Descrição
EP-NMRV-E075 — IEC Flange Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NMRV-E075
| Parâmetro | Valor |
|---|---|
| Série | NMRV-E (Bore Input with IEC Flange, Worm-Direction Tail Output Shaft) |
| Distância do centro | 075 mm |
| Taxas de redução | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Potência de entrada nominal | Up to 4.0 kW |
| Faixa de velocidade de saída | 14 a 280 rpm (com entrada de 1400 rpm) |
| Torque máximo de saída | 6,603 N·m |
| Configuração de entrada | Bore input with IEC input flange + worm-direction tail output shaft |
| Flanges de entrada IEC | IEC flanges: 71B5, 80B5, 80B14, 90B5, 90B14, 100/112B14 |
| Eixo de saída da cauda | Direção do parafuso sem-fim (coaxial com o eixo do parafuso sem-fim, extremidade oposta) |
| Material de construção | Liga de alumínio fundido |
| Material da roda sem-fim | Bronze fosforoso |
| Material do eixo sem-fim | Aço liga 20CrMnTi, cementado, retificado com precisão |
| Diâmetro do furo de saída | 35 mm H7 with keyway |
| Lubrificação | Óleo de engrenagem ISO VG 220 (adicionado de fábrica) |
| Posições de montagem | B3, B6, B7, B8, V5, V6 |
| Classe de proteção | IP54 |
| Temperatura ambiente | -10°C a +40°C |
NMRV-E075 Performance Table (4.0 kW / 1400 r/min)
| Razão (i) | Velocidade de saída (rpm) | Torque de saída (N·m) | Fator de serviço (fs) |
|---|---|---|---|
| 7.5 | 187 | 2,785 | 1.9 |
| 10 | 140 | 3,065 | 1.5 |
| 15 | 93 | 3,509 | 1.1 |
| 20 | 70 | 3,882 | 1.1 |
| 25 | 56 | 4,273 | 1.0 |
| 30 | 47 | 4,421 | 1.0 |
| 40 | 35 | 4,865 | 1.5 |
| 50 | 28 | 5,241 | 1.2 |
| 60 | 23 | 5,569 | 1.0 |
| 80 | 18 | 5,799 | 1.9 |
| 100 | 14 | 6,603 | 1.9 |
✅ Principais funcionalidades e benefícios exclusivos
🔗 Eixo de saída com rotação helicoidal — O principal diferencial
The defining feature of the NMRV-E075 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🌞 4 kW IEC Flange + High-Resolution Tail Shaft
At 4.0 kW, the NMRV-E075 accepts the full IEC 100/112 motor frame directly while simultaneously providing a tail shaft for high-resolution position feedback, covering the demanding requirements of servo-assisted heavy automation.
◯ Same Torque as Standard NMRV075
The NMRV-E075 delivers identical maximum output torque (6,603 N·m) to the standard NMRV075, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Pronto para Encoder e Feedback
O eixo de saída traseiro fornece um ponto de conexão direta para encoders rotativos, tacogeradores e geradores de pulsos que monitoram a velocidade do eixo sem-fim em sistemas de controle de movimento de circuito fechado, eliminando suportes de encoder externos e componentes de acoplamento.
🚫 IP54 — Integridade com Vedação Dupla
Tanto o furo de saída principal quanto a saída do eixo de cauda são vedados com vedações labiais de contato duplo, mantendo a proteção IP54 em todas as orientações de montagem, sem vazamento de óleo em nenhuma das interfaces do eixo.
🏭 Cenários de Aplicação
🌿 Heavy Agricultural Monitoring
High-torque NMRV-E075 worm gearbox for heavy auger and elevator drives where the tail shaft mounts a rotation sensor confirming grain flow in real time and triggering an alarm if the auger jams.
💧 Mixing Tank Level-Speed Control
Worm gear reducer with tail output shaft for industrial mixing tanks where a tail-shaft encoder feeds back to a variable-frequency controller, maintaining constant tip-speed regardless of fluid viscosity.
🏗 Construction Material Monitoring
Aluminium worm gearbox with tail shaft for concrete mixer and aggregate conveyor drives where the tail-shaft tachometer provides real-time rotation monitoring to the plant SCADA system.
⚙ Servo-Assisted Automation
NMRV-E075 worm gearbox tail shaft for servo-assisted positioning stages where the tail encoder provides position feedback in semi-closed loop control, reducing servo drive cost versus full servo gearbox solutions.
🔎 Guia de Seleção
Worked Example — Auger Jam Detection
Required: NMRV-E075 at i=40 driving a grain auger at 35 r/min with SCADA rotation monitoring. Output torque from table = 4,865 N·m. Motor: 3.0 kW, IEC 100/112B14. Tail shaft: rotation sensor, 35 mm bore. ✅ NMRV-E075-40-100/112B14 selected.
⚖ NMRV-E075 vs Standard NMRV075
| Recurso | EP-NMRV-E075 (with Tail Shaft) | EP-NMRV075 (Standard) |
|---|---|---|
| Eixo de saída da cauda | ✅ Sim — direção da minhoca | Não |
| Montagem do codificador/feedback | Diretamente no eixo da cauda | Requer suporte externo |
| Acionamento de carga dupla | Sim — principal + cauda | Não — apenas uma saída |
| Torque de saída principal | 6,603 N·m | 6,603 N·m |
| Dimensões da Habitação | Ligeiramente mais comprido (protrusão da haste caudal) | Comprimento padrão |
| IEC Flange Input | Yes — standard | Yes — standard |
NMRV-E075 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Chaveta |
|---|---|---|---|---|---|---|
| 120 | 123 | 192 | 247 | 8 | 28 | M10 |
❓ Perguntas Frequentes
What is the tail output shaft on the EP-NMRV-E075 and what is it used for?
The tail output shaft on the NMRV-E075 is a secondary shaft extending in the worm-direction axis (co-axial with the worm shaft, opposite end). It is used to mount rotary encoders, tachogenerators, or pulse generators for speed/position feedback, or to drive a small auxiliary load such as a lubrication pump, cooling fan, or pilot valve simultaneously with the main output drive.
Does the tail shaft affect the main output torque of the NMRV-E075?
No. The tail shaft is driven directly off the worm shaft end and carries only the small torque required for the encoder or auxiliary device. The main output bore delivers the full rated 6,603 N·m, identical to the standard NMRV075.
What encoder types are compatible with the NMRV-E075 tail output shaft?
The tail shaft is a standard keyed shaft accepting any incremental or absolute rotary encoder with the matching bore size. Common options include 5–24V incremental encoders (100–10,000 PPR), SSI absolute encoders, and resolver-type feedback devices. Confirm the encoder bore and key dimensions with the encoder supplier before ordering.
Which IEC motor flanges are available for the EP-NMRV-E075?
The NMRV-E075 accepts the following IEC input flanges: 71B5, 80B5, 80B14, 90B5, 90B14, 100/112B14. This covers the standard motor frame range for the 4.0 kW power class. Servo and stepper motor adaptor plates available on request.
Can the NMRV-E075 tail shaft be used to drive a secondary load simultaneously?
Yes, provided the secondary load torque on the tail shaft does not exceed the worm shaft’s additional torque capacity. For light-duty secondary loads such as small lubrication pumps (below 0.05 kW) or pilot valves, the tail shaft can be used simultaneously without affecting main output performance. Consult our engineering team for secondary loads above 0.05 kW.
⭐ Avaliações de clientes
★★★★★
“We installed NMRV-E075 on our heavy auger drive with a tail-shaft rotation sensor feeding our SCADA system. During harvest, we receive real-time confirmation that the auger is turning and immediate notification if it jams. Excellent peace of mind.”
Ian M. — Operations Manager, Grain Facility 🇦🇺 Australia (SA)
★★★★★
“The NMRV-E075 with tail-shaft encoder drives our concrete mixer feed conveyor. The speed feedback to our batching computer maintains accurate aggregate dosing across different mix designs. Concrete quality consistency has improved markedly.”
Tony B. — Plant Manager, Ready-Mix Concrete 🇦🇺 Australia (QLD)
★★★★☆
“We use NMRV-E075 on our chemical mixing tank agitator. The tail shaft tachogenerator monitors worm shaft speed and feeds back to our DCS. We now detect agitator stall in high-viscosity batches before the motor trips, avoiding product losses.”
Sophie M. — Chemical Process Engineer 🇫🇷 France
⚙ Acessórios e Produtos Compatíveis
⚡ Motores IEC (B5/B14)
Motores CA padrão com flange IEC compatível. Versões para inversores VFD disponíveis para controle de velocidade variável.
🔗 Kits de Eixo de Saída
Simples sólido (DZ), duplo (SZ), flange de saída (F), flange oco (FL) — todos com tolerância H7/h6 e rasgos de chaveta padrão.
🔨 Braços e suportes de torque
Braços de reação de torque em aço para configurações de montagem em eixo; placas de montagem com pés para orientações B3/B6.
🔒 Kits de Vedação e Respiro
Kits de vedação labial de reposição, bujões de respiro ventilados e bujões de drenagem magnéticos para intervalos de manutenção prolongados.
Specify the EP-NMRV-E075
Our team will confirm the IEC flange, ratio, and encoder shaft specification for your high-torque closed-loop industrial or agricultural drive.
O EP-NMRV-E075 aluminium worm gearbox combines the bore-input IEC flange convenience of the NMRV075 with an additional worm-direction tail output shaft. Centre distance 075 mm, ratios 5 to 100, input power up to 4.0 kW, max output torque 6,603 N·m. The tail shaft enables simultaneous encoder feedback, tachometer monitoring, or auxiliary drive — the perfect instrumented worm gearbox for closed-loop automation, precision conveyor control, and SCADA-integrated industrial drives.
