Belt conveyors are the circulatory system of Australia’s mining and bulk-materials industry, moving millions of tonnes of coal, iron ore, grain, and mineral aggregate every year. Behind every reliably running conveyor is a precisely selected drive unit — and the علبة تروس دودة has earned its dominant position through a combination of self-locking geometry, compact right-angle output, and robust high-torque delivery.
The self-locking characteristic is particularly critical on inclined conveyors: when power is removed, the irreversible worm geometry prevents the loaded belt from reversing under gravity. This eliminates the need for a separate backstop or motorised brake on many installations, simplifying the mechanical design and reducing maintenance exposure.
Standard NMRV and NRV series aluminium or ductile-iron worm gearboxes are available in frames from 025 to 150, providing output torques from 2.6 N·m up to 4,200 N·m and reduction ratios from 5:1 to 100:1 in a single compact stage. Two-stage tandem configurations extend this to 3,600:1.
In a typical belt conveyor drive arrangement, the علبة تروس دودة sits between the electric motor and the conveyor head drum. Key application points include:
Materials: Worm shaft in surface-hardened alloy steel 20CrMnTi (HRC 58–62). Worm wheel in centrifugally cast phosphor bronze. Housing in ductile iron GGG40 with IP65 dust-and-jet-water sealing.
Working principle: The helical worm thread engages the bronze wheel teeth at 90°. Back-driving from the wheel side is geometrically prevented when the lead angle is below the friction angle — this is the self-locking mechanism at the heart of safe conveyor operation.
استخدم الجدول أدناه لتحديد الطراز المناسب. تشمل المعايير الرئيسية نسبة التخفيض، وعزم الدوران الناتج، وأبعاد العمود، ومادة الغلاف. استخدم دائمًا الطراز الصحيح. عامل الخدمة (SF) لدورة عملك.
| المعلمة | النطاق / القيمة النموذجية | ملاحظات الاختيار |
|---|---|---|
| نسبة | 5:1 – 100:1 (single-stage) | Two-stage tandem available up to 3,600:1 |
| عزم الدوران الناتج | 2.6 – 4,200 N·m | Dependent on frame size 025–150 |
| Input Shaft Diameter | 11 – 42 mm | IEC 60034 standard flange sizes B5/B14 |
| Output Shaft Diameter | 14 – 50 mm (solid) | Hollow bore available from frame 030 up |
| مواد البناء | Aluminium alloy / Ductile iron GGG40 | Stainless steel 316 available on request |
| Mounting Type | Foot / Flange / Shaft-mounted | All standard orientations F1–F8 |
| فئة الحماية | IP65 standard; IP66 / IP69K optional | Specify at order for outdoor / washdown duty |
► عامل الخدمة (SF): حمل منتظم SF=1.0 | صدمة متوسطة SF=1.25–1.5 | صدمة شديدة / 24 ساعة متواصلة SF=1.75–2.0
► درجة الحرارة المحيطة: الوحدات القياسية مصنفة من -10 درجة مئوية إلى +40 درجة مئوية. تتطلب المواقع الأسترالية ذات درجات الحرارة المحيطة المرتفعة (>45 درجة مئوية) مواد تشحيم عالية الحرارة وتخفيض حراري 15%.
علبة تروس دودة من سلسلة NMRV / NRV
متوفر بأحجام إطارات من 025 إلى 150. نسب تخفيض أحادية المرحلة من 5:1 إلى 100:1. عزم دوران خرج يصل إلى 4200 نيوتن متر. هيكل من الألومنيوم أو الحديد المطاوع. شفة محرك IEC B5/B14. معيار IP65، وIP66/IP67 اختياري. تشحيم بزيت صناعي أو معدني.
⛏️
مشكلة العميل: A coal mine was experiencing rollback on a 15° inclined conveyor each time the belt tripped under overload. The mechanical backstop failed twice in six months, causing 18 hours of downtime per incident.
حل: NMRV-110 worm gearboxes (ratio 60:1, ductile iron, IP65) were installed on both drive stations. The inherent self-locking eliminated the need for the external backstop entirely.
نتيجة: Zero rollback incidents over 14 months. Annual maintenance cost reduced by 35%. The mine standardised the same model across three further inclined conveyors on site.
🏭
مشكلة العميل: A WA iron ore processor needed to replace an ageing helical gearbox generating 74 dB(A) of gear noise, with oil changes every 1,500 hours due to worn lip seals.
حل: NRV series worm gearbox (ratio 40:1, 1,800 N·m) with upgraded FKM double-lip seals and synthetic PAO gear oil.
نتيجة: Operating noise reduced to 61 dB(A). Oil change interval extended to 5,000 hours. Zero seal leaks during two 12-month inspection cycles.
🌾
مشكلة العميل: A grain terminal’s weigh feeder was overspeeding by up to 8%, causing inaccurate throughput measurement and regulatory compliance issues.
حل: NMRV-063 worm gearboxes (ratio 80:1) replaced the helical-bevel units. Smooth, low-backlash output eliminated speed hunting corrupting the load cell signal.
نتيجة: Throughput accuracy improved to within 0.3% of certified scale. Port authority compliance reinstated within one week.
علب تروس دودة من سلسلة NMRV / NRV - أحجام الإطارات من 025 إلى 150، مصنعة وفقًا لمعيار ISO 9001:2015
أكثر من 20 عامًا من التصنيع
إنتاج معتمد من ISO منذ عام 2003. يتم شحن علب التروس الدودية إلى أكثر من 60 دولة.
الدعم الفني عن بعد
تشخيص الأعطال عبر مكالمات الفيديو في جميع المناطق الزمنية الأسترالية. استجابة سريعة دون الحاجة إلى زيارات ميدانية.
تخصيص OEM / ODM
أعمدة غير قياسية، تجويف مجوف، حواف ونسب مخصصة. مراجعة الرسم الكاملة متاحة.
القيمة المباشرة من المصنع
لا يوجد هامش ربح للموزعين. أسعار شفافة للكميات الكبيرة مع توفير كبير على الطلبات المتكررة.
متوفر في المخزون وشحن سريع
تتوفر إطارات NMRV/NRV القياسية في المخزون. يتم تجهيز الطلبات العاجلة للشحن السريع.
مهندسونا على استعداد للتوصية بنموذج علبة التروس الدودية المناسب، والنسبة، وتكوين العمود، وترتيب التركيب لتطبيقك.
استكشف المزيد حول صفحة التطبيقات أو تعرف علينا من خلال صفحة "نبذة عنا".
مخفض سرعة محرك الدودة للأبواب الأوتوماتيكية وحواجز مواقف السيارات. الأبواب الأوتوماتيكية وحواجز مواقف السيارات هي...
مخفض سرعة التروس الدودية للرافعات الصناعية والرافعات العلوية ومصاعد البضائع، و...
علبة تروس دودة لآلات تعبئة الصناديق الأوتوماتيكية وآلات الطاولة الدوارة. آلات تعبئة الصناديق الأوتوماتيكية و...
مخفض سرعة لولبي لآلات تغليف الأفلام، آلات تغليف الأفلام - آلات اللحام الحراري، خطوط التغليف الانسيابي،...
محرك التروس الدودية لأنظمة التحكم في زاوية ميل توربينات الرياح. شكلت طاقة الرياح 39.41 تريليون طن من...
علبة تروس دودة لأنظمة تتبع الطاقة الشمسية. أستراليا تتصدر العالم في نشر الطاقة الشمسية لكل...