China Professional High Precision Nmrv Series Worm Gearbox for Tractor Worm Gear Reduction Motor gearbox design

Product Description

 

Product Parameters

Editing and broadcasting of main materials

1. Body, die-casting aluminum alloy;

2. Worm shaft, 20 Crq steel, high temperature treatment;

3. Worm gear, nickel bronze alloy;

4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;

5. Cast iron body, painted with bIu RA5571.

Regular center distance specification editing and broadcasting

Center distance: 130 (unit: mm).

Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)

Detailed Photos

 

NMRV-063-30-VS–AS-80B5-0.75KW-B3

NMRV

Means hole-input with flange

NRV

Means shaft-input without flange

063

Centre-to-centre spacing of worm-gear speed reducer

30

ratio

VS

Double input shaft

F1(FA)

Flange putput shaft

AS

Single output shaft

AB

Double output shaft

PAM

 

80B5

Motor mounting facility

0.75KW

 

B3

Mounting position

N2

NRV571

NRV030

NRV040

NRV050

NRV063

NRV075

NRV090

NRV110

NRV130

400

390

530

1571

1400

1830

2160

2390

3571

3950

250

460

620

1200

1650

2150

2520

2800

3530

4610

150

550

740

1420

1960

2450

2990

3310

4180

5470

100

630

850

1620

2250

2910

3430

3800

4790

6260

60

740

1000

1920

2660

3450

4060

4500

5680

7420

40

850

1150

2200

3050

3950

4650

5150

6500

8500

25

990

1350

2570

3570

4620

5440

6571

7600

9940

10

1350

1830

3490

4840

6270

7380

8180

10320

13500

 

 

 

 

 

 

 

 

 

 

A

50

65

84

101

120

131

162

191

203

B

38

50

64

76

95

101

122

151

163

Use and safety guarantee

1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin

Hardness: Hardened Tooth Surface
Installation: 90 Degree
Layout: Expansion
Gear Shape: Bevel Gear
Step: Single-Step
Type: Gear Reducer
Samples:
US$ 30/Piece
1 Piece(Min.Order)

|
Request Sample

nmrv gearbox

Using NMRV Gearboxes in High-Load Applications

NMRV gearboxes can be used in moderate to high-load applications, but their load capacity is generally limited compared to some other gearbox types. They are best suited for applications with light to moderate loads, such as conveyor systems, packaging equipment, and small machinery. It’s important to consider the specific load requirements and consult with gearbox manufacturers or engineers to ensure the chosen NMRV gearbox can handle the intended application’s load demands.

nmrv gearbox

Maintenance and Service of an NMRV Gearbox

Maintaining and servicing an NMRV (worm gear) gearbox is essential to ensure its proper functioning, longevity, and reliability. Here are the steps and practices involved in maintaining and servicing an NMRV gearbox:

  • Lubrication: Regularly lubricate the gearbox as per the manufacturer’s recommendations. Use the appropriate lubricant to ensure smooth operation and to reduce friction and wear between the gear components.
  • Inspection: Periodically inspect the gearbox for any signs of wear, damage, or leaks. Check for unusual noises, vibrations, or overheating during operation.
  • Cleaning: Keep the gearbox and its surrounding area clean to prevent the buildup of dirt, debris, or contaminants that could potentially affect its performance.
  • Tighten Fasteners: Check and tighten any fasteners, bolts, or screws that might have loosened due to vibrations during operation.
  • Seal Inspection: Examine the seals and gaskets for signs of wear or leakage. Replace them if necessary to prevent oil leaks or ingress of contaminants.
  • Temperature Monitoring: Monitor the operating temperature of the gearbox. Excessive heat can lead to premature wear and damage. Ensure proper ventilation and cooling if required.
  • Address Issues Promptly: If you notice any unusual behavior, noise, or performance issues with the gearbox, address them promptly. Ignoring problems can lead to more significant damage over time.
  • Replace Worn Parts: If any components, such as gears, bearings, or seals, are worn or damaged, replace them with genuine manufacturer-approved parts.
  • Professional Service: For more extensive servicing, repairs, or overhauls, consult a professional with expertise in gearbox maintenance. They can disassemble, inspect, and reassemble the gearbox accurately.

By following these maintenance and servicing practices, you can ensure that your NMRV gearbox remains in optimal condition, delivering reliable performance and an extended operational lifespan.

nmrv gearbox

Industries Using NMRV Gearboxes

NMRV gearboxes find widespread use in various industries due to their versatility and reliability. Some common industries include:

  • Food and Beverage: NMRV gearboxes are used in conveyor systems, mixers, and packaging equipment.
  • Material Handling: They are employed in conveyor belts, lifting equipment, and automated material handling systems.
  • Automation and Robotics: NMRV gearboxes play a critical role in precise motion control and positioning in robotic systems.
  • Textile: They are used in machinery for spinning, weaving, and fabric processing.
  • Pharmaceutical: NMRV gearboxes are utilized in pill coating machines, mixers, and other pharmaceutical processing equipment.
  • Agriculture: They find applications in irrigation systems, conveyor systems, and various agricultural machinery.
  • Packaging: NMRV gearboxes are used in packaging machinery to ensure controlled movement and accuracy.
  • Automotive: They are used in automated assembly lines and manufacturing processes in the automotive industry.
  • Printing: NMRV gearboxes contribute to precise movement and synchronization in printing machinery.
  • Energy: They are employed in wind turbine systems, solar tracking systems, and other renewable energy applications.

The adaptability and efficiency of NMRV gearboxes make them a preferred choice in industries that require reliable and precise power transmission solutions.

China Professional High Precision Nmrv Series Worm Gearbox for Tractor Worm Gear Reduction Motor   gearbox design		China Professional High Precision Nmrv Series Worm Gearbox for Tractor Worm Gear Reduction Motor   gearbox design
editor by CX 2023-10-18