u00e1p:<\/strong> NMRV-090 worm gearbox with IP65 housing, double-lip FKM shaft seals, and synthetic PAO lubricant (5,000-hour change interval) was installed.<\/p>\n

    K\u1ebft qu\u1ea3:<\/strong> No dust contamination events in 30 months of operation and three seasonal inspections. The station owner confirmed the gearbox required only a single oil level check per season.<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n

    \n
    \n 🥛<\/span><\/p>\n
    \n

    Case Study 3 — Dairy Farm Feed Mixer, Gippsland VIC<\/h3>\n
    \n Dairy Farming<\/span>
    \n Reel Mixer Wagon — Mixed Dairy TMR<\/span>\n <\/div>\n

    V\u1ea5n \u0111\u1ec1 kh\u00e1ch h\u00e0ng g\u1eb7p ph\u1ea3i:<\/strong> A Gippsland dairy farm’s reel mixer wagon gearbox was experiencing seal failures during winter — cold-start condensation and wet silage splash were forming an oil-water emulsion that accelerated bearing and worm surface corrosion.<\/p>\n

    Gi\u1ea3i ph\u00e1p:<\/strong> NRV series worm gearbox (ratio 30:1, cast iron, double-lip FKM seals, synthetic ISO VG 320, IP65, corrosion-inhibited housing coating) replaced the standard-specification unit.<\/p>\n

    K\u1ebft qu\u1ea3:<\/strong> Oil emulsification eliminated over the first full winter post-installation. Bearing inspection at 12 months showed no corrosion pitting.<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/div>\n

    <\/p>\n

    \n \"D\u00f2ng<\/p>\n

    H\u1ed9p s\u1ed1 tr\u1ee5c v\u00edt d\u00f2ng NMRV \/ NRV \u2014 k\u00edch th\u01b0\u1edbc khung t\u1eeb 025 \u0111\u1ebfn 150, s\u1ea3n xu\u1ea5t theo ti\u00eau chu\u1ea9n ISO 9001:2015<\/p>\n<\/div>\n

    <\/p>\n

    T\u1ea1i sao n\u00ean ch\u1ecdn ch\u00fang t\u00f4i?<\/h2>\n
    \n
    \n
    🏭<\/div>\n

    H\u01a1n 20 n\u0103m kinh nghi\u1ec7m s\u1ea3n xu\u1ea5t<\/strong>
    \n S\u1ea3n xu\u1ea5t \u0111\u1ea1t ch\u1ee9ng nh\u1eadn ISO t\u1eeb n\u0103m 2003. H\u1ed9p s\u1ed1 tr\u1ee5c v\u00edt \u0111\u01b0\u1ee3c xu\u1ea5t kh\u1ea9u sang h\u01a1n 60 qu\u1ed1c gia.<\/span>\n <\/div>\n

    \n
    📞<\/div>\n

    H\u1ed7 tr\u1ee3 k\u1ef9 thu\u1eadt t\u1eeb xa<\/strong>
    \n Ch\u1ea9n \u0111o\u00e1n qua cu\u1ed9c g\u1ecdi video tr\u00ean kh\u1eafp c\u00e1c m\u00fai gi\u1edd c\u1ee7a \u00dac. Ph\u1ea3n h\u1ed3i nhanh ch\u00f3ng m\u00e0 kh\u00f4ng c\u1ea7n \u0111\u1ebfn t\u1eadn n\u01a1i.<\/span>\n <\/div>\n

    \n
    ⚙️<\/div>\n

    T\u00f9y ch\u1ec9nh OEM \/ ODM<\/strong>
    \n Tr\u1ee5c kh\u00f4ng ti\u00eau chu\u1ea9n, l\u1ed7 r\u1ed7ng, m\u1eb7t b\u00edch v\u00e0 t\u1ef7 l\u1ec7 t\u00f9y ch\u1ec9nh. C\u00f3 th\u1ec3 xem x\u00e9t b\u1ea3n v\u1ebd \u0111\u1ea7y \u0111\u1ee7.<\/span>\n <\/div>\n

    \n
    💰<\/div>\n

    Gi\u00e1 tr\u1ecb tr\u1ef1c ti\u1ebfp t\u1eeb nh\u00e0 m\u00e1y<\/strong>
    \n Kh\u00f4ng c\u00f3 hoa h\u1ed3ng cho nh\u00e0 ph\u00e2n ph\u1ed1i. Gi\u00e1 b\u00e1n s\u1ec9 minh b\u1ea1ch v\u1edbi m\u1ee9c ti\u1ebft ki\u1ec7m \u0111\u00e1ng k\u1ec3 cho c\u00e1c \u0111\u01a1n h\u00e0ng l\u1eb7p l\u1ea1i.<\/span>\n <\/div>\n

    \n
    📦<\/div>\n

    H\u00e0ng c\u00f3 s\u1eb5n & Giao h\u00e0ng nhanh<\/strong>
    \n Khung NMRV\/NRV ti\u00eau chu\u1ea9n c\u00f3 s\u1eb5n trong kho. \u0110\u01a1n h\u00e0ng kh\u1ea9n c\u1ea5p s\u1ebd \u0111\u01b0\u1ee3c x\u1eed l\u00fd b\u1eb1ng d\u1ecbch v\u1ee5 v\u1eadn chuy\u1ec3n nhanh.<\/span>\n <\/div>\n<\/div>\n

    <\/p>\n

    C\u00e2u h\u1ecfi th\u01b0\u1eddng g\u1eb7p<\/h2>\n
    \n▼ What service factor should I use when selecting a worm gearbox for a feed mixer?<\/summary>\n
    Standard feed mixer service: SF=1.5. For mixers handling frozen silage or compacted dense feeds in winter: SF=2.0. For mineral supplement dosing drives with uniform steady load: SF=1.0–1.25. Apply the service factor to the calculated running torque to get the selection torque, then choose a frame with a rated output torque equal to or exceeding the selection torque.<\/div>\n<\/details>\n
    \n▼ What type of coupling should I use between the worm gearbox and the feed mixer auger shaft?<\/summary>\n
    For vertical auger TMR mixers, a rigid flange coupling or directly bolted hollow bore connection is common, but only if shaft alignment can be maintained within 0.1 mm TIR. Where alignment is difficult to control, a flexible jaw or disc coupling is strongly recommended to absorb angular and parallel misalignment and prevent side-loading the gearbox output bearing.<\/div>\n<\/details>\n
    \n▼ How long should a worm gearbox last on a feed mixer, and what are early warning signs of failure?<\/summary>\n
    A correctly selected and maintained worm gearbox on a feed mixer should achieve 5,000–10,000 operating hours before worm wheel replacement is required. Early warning signs: (1) oil temperature rising above normal during operation, (2) unusual noise change (whine or rumble), (3) oil discolouration to grey or milky.<\/div>\n<\/details>\n
    \n▼ Can I use a single-phase motor with a worm gearbox for a small on-farm feed mixer?<\/summary>\n
    Yes — worm gearboxes are motor-agnostic and can be paired with single-phase motors, common on Australian farms without three-phase power supply. Single-phase capacitor-start motors provide high starting torque suitable for the cold-start demands of feed mixers. For mixers above approximately 5 kW, three-phase or generator-fed supply is strongly recommended for adequate starting current.<\/div>\n<\/details>\n
    \n▼ What is the correct oil viscosity for a feed mixer worm gearbox in Australian conditions?<\/summary>\n
    Mineral oil: ISO VG 220 for ambient temperatures 10–35°C; ISO VG 320 for summer ambient above 35°C. Synthetic PAO: ISO VG 320 covers the full Australian temperature range in a single grade, which simplifies stock management and extends change intervals to 5,000 hours. Avoid gear oils with active sulphur EP additives — these attack the phosphor bronze worm wheel at operating temperatures above 70°C.<\/div>\n<\/details>\n

    <\/p>\n

    \n

    Get Feed Mixer Gearbox Selection Advice<\/h2>\n

    C\u00e1c k\u1ef9 s\u01b0 c\u1ee7a ch\u00fang t\u00f4i s\u1eb5n s\u00e0ng t\u01b0 v\u1ea5n cho b\u1ea1n m\u1eabu h\u1ed9p s\u1ed1 tr\u1ee5c v\u00edt, t\u1ef7 s\u1ed1 truy\u1ec1n, c\u1ea5u h\u00ecnh tr\u1ee5c v\u00e0 c\u00e1ch l\u1eafp \u0111\u1eb7t ph\u00f9 h\u1ee3p nh\u1ea5t cho \u1ee9ng d\u1ee5ng c\u1ee7a b\u1ea1n.<\/p>\n

    \n Y\u00eau c\u1ea7u b\u00e1o gi\u00e1 mi\u1ec5n ph\u00ed<\/a>
    \n     Xem t\u1ea5t c\u1ea3 s\u1ea3n ph\u1ea9m<\/a>\n <\/div>\n

    T\u00ecm hi\u1ec3u th\u00eam v\u1ec1... trang \u1ee9ng d\u1ee5ng<\/a> ho\u1eb7c t\u00ecm hi\u1ec3u th\u00eam v\u1ec1 ch\u00fang t\u00f4i tr\u00ean trang gi\u1edbi thi\u1ec7u v\u1ec1 ch\u00fang t\u00f4i<\/a>.<\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

    Worm Gear Reducer for Feed Mixers Feed mixers — vertical auger mixers, horizontal paddle mixers, and reel-type total mixed ration (TMR) wagons — are the central processing equipment in Australian cattle feedlots, sheep stations, and dairy farms. They must mix dry fodder, silage, concentrates, and minerals into a homogeneous ration under varying load conditions, often […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[2321],"tags":[2487,2484,2486,2485,911],"class_list":["post-865","post","type-post","status-publish","format-standard","hentry","category-agriculture","tag-auger-mixer","tag-feed-mixer-drive","tag-livestock-feed","tag-tmr-mixer-gearbox","tag-worm-reducer"],"_links":{"self":[{"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/posts\/865","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/comments?post=865"}],"version-history":[{"count":1,"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/posts\/865\/revisions"}],"predecessor-version":[{"id":951,"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/posts\/865\/revisions\/951"}],"wp:attachment":[{"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/media?parent=865"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/categories?post=865"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/nmrv063gearbox.com\/vi\/wp-json\/wp\/v2\/tags?post=865"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}