Categories: 矿业

Worm Gearbox for Belt Conveyor Systems

Belt conveyors are the circulatory system of Australia’s mining and bulk-materials industry, moving millions of tonnes of coal, iron ore, grain, and mineral aggregate every year. Behind every reliably running conveyor is a precisely selected drive unit — and the 蜗轮蜗杆箱 has earned its dominant position through a combination of self-locking geometry, compact right-angle output, and robust high-torque delivery.

The self-locking characteristic is particularly critical on inclined conveyors: when power is removed, the irreversible worm geometry prevents the loaded belt from reversing under gravity. This eliminates the need for a separate backstop or motorised brake on many installations, simplifying the mechanical design and reducing maintenance exposure.

Standard NMRV and NRV series aluminium or ductile-iron worm gearboxes are available in frames from 025 to 150, providing output torques from 2.6 N·m up to 4,200 N·m and reduction ratios from 5:1 to 100:1 in a single compact stage. Two-stage tandem configurations extend this to 3,600:1.

行业应用及用例

In a typical belt conveyor drive arrangement, the 蜗轮蜗杆箱 sits between the electric motor and the conveyor head drum. Key application points include:

Head-end drive units on horizontal conveyors — steady torque, self-lock on stop
Inclined conveyor drives — self-locking prevents roll-back under loaded belt weight
Take-up winch drives — precise low-speed tension control on counterweight systems
Belt weigh feeder drives — accurate, vibration-free low-speed output

Materials: Worm shaft in surface-hardened alloy steel 20CrMnTi (HRC 58–62). Worm wheel in centrifugally cast phosphor bronze. Housing in ductile iron GGG40 with IP65 dust-and-jet-water sealing.

Working principle: The helical worm thread engages the bronze wheel teeth at 90°. Back-driving from the wheel side is geometrically prevented when the lead angle is below the friction angle — this is the self-locking mechanism at the heart of safe conveyor operation.

技术规格及选型指南

使用下表确定合适的型号。关键参数包括减速比、输出扭矩、轴尺寸和壳体材料。务必使用正确的参数。 服务系数（SF） 适用于您的占空比。

范围	典型范围/值	精选笔记
比率	5:1 – 100:1 (single-stage)	Two-stage tandem available up to 3,600:1
输出扭矩	2.6 – 4,200 N·m	Dependent on frame size 025–150
Input Shaft Diameter	11 – 42 mm	IEC 60034 standard flange sizes B5/B14
Output Shaft Diameter	14 – 50 mm (solid)	Hollow bore available from frame 030 up
房屋材料	Aluminium alloy / Ductile iron GGG40	Stainless steel 316 available on request
Mounting Type	Foot / Flange / Shaft-mounted	All standard orientations F1–F8
保护等级	IP65 standard; IP66 / IP69K optional	Specify at order for outdoor / washdown duty

► 服务系数（SF）： Uniform load SF=1.0 | Moderate shock SF=1.25–1.5 | Heavy shock / 24 h continuous SF=1.75–2.0

► 环境温度： Standard units rated –10°C to +40°C. Australian high-ambient sites (>45°C) require high-temperature lubricant and 15% thermal derating.

NMRV/NRV系列蜗轮减速机

Available in frame sizes 025 through 150. Single-stage reduction ratios 5:1 to 100:1. Output torque up to 4,200 N·m. Aluminium or ductile iron housing. IEC B5/B14 motor flange. IP65 standard, IP66/IP67 optional. Synthetic or mineral oil lubrication.

合规与质量标准

✓ ISO 9001:2015
通过质量管理体系认证。所有产品均按照有据可查的质量管理体系生产和检验。

✓ CE Certification
符合欧盟机械指令CE认证标准。广泛应用于澳大利亚和新西兰的工程项目中。

✓ IEC 60034 电机接口
IEC标准法兰和轴尺寸。 可直接安装，兼容所有主流电机品牌。

✓ IP65 / IP66 Protection
防尘且耐高压水射流。澳大利亚户外安装的标准配置。

案例研究

⛏️

Case Study 1 — Open-Cut Coal Mine, Hunter Valley NSW

矿业
Inclined Belt Conveyor

客户痛点： A coal mine was experiencing rollback on a 15° inclined conveyor each time the belt tripped under overload. The mechanical backstop failed twice in six months, causing 18 hours of downtime per incident.

解决方案： NMRV-110 worm gearboxes (ratio 60:1, ductile iron, IP65) were installed on both drive stations. The inherent self-locking eliminated the need for the external backstop entirely.

结果： Zero rollback incidents over 14 months. Annual maintenance cost reduced by 35%. The mine standardised the same model across three further inclined conveyors on site.

🏭

Case Study 2 — Mineral Processing Plant, Western Australia

矿业
Horizontal Ore Conveyor

客户痛点： A WA iron ore processor needed to replace an ageing helical gearbox generating 74 dB(A) of gear noise, with oil changes every 1,500 hours due to worn lip seals.

解决方案： NRV series worm gearbox (ratio 40:1, 1,800 N·m) with upgraded FKM double-lip seals and synthetic PAO gear oil.

结果： Operating noise reduced to 61 dB(A). Oil change interval extended to 5,000 hours. Zero seal leaks during two 12-month inspection cycles.

🌾

Case Study 3 — Grain Handling Terminal, Port of Geraldton WA

Bulk Handling
Belt Weigh Feeder

客户痛点： A grain terminal’s weigh feeder was overspeeding by up to 8%, causing inaccurate throughput measurement and regulatory compliance issues.

解决方案： NMRV-063 worm gearboxes (ratio 80:1) replaced the helical-bevel units. Smooth, low-backlash output eliminated speed hunting corrupting the load cell signal.

结果： Throughput accuracy improved to within 0.3% of certified scale. Port authority compliance reinstated within one week.

NMRV / NRV series worm gearboxes — frame sizes 025 to 150, manufactured to ISO 9001:2015

为什么选择我们？

🏭

20余年制造经验
自 2003 年起获得 ISO 认证生产。蜗轮减速机已销往 60 多个国家。

📞

远程技术支持
提供跨澳大利亚时区的视频通话诊断服务。无需现场访问，即可快速响应。

⚙️

OEM/ODM定制
非标轴、空心孔、定制法兰和传动比。可提供完整图纸审核。

💰

厂家直销价格
无分销商利润。透明的批量定价，重复订购可享受大幅折扣。

📦

现货供应，快速发货
标准NMRV/NRV框架现货供应。紧急订单将通过快递发货。

常见问题解答

▼ What is the difference between NMRV and NRV worm gearboxes for conveyor applications?

NMRV units feature an aluminium alloy housing — lighter and suited to lighter-duty or indoor drives. NRV units use cast iron — greater rigidity and thermal mass, preferred for continuous heavy-load mining conveyors. Both share identical internal geometry and are interchangeable in mounting footprint within the same frame size.

▼ How do I calculate the required reduction ratio for my belt conveyor?

Required ratio = Motor RPM ÷ Required drum RPM. Drum RPM = (Belt speed m/s × 60) ÷ (π × drum diameter m). For example, 1.5 m/s belt on a 400 mm drum needs 71.6 RPM. With a 1,400 RPM motor, required ratio is 19.6:1 — select 20:1 or 25:1. Contact our engineering team for a free calculation.

▼ Does a worm gearbox on an inclined conveyor require a separate anti-rollback device?

For inclinations up to approximately 20° and loads within the rated self-locking torque, worm geometry alone provides sufficient anti-rollback protection. Above 20° inclination or for very high-inertia belt loads, a supplementary backstop or brake is recommended as safety redundancy.

▼ What IP protection rating should I specify for a mine-site belt conveyor gearbox?

IP65 is the minimum for all open mine-site conveyor applications. For conveyors near water sprays, dewatering areas, or underground wet zones, specify IP66 or IP67. Our standard NMRV/NRV range is IP65 as standard, with IP66 and IP67 available as factory options.

▼ What lubricant is recommended for worm gearboxes on mining conveyors in hot Australian climates?

Standard mineral ISO VG 220–460 is suitable for ambient temperatures up to 35°C. For outback sites regularly exceeding 40°C, synthetic PAO ISO VG 320 is recommended — it reduces internal operating temperature by 8–12°C and extends the oil change interval from 2,000 hours to 5,000+ hours.

▼ Can worm gearboxes be used for reversing conveyor applications?

Yes — worm gearboxes can be driven in both directions at the same rated torque. The self-locking feature applies in both directions. For applications requiring free coasting in reverse, a low-lead-angle (non-self-locking) ratio must be specifically selected. Consult our technical team to confirm self-locking status for your chosen ratio.