Описание
EP-NRV110 — Shaft-Input Large-Frame Aluminium Worm Gear Reducer
Он EP-NRV110 is the shaft-input version of the NMRV110, sharing the same 110 mm centre distance, 9,232 N·m maximum output torque, and 7.5 kW input power rating in an identical die-cast aluminium housing, but configured with a solid keyed input shaft in place of the bore-input IEC flange. This configuration makes the NRV110 the natural choice when power arrives via chain sprocket, belt pulley, hydraulic motor output, or PTO-driven countershaft — driving arrangements that cannot present an IEC flange face to the gearbox. Compared with the NRV090 at 90 mm centre distance, the NRV110 delivers 26% more output torque, enabling it to handle heavier chain-driven loads while maintaining the NRV series’s lightweight aluminium housing and corrosion-resistant finish. In Australian industry, the NRV110 is particularly valued for large crane and hoist chain-driven travel mechanisms and high-power hydraulic-motor-driven industrial mixing and material handling equipment, where the solid shaft input integrates naturally into existing chain or belt drive train layouts without requiring an IEC motor adaptor or modifying the drive geometry.
Technical Specifications — EP-NRV110
| Параметр | Ценить |
|---|---|
| Ряд | NRV (входной вал цельный, без входного фланца) |
| Расстояние между центрами | 110 mm |
| Коэффициенты снижения | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Номинальная входная мощность | Up to 7.5 kW |
| Диапазон выходной скорости | 14–280 об/мин (при входной частоте 1400 об/мин) |
| Максимальный выходной крутящий момент | 9,232 N·m |
| Тип ввода | Входной вал цельный, без фланца IEC. |
| Материалы для корпуса | Литой алюминиевый сплав |
| Материал червячного колеса | Фосфорная бронза |
| Материал червячного вала | Легированная сталь 20CrMnTi, цементированная, прецизионная шлифовка. |
| Эквивалентный NMRV | NMRV110 (same internal assembly) |
| Диаметр выходного отверстия | 42 mm standard (H7 with keyway) |
| Смазка | Трансмиссионное масло ISO VG 220 (заводская заливка) |
| Места крепления | B3, B6, B7, B8, V5, V6 |
| Класс защиты | IP54 |
| Температура окружающей среды | от -10°C до +40°C |
NRV110 Performance Table (7.5 kW / 1400 r/min)
| Отношение (i) | Скорость вращения (об/мин) | Выходной крутящий момент (Н·м) | Fr max Входной сигнал (Н) | Коэффициент обслуживания (fs) |
|---|---|---|---|---|
| 7.5 | 187 | 2,359 | — | 2.6 |
| 10 | 140 | 2,597 | — | 2.0 |
| 15 | 93 | 2,973 | — | 1.5 |
| 20 | 70 | 3,272 | — | 1.1 |
| 25 | 56 | 3,509 | — | 1.1 |
| 30 | 47 | 3,745 | 12,000 | 1.1 |
| 40 | 35 | 4,285 | — | 1.9 |
| 50 | 28 | 4,905 | — | 1.4 |
| 60 | 23 | 5,399 | — | 1.4 |
| 80 | 18 | 5,816 | — | 1.2 |
| 100 | 14 | 9,232 | — | 1.5 |
✅ NRV110 Defining Features
🔗 7.5 kW Shaft Input — Maximum NRV Non-Flange Power
The NRV110 is the highest-power standard NRV shaft-input worm gearbox before the NRV130, accepting 7.5 kW from any chain, belt, hydraulic motor, or engine countershaft drive arrangement without requiring an IEC flange interface.
📈 9,232 N·m — Class-Leading Shaft-Input Torque
At 9,232 N·m, the NRV110 enables single-stage worm reduction on heavy drives that previously required a two-stage or parallel-shaft arrangement, simplifying chain-driven machine design significantly.
◯ 42 mm Output Bore — Heavy Shaft Interface
The 42 mm H7 output bore and DZ solid shaft accommodate the largest chain sprocket hubs and agitator shaft diameters in the 7.5 kW shaft-input power class.
⛁ 12,000 N Input Radial Load Capacity
The NRV110’s input shaft bearing assembly handles up to 12,000 N of radial load at ratio 30 — the highest in the NRV030–NRV110 series — enabling use with large-pitch heavy chain drives without exceeding bearing capacity.
🅆 IP54 Sustained at 7.5 kW Shaft Input
The NRV110’s reinforced lip seals and ribbed aluminium casting maintain IP54 protection at the maximum 7.5 kW input power level, even in the aggressive chain-oil splash environments typical of heavy industrial chain-drive systems.
🏭 Секторы применения
🚢 Crane & Hoist Chain Drives
Large-frame shaft-input worm gear reducer for overhead crane long-travel chain drives, hoist drum chain drives, and stacker-reclaimer slewing chain drives where hydraulic or engine power is delivered via roller chain.
📥 Port & Bulk Material Handling
High-torque NRV worm gearbox for port grain unloader conveyor chain drives, ship-loader boom conveyor chain drives, and dry-bulk terminal conveyor tail-end chain drives.
🍲 Mining Machinery Chain Drives
Heavy shaft-input worm gear reduction gearbox for surface mine face-conveyor chain drives, ore-crusher feeder conveyor chain drives, and underground mine coal-cutter chain drives in the 5.5–7.5 kW range.
⚙ Large Chemical & Industrial Reactors
Corrosion-resistant aluminium worm gearmotor alternative for large chemical reactor chain-driven agitator drives, polymer processing machine chain drives, and heavy industrial mixer chain-drive arrangements.
🔎 NRV110 Selection & Comparison
Design Example — Port Conveyor Chain Drive
Required: 7.5 kW engine at 1400 r/min (via roller chain) driving port conveyor at 18 r/min (i=80). Output torque from table = 5,816 N·m. For medium-shock port conveyor fs=1.5: demand = 5,816/1.5 = 3,877 N·m — well within rating. ✅ NRV110-80 selected.
NRV110 vs NMRV110 — Which Series to Choose
| Особенность | EP-NRV110 (Shaft Input) | EP-NMRV110 (Flange Input) |
|---|---|---|
| Входная конфигурация | Цельный вал со шпонкой | Входное отверстие с фланцем IEC |
| Лучший источник дисков | Цепь, ремень, муфта, гидравлический двигатель, ВОМ | Двигатель с прямым креплением по стандарту IEC. |
| Фланец IEC | Непригодный | Различные размеры B5/B14 |
| Выходной крутящий момент | Идентичные | Идентичные |
| Размеры жилого помещения | Идентичные | Идентичные |
| Самоблокировка при i≥30 | Да | Да |
| Лучше всего подходит для | Удаленные или нестандартные источники питания | Стандартные мотор-встроенные узлы |
NRV110 DZ/SZ Output Shaft Dimensions
| Г1 (мм) | К1 (мм) | L/DZ (мм) | L1/SZ (мм) | б2 (мм) | д ч6 (мм) | Ключевой путь |
|---|---|---|---|---|---|---|
| 155 | 162 | 249 | 324 | 12 | 42 | М16 |
❓ FAQs — EP-NRV110
What is the maximum input shaft radial load for the NRV110?
The Fr max for the NRV110 input shaft is 12,000 N at mid-shaft for ratio 30 — the highest in the NRV030–NRV110 range. This allows use with large-pitch heavy roller chains and V-belt drives up to the 7.5 kW power level.
How does the NRV110 differ from the NRV090?
The NRV110 increases centre distance from 90 to 110 mm, raising max torque from 7,306 to 9,232 N·m (26% increase) and max input power from 5.5 to 7.5 kW. Input shaft radial load capacity rises from 8,180 to 12,000 N, and the output bore increases from 35 to 42 mm.
Can the NRV110 input shaft be driven at speeds above 1400 r/min?
The NRV110 is rated for input speeds up to 1,800 r/min maximum (using 1,400 r/min as the standard reference speed). Above 1,400 r/min, derate the input power proportionally and confirm bearing L10 life is acceptable for the increased speed. Above 1,800 r/min, consult our engineering team.
Is the NRV110 suitable for crane hoist chain drive applications?
Yes. At ratios 30:1 and above, the NRV110 provides static self-locking, making it usable as the speed-reduction element in crane hoist chain drives where load-holding on power removal is required. For safety-critical crane applications, always supplement with a certified mechanical brake as required by crane design standards.
What is the output shaft keyway specification for the NRV110?
The DZ solid output shaft is 42 mm h6 with a 12×8 mm keyway (ISO 773 standard). The hollow output bore is 42 mm H7 with the same 12×8 mm keyway. Alternative keyway sizes (14×9 mm) available for non-standard sprocket hubs.
⭐ Отзывы покупателей
★★★★★
“We chain-drive four NRV110 units from a central hydraulic motor station to our warehouse overhead crane long-travel mechanisms. The 9,232 N·m output torque at ratio 60 gives smooth, powerful crane movement. Eighteen months in — zero unplanned downtime.”
Richard H. — Facilities Engineer, Manufacturing Warehouse 🇦🇺 Australia (Victoria)
★★★★★
“Our port grain unloader conveyor uses NRV110 units at ratio 80, chain-driven from diesel engines. The aluminium housings handle the coastal salt-spray environment at the port without any corrosion issues after two years of operation.”
James N. — Port Operations Engineer, Grain Export Terminal 🇦🇺 Australia (SA)
★★★★☆
“We installed eight NRV110 units on our underground mine face-conveyor chain drives. The weight saving over cast-iron units reduced the underground transport cost per unit and the self-locking at ratio 40 eliminated the need for separate backstop devices.”
Liam O. — Mining Maintenance Manager, Coal Mine 🇮🇿 New Zealand
⚙ Аксессуары и совместимые товары
⚡ Двигатели стандарта IEC (B5/B14)
Стандартные однофазные и трехфазные двигатели переменного тока с соответствующим фланцем IEC. Доступны версии для работы с частотно-регулируемым приводом.
🔗 Комплекты выходных валов
Цельнолитые (DZ), двухсторонние (SZ), с выходным фланцем (F), с полым фланцем (FL) — все с допуском H7/h6 и стандартными шпоночными пазами.
🔨 Рычаги крутящего момента
Стальные рычаги управления крутящим моментом для конфигураций с креплением на валу; опорные пластины для ориентаций B3/B6.
🔒 Комплекты уплотнений и вентиляционных отверстий
Комплекты сменных уплотнений, вентилируемые сапунные пробки и магнитные сливные пробки для увеличения интервалов между техническим обслуживанием.
Specify the EP-NRV110 for Your Chain Drive Project
Our engineers will confirm the input shaft key dimensions, allowable radial load, and output configuration for your heavy chain or belt drive application.
Он EP-NRV110 aluminium worm gear reducer features a 110 mm centre distance, ratios from 5 to 100, rated input power up to 7.5 kW, and maximum output torque of 9,232 N·m. With a solid shaft input, this large-frame shaft-input worm gearbox is the choice for high-power chain-driven crane drives, heavy mixing equipment, port conveyors, and large mining machinery where engine, hydraulic, or line-shaft power is delivered via shaft rather than an IEC motor flange.
