Keterangan
EP-NMRV-E075 — IEC Flange Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NMRV-E075
| Parameter | Nilai |
|---|---|
| Seri | NMRV-E (Input Lubang dengan Flensa IEC, Poros Keluaran Ekor Arah Cacing) |
| Jarak Pusat | 075 mm |
| Rasio Pengurangan | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Daya Masukan Terukur | Up to 4.0 kW |
| Rentang Kecepatan Keluaran | 14 hingga 280 r/min (pada input 1400 r/min) |
| Torsi Keluaran Maksimum | 6,603 N·m |
| Konfigurasi Masukan | Lubang masuk dengan flensa masukan IEC + poros keluaran ekor searah ulir. |
| Flensa Input IEC | IEC flanges: 71B5, 80B5, 80B14, 90B5, 90B14, 100/112B14 |
| Poros Keluaran Ekor | Arah ulir (sejajar dengan poros ulir, ujung berlawanan) |
| Bahan Perumahan | Paduan aluminium cor |
| Bahan Roda Cacing | Perunggu fosfor |
| Bahan Poros Cacing | Baja paduan 20CrMnTi, dikeraskan permukaannya, digiling dengan presisi. |
| Diameter Lubang Keluaran | 35 mm H7 with keyway |
| Pelumasan | Oli gir ISO VG 220 (diisi dari pabrik) |
| Posisi Pemasangan | B3, B6, B7, B8, V5, V6 |
| Kelas Perlindungan | IP54 |
| Suhu Sekitar | -10°C hingga +40°C |
NMRV-E075 Performance Table (4.0 kW / 1400 r/min)
| Rasio (i) | Kecepatan Keluaran (r/min) | Torsi Keluaran (N·m) | Faktor Layanan (fs) |
|---|---|---|---|
| 7.5 | 187 | 2,785 | 1.9 |
| 10 | 140 | 3,065 | 1.5 |
| 15 | 93 | 3,509 | 1.1 |
| 20 | 70 | 3,882 | 1.1 |
| 25 | 56 | 4,273 | 1.0 |
| 30 | 47 | 4,421 | 1.0 |
| 40 | 35 | 4,865 | 1.5 |
| 50 | 28 | 5,241 | 1.2 |
| 60 | 23 | 5,569 | 1.0 |
| 80 | 18 | 5,799 | 1.9 |
| 100 | 14 | 6,603 | 1.9 |
✅ Fitur Utama & Manfaat Unik
🔗 Poros Keluaran Ekor Arah Cacing — Pembeda Utama
The defining feature of the NMRV-E075 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🌞 4 kW IEC Flange + High-Resolution Tail Shaft
At 4.0 kW, the NMRV-E075 accepts the full IEC 100/112 motor frame directly while simultaneously providing a tail shaft for high-resolution position feedback, covering the demanding requirements of servo-assisted heavy automation.
◯ Same Torque as Standard NMRV075
The NMRV-E075 delivers identical maximum output torque (6,603 N·m) to the standard NMRV075, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Encoder & Feedback Siap
Poros keluaran ekor menyediakan titik koneksi langsung untuk encoder putar, tachogenerator, dan generator pulsa yang memantau kecepatan poros cacing dalam sistem kontrol gerak loop tertutup, sehingga menghilangkan braket encoder eksternal dan perangkat keras kopling.
🚫 IP54 — Integritas Segel Ganda
Baik lubang keluaran utama maupun lubang keluar poros ekor disegel dengan segel bibir kontak ganda, mempertahankan perlindungan IP54 di semua orientasi pemasangan tanpa kebocoran oli pada antarmuka poros mana pun.
🏭 Skenario Aplikasi
🌿 Heavy Agricultural Monitoring
High-torque NMRV-E075 worm gearbox for heavy auger and elevator drives where the tail shaft mounts a rotation sensor confirming grain flow in real time and triggering an alarm if the auger jams.
💧 Mixing Tank Level-Speed Control
Worm gear reducer with tail output shaft for industrial mixing tanks where a tail-shaft encoder feeds back to a variable-frequency controller, maintaining constant tip-speed regardless of fluid viscosity.
🏗 Construction Material Monitoring
Aluminium worm gearbox with tail shaft for concrete mixer and aggregate conveyor drives where the tail-shaft tachometer provides real-time rotation monitoring to the plant SCADA system.
⚙ Servo-Assisted Automation
NMRV-E075 worm gearbox tail shaft for servo-assisted positioning stages where the tail encoder provides position feedback in semi-closed loop control, reducing servo drive cost versus full servo gearbox solutions.
🔎 Panduan Seleksi
Worked Example — Auger Jam Detection
Required: NMRV-E075 at i=40 driving a grain auger at 35 r/min with SCADA rotation monitoring. Output torque from table = 4,865 N·m. Motor: 3.0 kW, IEC 100/112B14. Tail shaft: rotation sensor, 35 mm bore. ✅ NMRV-E075-40-100/112B14 selected.
⚖ NMRV-E075 vs Standard NMRV075
| Fitur | EP-NMRV-E075 (with Tail Shaft) | EP-NMRV075 (Standard) |
|---|---|---|
| Poros Keluaran Ekor | ✅ Ya — arah cacing | TIDAK |
| Pemasangan Encoder / Umpan Balik | Langsung pada poros ekor | Membutuhkan braket eksternal |
| Penggerak Beban Ganda | Ya — utama + ekor | Tidak — hanya keluaran tunggal |
| Torsi Keluaran Utama | 6,603 N·m | 6,603 N·m |
| Dimensi Perumahan | Sedikit lebih panjang (tonjolan batang ekor) | Panjang standar |
| Input Flensa IEC | Ya — standar | Ya — standar |
NMRV-E075 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Alur kunci |
|---|---|---|---|---|---|---|
| 120 | 123 | 192 | 247 | 8 | 28 | M10 |
❓ Pertanyaan yang Sering Diajukan
What is the tail output shaft on the EP-NMRV-E075 and what is it used for?
The tail output shaft on the NMRV-E075 is a secondary shaft extending in the worm-direction axis (co-axial with the worm shaft, opposite end). It is used to mount rotary encoders, tachogenerators, or pulse generators for speed/position feedback, or to drive a small auxiliary load such as a lubrication pump, cooling fan, or pilot valve simultaneously with the main output drive.
Does the tail shaft affect the main output torque of the NMRV-E075?
No. The tail shaft is driven directly off the worm shaft end and carries only the small torque required for the encoder or auxiliary device. The main output bore delivers the full rated 6,603 N·m, identical to the standard NMRV075.
What encoder types are compatible with the NMRV-E075 tail output shaft?
Poros ekor adalah poros berpasak standar yang dapat menerima encoder putar inkremental atau absolut apa pun dengan ukuran lubang yang sesuai. Pilihan umum meliputi encoder inkremental 5–24V (100–10.000 PPR), encoder absolut SSI, dan perangkat umpan balik tipe resolver. Konfirmasikan dimensi lubang dan pasak encoder dengan pemasok encoder sebelum memesan.
Which IEC motor flanges are available for the EP-NMRV-E075?
The NMRV-E075 accepts the following IEC input flanges: 71B5, 80B5, 80B14, 90B5, 90B14, 100/112B14. This covers the standard motor frame range for the 4.0 kW power class. Servo and stepper motor adaptor plates available on request.
Can the NMRV-E075 tail shaft be used to drive a secondary load simultaneously?
Ya, asalkan torsi beban sekunder pada poros ekor tidak melebihi kapasitas torsi tambahan poros cacing. Untuk beban sekunder ringan seperti pompa pelumasan kecil (di bawah 0,05 kW) atau katup pilot, poros ekor dapat digunakan secara bersamaan tanpa memengaruhi kinerja keluaran utama. Konsultasikan dengan tim teknik kami untuk beban sekunder di atas 0,05 kW.
⭐ Ulasan Pelanggan
★★★★★
“We installed NMRV-E075 on our heavy auger drive with a tail-shaft rotation sensor feeding our SCADA system. During harvest, we receive real-time confirmation that the auger is turning and immediate notification if it jams. Excellent peace of mind.”
Ian M. — Operations Manager, Grain Facility 🇦🇺 Australia (SA)
★★★★★
“The NMRV-E075 with tail-shaft encoder drives our concrete mixer feed conveyor. The speed feedback to our batching computer maintains accurate aggregate dosing across different mix designs. Concrete quality consistency has improved markedly.”
Tony B. — Plant Manager, Ready-Mix Concrete 🇦🇺 Australia (QLD)
★★★★☆
“We use NMRV-E075 on our chemical mixing tank agitator. The tail shaft tachogenerator monitors worm shaft speed and feeds back to our DCS. We now detect agitator stall in high-viscosity batches before the motor trips, avoiding product losses.”
Sophie M. — Chemical Process Engineer 🇫🇷 France
⚙ Aksesoris & Produk yang Kompatibel
⚡ Motor IEC (B5/B14)
Motor AC standar dengan flensa IEC yang sesuai. Tersedia versi inverter VFD untuk kontrol kecepatan variabel.
🔗 Kit Poros Output
Padat tunggal (DZ), ujung ganda (SZ), flensa keluaran (F), flensa berongga (FL) — semuanya dengan toleransi H7/h6 dan alur pasak standar.
🔨 Lengan dan Braket Torsi
Lengan penahan torsi baja untuk konfigurasi pemasangan poros; pelat pemasangan kaki untuk orientasi B3/B6.
🔒 Kit Segel & Ventilasi
Kit pengganti seal bibir, sumbat ventilasi, dan sumbat pembuangan magnetik untuk interval servis yang lebih panjang.
Specify the EP-NMRV-E075
Our team will confirm the IEC flange, ratio, and encoder shaft specification for your high-torque closed-loop industrial or agricultural drive.
Itu EP-NMRV-E075 aluminium worm gearbox combines the bore-input IEC flange convenience of the NMRV075 with an additional worm-direction tail output shaft. Centre distance 075 mm, ratios 5 to 100, input power up to 4.0 kW, max output torque 6,603 N·m. The tail shaft enables simultaneous encoder feedback, tachometer monitoring, or auxiliary drive — the perfect instrumented worm gearbox for closed-loop automation, precision conveyor control, and SCADA-integrated industrial drives.
