Keterangan
EP-NRV-E090 — Shaft-Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NRV-E090
| Parameter | Nilai |
|---|---|
| Seri | NRV-E (Solid Shaft Input, No Flange, Worm-Direction Tail Output Shaft) |
| Jarak Pusat | 090 mm |
| Rasio Pengurangan | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Daya Masukan Terukur | Up to 5.5 kW |
| Rentang Kecepatan Keluaran | 14 hingga 280 r/min (pada input 1400 r/min) |
| Torsi Keluaran Maksimum | 7,306 N·m |
| Konfigurasi Masukan | Solid shaft input (no IEC flange) + worm-direction tail output shaft |
| Poros Masukan | Solid keyed shaft input |
| Poros Keluaran Ekor | Arah ulir (sejajar dengan poros ulir, ujung berlawanan) |
| Bahan Perumahan | Paduan aluminium cor |
| Bahan Roda Cacing | Perunggu fosfor |
| Bahan Poros Cacing | Baja paduan 20CrMnTi, dikeraskan permukaannya, digiling dengan presisi. |
| Diameter Lubang Keluaran | 35 mm H7 with keyway |
| Pelumasan | Oli gir ISO VG 220 (diisi dari pabrik) |
| Posisi Pemasangan | B3, B6, B7, B8, V5, V6 |
| Kelas Perlindungan | IP54 |
| Suhu Sekitar | -10°C hingga +40°C |
NRV-E090 Performance Table (5.5 kW / 1400 r/min)
| Rasio (i) | Kecepatan Keluaran (r/min) | Torsi Keluaran (N·m) | Faktor Layanan (fs) |
|---|---|---|---|
| 7.5 | 187 | 2,785 | 1.9 |
| 10 | 140 | 3,065 | 1.5 |
| 15 | 93 | 3,882 | 1.2 |
| 20 | 70 | 4,273 | 1.1 |
| 25 | 56 | 4,603 | 1.1 |
| 30 | 47 | 4,891 | 1.2 |
| 40 | 35 | 5,383 | 1.5 |
| 50 | 28 | 5,799 | 1.4 |
| 60 | 23 | 6,163 | 1.2 |
| 80 | 18 | 6,783 | 1.1 |
| 100 | 14 | 7,306 | 0.9 |
✅ Fitur Utama & Manfaat Unik
🔗 Poros Keluaran Ekor Arah Cacing — Pembeda Utama
The defining feature of the NRV-E090 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🍲 Mine-Safe Chain Drive + Safety Interlock
The NRV-E090 is purpose-built for instrumented mining conveyor chain drives where the solid shaft input handles engine or hydraulic motor chain pull and the tail shaft provides safety PLC rotation interlock signals.
◯ Same Torque as Standard NRV090
The NRV-E090 delivers identical maximum output torque (7,306 N·m) to the standard NRV090, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Encoder & Feedback Siap
Poros keluaran ekor menyediakan titik koneksi langsung untuk encoder putar, tachogenerator, dan generator pulsa yang memantau kecepatan poros cacing dalam sistem kontrol gerak loop tertutup, sehingga menghilangkan braket encoder eksternal dan perangkat keras kopling.
🚫 IP54 — Integritas Segel Ganda
Baik lubang keluaran utama maupun lubang keluar poros ekor disegel dengan segel bibir kontak ganda, mempertahankan perlindungan IP54 di semua orientasi pemasangan tanpa kebocoran oli pada antarmuka poros mana pun.
🏭 Skenario Aplikasi
💧 Sludge Thickener Rotation Monitoring
Heavy industrial NMRV-E090 worm gearbox for municipal sludge thickeners where the tail shaft provides continuous rotation confirmation to the SCADA system, alerting operators instantly to rake stall events.
⚙ Chemical Reactor Feedback Drive
High-torque worm gear reducer with tail output shaft for chemical reactor agitator drives where the tail shaft encoder monitors worm shaft speed and feeds back to a process control system.
🍲 Mining Conveyor Instrumentation
Aluminium worm gearbox with tail shaft for underground mining conveyor take-up drives where the tail-mounted tachometer provides belt-speed data to the mine-wide monitoring and safety system.
📥 Port Conveyor Supervision
Corrosion-resistant worm gearmotor with tail shaft for port bulk material conveyor drives where the tail shaft speed signal confirms conveyor motion to the port operations control room.
🔎 Panduan Seleksi
Worked Example — Mine Safety Interlock
Required: NRV-E090 at i=60, chain-driven from 5.5 kW engine at 1400 r/min, tail shaft to mine safety PLC. Output speed = 23 r/min, torque = 6,163 N·m. Tail shaft: safety encoder, 35 mm bore. ✅ NRV-E090-60 selected.
⚖ NRV-E090 vs Standard NRV090
| Fitur | EP-NRV-E090 (with Tail Shaft) | EP-NRV090 (Standard) |
|---|---|---|
| Poros Keluaran Ekor | ✅ Ya — arah cacing | TIDAK |
| Pemasangan Encoder / Umpan Balik | Langsung pada poros ekor | Membutuhkan braket eksternal |
| Penggerak Beban Ganda | Ya — utama + ekor | Tidak — hanya keluaran tunggal |
| Torsi Keluaran Utama | 7,306 N·m | 7,306 N·m |
| Dimensi Perumahan | Sedikit lebih panjang (tonjolan batang ekor) | Panjang standar |
| Shaft Input | Yes — solid keyed shaft | Yes — solid keyed shaft |
NRV-E090 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Alur kunci |
|---|---|---|---|---|---|---|
| 140 | 154 | 234 | 309 | 10 | 35 | M12 |
❓ Pertanyaan yang Sering Diajukan
What is the tail output shaft on the EP-NRV-E090 and how is it different from the main output?
The tail shaft on the NRV-E090 exits the housing in the worm-direction axis (opposite end of the worm shaft), while the main output bore is perpendicular (90 degrees) to the worm axis. The tail shaft is driven off the worm shaft end and is used for encoder mounting, tachometer connection, or light auxiliary drive, while the main output delivers the full 7,306 N·m load torque.
Does the tail shaft reduce the main output torque of the NRV-E090?
No. The tail shaft draws only the small torque needed for its connected device. The main output retains the full 7,306 N·m rating, identical to the standard NRV090.
What is the input shaft specification for the NRV-E090?
The NRV-E090 has a solid keyed input shaft (no IEC flange). The shaft diameter matches the equivalent NMRV090 bore input diameter. It accepts chain sprockets, belt pulleys, and rigid couplings. A bilateral (double-ended) input shaft is standard; single-end configuration available on request.
What encoder types can be mounted on the NRV-E090 tail shaft?
Any standard keyed rotary encoder with the matching bore diameter can be mounted on the NRV-E090 tail shaft: incremental (5V–24V, 100–10,000 PPR), SSI absolute, or resolver-type. Confirm the encoder bore size and keyway before ordering. The tail shaft key dimensions match the catalogue DZ shaft specification for NMRV-E090.
Can the NRV-E090 be used for closed-loop speed control in a chain-driven system?
Yes. The NRV-E090 is the ideal solution for chain-driven systems requiring closed-loop speed feedback. The chain drives the solid input shaft; the main output drives the load; and the tail shaft mounts an encoder that feeds speed/position data back to the controller. This eliminates the need for a separate encoder mounting bracket or a second independent encoder drive arrangement.
⭐ Ulasan Pelanggan
★★★★★
“Our underground mine conveyor NRV-E090 units have tail-shaft rotation sensors integrated into our mine safety PLC. The sensors provide emergency-stop interlock signals when belt motion is lost. Exactly the safety integration we needed for underground compliance.”
Steve K. — Mining Engineer, Coal Mine 🇦🇺 Australia (NSW)
★★★★★
“The NRV-E090 drives our wastewater sludge scraper chain mechanism and the tail shaft pulse counter integrates into our SCADA for remote monitoring. Three years of continuous operation in hydrogen-sulphide atmosphere without corrosion or seal issues.”
Anita R. — Plant Manager, Water Authority 🇮🇿 New Zealand
★★★★☆
“We chain-drive NRV-E090 units on our quarry aggregate conveyor and use the tail-shaft tachometers for belt speed monitoring in our conveyor control system. The belt management system has reduced conveyor-related stoppages by 35% since installation.”
Rob C. — Operations Director, Aggregate Quarry 🇫🇯 Finland
⚙ Aksesoris & Produk yang Kompatibel
⚡ Motor IEC (B5/B14)
Motor AC standar dengan flensa IEC yang sesuai. Tersedia versi inverter VFD untuk kontrol kecepatan variabel.
🔗 Kit Poros Output
Padat tunggal (DZ), ujung ganda (SZ), flensa keluaran (F), flensa berongga (FL) — semuanya dengan toleransi H7/h6 dan alur pasak standar.
🔨 Lengan dan Braket Torsi
Lengan penahan torsi baja untuk konfigurasi pemasangan poros; pelat pemasangan kaki untuk orientasi B3/B6.
🔒 Kit Segel & Ventilasi
Kit pengganti seal bibir, sumbat ventilasi, dan sumbat pembuangan magnetik untuk interval servis yang lebih panjang.
Request a Quote for EP-NRV-E090
Our engineering team will confirm the input shaft, ratio, and safety encoder specification for your chain-driven mining or industrial instrumented drive.
Itu EP-NRV-E090 aluminium worm gearbox combines a solid shaft input (no IEC flange) with an additional worm-direction tail output shaft. Centre distance 090 mm, ratios 5 to 100, input power up to 5.5 kW, max output torque 7,306 N·m. The tail shaft enables simultaneous encoder feedback, safety interlock monitoring, or auxiliary drive — the ideal instrumented shaft-input worm gearbox for chain-driven closed-loop agricultural, industrial, and mining drive systems.
