Worm Gearbox for Belt Conveyor Systems
Belt conveyors are the circulatory system of Australia’s mining and bulk-materials industry, moving millions of tonnes of coal, iron ore, grain, and mineral aggregate every year. Behind every reliably running conveyor is a precisely selected drive unit — and the wormwieloverbrenging has earned its dominant position through a combination of self-locking geometry, compact right-angle output, and robust high-torque delivery.
The self-locking characteristic is particularly critical on inclined conveyors: when power is removed, the irreversible worm geometry prevents the loaded belt from reversing under gravity. This eliminates the need for a separate backstop or motorised brake on many installations, simplifying the mechanical design and reducing maintenance exposure.
Standard NMRV and NRV series aluminium or ductile-iron worm gearboxes are available in frames from 025 to 150, providing output torques from 2.6 N·m up to 4,200 N·m and reduction ratios from 5:1 to 100:1 in a single compact stage. Two-stage tandem configurations extend this to 3,600:1.
Industriële toepassingen en gebruiksvoorbeelden
In a typical belt conveyor drive arrangement, the wormwieloverbrenging sits between the electric motor and the conveyor head drum. Key application points include:
- Head-end drive units on horizontal conveyors — steady torque, self-lock on stop
- Inclined conveyor drives — self-locking prevents roll-back under loaded belt weight
- Take-up winch drives — precise low-speed tension control on counterweight systems
- Belt weigh feeder drives — accurate, vibration-free low-speed output
Materials: Worm shaft in surface-hardened alloy steel 20CrMnTi (HRC 58–62). Worm wheel in centrifugally cast phosphor bronze. Housing in ductile iron GGG40 with IP65 dust-and-jet-water sealing.
Working principle: The helical worm thread engages the bronze wheel teeth at 90°. Back-driving from the wheel side is geometrically prevented when the lead angle is below the friction angle — this is the self-locking mechanism at the heart of safe conveyor operation.
Technische specificaties en selectiegids
Gebruik de onderstaande tabel om het juiste model te selecteren. Belangrijke parameters zijn onder andere de overbrengingsverhouding, het uitgangskoppel, de asafmetingen en het materiaal van de behuizing. Gebruik altijd de juiste tabel. Servicefactor (SF) voor uw inschakelduur.
| Parameter | Typisch bereik / waarde | Selectie-aantekeningen |
|---|---|---|
| Verhouding | 5:1 – 100:1 (single-stage) | Two-stage tandem available up to 3,600:1 |
| Uitgangskoppel | 2.6 – 4,200 N·m | Dependent on frame size 025–150 |
| Input Shaft Diameter | 11 – 42 mm | IEC 60034 standard flange sizes B5/B14 |
| Output Shaft Diameter | 14 – 50 mm (solid) | Hollow bore available from frame 030 up |
| Behuizingsmateriaal | Aluminium alloy / Ductile iron GGG40 | Stainless steel 316 available on request |
| Mounting Type | Foot / Flange / Shaft-mounted | All standard orientations F1–F8 |
| Beschermingsklasse | IP65 standard; IP66 / IP69K optional | Specify at order for outdoor / washdown duty |
► Servicefactor (SF): Uniform load SF=1.0 | Moderate shock SF=1.25–1.5 | Heavy shock / 24 h continuous SF=1.75–2.0
► Omgevingstemperatuur: Standard units rated –10°C to +40°C. Australian high-ambient sites (>45°C) require high-temperature lubricant and 15% thermal derating.
NMRV / NRV-serie wormwieloverbrenging
Available in frame sizes 025 through 150. Single-stage reduction ratios 5:1 to 100:1. Output torque up to 4,200 N·m. Aluminium or ductile iron housing. IEC B5/B14 motor flange. IP65 standard, IP66/IP67 optional. Synthetic or mineral oil lubrication.
Naleving en kwaliteitsnormen
Gecertificeerd kwaliteitsmanagementsysteem. Elk geproduceerd en geïnspecteerd product voldoet aan een gedocumenteerd kwaliteitsmanagementsysteem met volledige traceerbaarheid.
CE-gecertificeerd conform de EU-machinerichtlijn. Breed geaccepteerd in Australische en Nieuw-Zeelandse engineeringprojecten.
IEC-standaard flens- en asafmetingen. Directe montage compatibel met alle belangrijke motormerken.
Stofdicht en bestand tegen hogedrukspuiten. De standaard voor buiteninstallaties in Australië.
Casestudies
⛏️
Case Study 1 — Open-Cut Coal Mine, Hunter Valley NSW
Inclined Belt Conveyor
Pijnpunt van de klant: A coal mine was experiencing rollback on a 15° inclined conveyor each time the belt tripped under overload. The mechanical backstop failed twice in six months, causing 18 hours of downtime per incident.
Oplossing: NMRV-110 worm gearboxes (ratio 60:1, ductile iron, IP65) were installed on both drive stations. The inherent self-locking eliminated the need for the external backstop entirely.
Resultaat: Zero rollback incidents over 14 months. Annual maintenance cost reduced by 35%. The mine standardised the same model across three further inclined conveyors on site.
🏭
Case Study 2 — Mineral Processing Plant, Western Australia
Horizontal Ore Conveyor
Pijnpunt van de klant: A WA iron ore processor needed to replace an ageing helical gearbox generating 74 dB(A) of gear noise, with oil changes every 1,500 hours due to worn lip seals.
Oplossing: NRV series worm gearbox (ratio 40:1, 1,800 N·m) with upgraded FKM double-lip seals and synthetic PAO gear oil.
Resultaat: Operating noise reduced to 61 dB(A). Oil change interval extended to 5,000 hours. Zero seal leaks during two 12-month inspection cycles.
🌾
Case Study 3 — Grain Handling Terminal, Port of Geraldton WA
Belt Weigh Feeder
Pijnpunt van de klant: A grain terminal’s weigh feeder was overspeeding by up to 8%, causing inaccurate throughput measurement and regulatory compliance issues.
Oplossing: NMRV-063 worm gearboxes (ratio 80:1) replaced the helical-bevel units. Smooth, low-backlash output eliminated speed hunting corrupting the load cell signal.
Resultaat: Throughput accuracy improved to within 0.3% of certified scale. Port authority compliance reinstated within one week.
NMRV / NRV series worm gearboxes — frame sizes 025 to 150, manufactured to ISO 9001:2015
Waarom voor ons kiezen?
Meer dan 20 jaar productie-ervaring
ISO-gecertificeerde productie sinds 2003. Wormwieloverbrengingen worden naar meer dan 60 landen verzonden.
Technische ondersteuning op afstand
Diagnostiek via videogesprekken over alle Australische tijdzones heen. Snelle respons zonder bezoek ter plaatse.
OEM/ODM-maatwerk
Niet-standaard assen, holle boringen, flenzen op maat en overbrengingsverhoudingen. Volledige tekeningbeoordeling beschikbaar.
Fabrieksdirecte waarde
Geen distributiemarge. Transparante volumeprijzen met aanzienlijke kortingen bij herhaalbestellingen.
Voorraad & snelle verzending
Standaard NMRV/NRV-frames op voorraad. Spoedbestellingen worden verwerkt en per exprespost verzonden.
Veelgestelde vragen
Get Expert Selection Help for Your Belt Conveyor Drive
Onze ingenieurs staan klaar om u te adviseren over het juiste wormwieloverbrengingsmodel, de juiste overbrengingsverhouding, asconfiguratie en montagemethode voor uw toepassing.
Ontdek meer op de aanvraagpagina of kom meer over ons te weten op de Over ons-pagina.
