Descrição
EP-NRV-E040 — Shaft-Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NRV-E040
| Parâmetro | Valor |
|---|---|
| Série | NRV-E (Eixo de entrada sólido, sem flange, eixo de saída com rotação helicoidal) |
| Distância do centro | 040 mm |
| Taxas de redução | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Potência de entrada nominal | Up to 0.55 kW |
| Faixa de velocidade de saída | 14 a 280 rpm (com entrada de 1400 rpm) |
| Torque máximo de saída | 3,118 N·m |
| Configuração de entrada | Eixo de entrada maciço (sem flange IEC) + eixo de saída helicoidal com rotação sem-fim |
| Eixo de entrada | entrada de eixo maciço com chaveta |
| Eixo de saída da cauda | Direção do parafuso sem-fim (coaxial com o eixo do parafuso sem-fim, extremidade oposta) |
| Material de construção | Liga de alumínio fundido |
| Material da roda sem-fim | Bronze fosforoso |
| Material do eixo sem-fim | Aço liga 20CrMnTi, cementado, retificado com precisão |
| Diâmetro do furo de saída | 18-22 mm H7 with keyway |
| Lubrificação | Óleo de engrenagem ISO VG 220 (adicionado de fábrica) |
| Posições de montagem | B3, B6, B7, B8, V5, V6 |
| Classe de proteção | IP54 |
| Temperatura ambiente | -10°C a +40°C |
NRV-E040 Performance Table (0.55 kW / 1400 r/min)
| Razão (i) | Velocidade de saída (rpm) | Torque de saída (N·m) | Fator de serviço (fs) |
|---|---|---|---|
| 7.5 | 187 | 1,315 | 2.5 |
| 10 | 140 | 1,447 | 1.9 |
| 15 | 93 | 1,657 | 1.3 |
| 20 | 70 | 1,824 | 1.0 |
| 25 | 56 | 1,964 | 0.8 |
| 30 | 47 | 2,087 | 0.9 |
| 40 | 35 | 2,298 | 1.6 |
| 50 | 28 | 2,475 | 1.3 |
| 60 | 23 | 2,630 | 1.3 |
| 80 | 18 | 2,895 | 1.0 |
| 100 | 14 | 3,118 | 1.0 |
✅ Principais funcionalidades e benefícios exclusivos
🔗 Eixo de saída com rotação helicoidal — O principal diferencial
The defining feature of the NRV-E040 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
📈 3,118 N·m Chain Drive with Encoder
The NRV-E040 delivers 3,118 N·m from a chain or belt input while simultaneously providing a tail shaft encoder output — the complete instrumented chain-drive solution in a single gearbox.
◯ Same Torque as Standard NRV040
The NRV-E040 delivers identical maximum output torque (3,118 N·m) to the standard NRV040, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Pronto para Encoder e Feedback
O eixo de saída traseiro fornece um ponto de conexão direta para encoders rotativos, tacogeradores e geradores de pulsos que monitoram a velocidade do eixo sem-fim em sistemas de controle de movimento de circuito fechado, eliminando suportes de encoder externos e componentes de acoplamento.
🚫 IP54 — Integridade com Vedação Dupla
Tanto o furo de saída principal quanto a saída do eixo de cauda são vedados com vedações labiais de contato duplo, mantendo a proteção IP54 em todas as orientações de montagem, sem vazamento de óleo em nenhuma das interfaces do eixo.
🏭 Cenários de Aplicação
⚙ Conveyor Speed Synchronisation
NMRV-E040 worm gearbox for multi-drive conveyor synchronisation systems. The tail shaft mounts a pulse encoder that feeds back to a master PLC, allowing all conveyor sections to maintain matched belt speeds.
🚮 Packaging & Labelling with Feedback
Industrial worm gear reducer with tail output shaft for packaging line label applicators and capping heads where encoder-verified torque delivery prevents label misregistration.
🌿 Agricultural Controlled Seeding
Corrosion-resistant NMRV-E worm gearbox for precision seeding machinery where tail-shaft encoder feedback to a GPS-linked controller varies seed rate in real time across paddock zones.
📥 Textile Tension Control
Worm gearmotor with tail shaft for textile winding machine let-off drives where real-time winding speed feedback via the tail shaft encoder maintains precise fabric tension throughout the roll.
🔎 Guia de Seleção
Worked Example — Feed Mill Speed Monitoring
Required: NRV-E040 at i=30, chain-driven from 0.37 kW line shaft at 1400 r/min, tail shaft to SCADA tachometer. Output speed = 47 r/min, torque = 2,087 N·m. Tail shaft: 24V tachogenerator, 18 mm bore. ✅ NRV-E040-30 selected.
⚖ NRV-E040 vs Standard NRV040
| Recurso | EP-NRV-E040 (with Tail Shaft) | EP-NRV040 (Standard) |
|---|---|---|
| Eixo de saída da cauda | ✅ Sim — direção da minhoca | Não |
| Montagem do codificador/feedback | Diretamente no eixo da cauda | Requer suporte externo |
| Acionamento de carga dupla | Sim — principal + cauda | Não — apenas uma saída |
| Torque de saída principal | 3,118 N·m | 3,118 N·m |
| Dimensões da Habitação | Ligeiramente mais comprido (protrusão da haste caudal) | Comprimento padrão |
| Entrada do eixo | Sim — eixo com chaveta maciça | Sim — eixo com chaveta maciça |
NRV-E040 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Chaveta |
|---|---|---|---|---|---|---|
| 78 | 82 | 128 | 164 | 6 | 18 | M6 |
❓ Perguntas Frequentes
What is the tail output shaft on the EP-NRV-E040 and how is it different from the main output?
The tail shaft on the NRV-E040 exits the housing in the worm-direction axis (opposite end of the worm shaft), while the main output bore is perpendicular (90 degrees) to the worm axis. The tail shaft is driven off the worm shaft end and is used for encoder mounting, tachometer connection, or light auxiliary drive, while the main output delivers the full 3,118 N·m load torque.
Does the tail shaft reduce the main output torque of the NRV-E040?
No. The tail shaft draws only the small torque needed for its connected device. The main output retains the full 3,118 N·m rating, identical to the standard NRV040.
What is the input shaft specification for the NRV-E040?
The NRV-E040 has a solid keyed input shaft (no IEC flange). The shaft diameter matches the equivalent NMRV040 bore input diameter. It accepts chain sprockets, belt pulleys, and rigid couplings. A bilateral (double-ended) input shaft is standard; single-end configuration available on request.
What encoder types can be mounted on the NRV-E040 tail shaft?
Any standard keyed rotary encoder with the matching bore diameter can be mounted on the NRV-E040 tail shaft: incremental (5V–24V, 100–10,000 PPR), SSI absolute, or resolver-type. Confirm the encoder bore size and keyway before ordering. The tail shaft key dimensions match the catalogue DZ shaft specification for NMRV-E040.
Can the NRV-E040 be used for closed-loop speed control in a chain-driven system?
Yes. The NRV-E040 is the ideal solution for chain-driven systems requiring closed-loop speed feedback. The chain drives the solid input shaft; the main output drives the load; and the tail shaft mounts an encoder that feeds speed/position data back to the controller. This eliminates the need for a separate encoder mounting bracket or a second independent encoder drive arrangement.
⭐ Avaliações de clientes
★★★★★
“Our feed-mill conveyor uses NRV-E040 units chain-driven from a central shaft. The tail-shaft encoders provide each station’s speed to our supervisory controller, enabling automatic load balancing across the conveyor network.”
Wayne F. — Mill Manager, Stock Feed Producer 🇦🇺 Australia (QLD)
★★★★★
“The NRV-E040 drives our batch-feed conveyor via chain and the tail shaft mounts a tachogenerator for our SCADA integration. The combined chain-input and encoder-output design was exactly what our control engineer needed.”
Rosa K. — Engineering Manager, Food Ingredients 🇳🇿 New Zealand
★★★★☆
“We used six NRV-E040 units on our inclined conveyor chain drives. The tail-shaft pulse counters feed our warehouse management system with real-time belt motion confirmation and the self-locking at ratio 40 prevents backdriving on power loss.”
Jan P. — Maintenance Engineer, Packaging Warehouse 🇨🇿 Czech Republic
⚙ Acessórios e Produtos Compatíveis
⚡ Motores IEC (B5/B14)
Motores CA padrão com flange IEC compatível. Versões para inversores VFD disponíveis para controle de velocidade variável.
🔗 Kits de Eixo de Saída
Simples sólido (DZ), duplo (SZ), flange de saída (F), flange oco (FL) — todos com tolerância H7/h6 e rasgos de chaveta padrão.
🔨 Braços e suportes de torque
Braços de reação de torque em aço para configurações de montagem em eixo; placas de montagem com pés para orientações B3/B6.
🔒 Kits de Vedação e Respiro
Kits de vedação labial de reposição, bujões de respiro ventilados e bujões de drenagem magnéticos para intervalos de manutenção prolongados.
Order the EP-NRV-E040
Our engineers will confirm the input shaft key dimensions, ratio, and encoder specification for your chain-driven closed-loop application.
O EP-NRV-E040 aluminium worm gearbox combines a solid shaft input (no IEC flange) with an additional worm-direction tail output shaft. Centre distance 040 mm, ratios 5 to 100, input power up to 0.55 kW, max output torque 3,118 N·m. The tail shaft enables simultaneous encoder feedback, safety interlock monitoring, or auxiliary drive — the ideal instrumented shaft-input worm gearbox for chain-driven closed-loop agricultural, industrial, and mining drive systems.
