Descrizione
EP-NMRV-E050 — IEC Flange Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NMRV-E050
| Parametro | Valore |
|---|---|
| Serie | NMRV-E (Bore Input with IEC Flange, Worm-Direction Tail Output Shaft) |
| Distanza dal centro | 050 mm |
| Rapporti di riduzione | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Potenza di ingresso valutata | Up to 1.1 kW |
| Gamma di velocità di uscita | Da 14 a 280 giri/min (con una velocità di ingresso di 1400 giri/min) |
| Coppia massima in uscita | 4,280 N·m |
| Configurazione di input | Bore input with IEC input flange + worm-direction tail output shaft |
| IEC Input Flanges | IEC flanges: 63B5, 63B14, 71B5, 71B14, 80B14 |
| Albero di uscita posteriore | Direzione di avvolgimento della vite senza fine (coassiale con l'albero della vite senza fine, estremità opposta) |
| Materiale per alloggi | lega di alluminio pressofusa |
| Materiale della ruota a vite senza fine | bronzo fosforoso |
| Materiale dell'albero a vite senza fine | Acciaio legato 20CrMnTi, cementato, rettificato di precisione |
| Diametro del foro di uscita | 25 mm H7 with keyway |
| Lubrificazione | Olio per ingranaggi ISO VG 220 (riempito in fabbrica) |
| Posizioni di montaggio | B3, B6, B7, B8, V5, V6 |
| Classe di protezione | IP54 |
| Temperatura ambiente | da -10 °C a +40 °C |
NMRV-E050 Performance Table (1.1 kW / 1400 r/min)
| Rapporto (i) | Velocità di uscita (giri/min) | Coppia in uscita (N·m) | Fattore di servizio (fs) |
|---|---|---|---|
| 7.5 | 187 | 683 | 2.3 |
| 10 | 140 | 752 | 1.8 |
| 15 | 93 | 861 | 1.3 |
| 20 | 70 | 948 | 1.0 |
| 30 | 47 | 1,085 | 1.0 |
| 40 | 35 | 2,475 | 2.1 |
| 50 | 28 | 2,865 | 2.3 |
| 60 | 23 | 3,153 | 1.7 |
| 80 | 18 | 3,610 | 1.6 |
| 100 | 14 | 4,280 | 1.4 |
✅ Caratteristiche principali e vantaggi esclusivi
🔗 Albero di uscita posteriore a vite senza fine: l'elemento distintivo fondamentale
The defining feature of the NMRV-E050 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🅆 VFD + Encoder in One Unit
The NMRV-E050 works seamlessly with VFD-driven IEC motors while the tail shaft simultaneously provides speed/position feedback, creating a closed-loop VFD-gearbox-encoder assembly without external sensor brackets.
◯ Same Torque as Standard NMRV050
The NMRV-E050 delivers identical maximum output torque (4,280 N·m) to the standard NMRV050, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Codificatore e feedback pronti
L'albero di uscita posteriore fornisce un punto di connessione diretto per encoder rotativi, tachigeneratori e generatori di impulsi che monitorano la velocità dell'albero a vite senza fine nei sistemi di controllo del movimento a circuito chiuso, eliminando staffe per encoder esterne e componenti di accoppiamento.
🚫 IP54 — Integrità a doppia guarnizione
Sia l'alesaggio di uscita principale che l'uscita dell'albero di coda sono sigillati con guarnizioni a labbro a doppio contatto, mantenendo la protezione IP54 in tutte le configurazioni di montaggio senza perdite d'olio in corrispondenza delle interfacce dell'albero.
🏭 Scenari applicativi
🚮 Closed-Loop Conveyor Control
NMRV-E050 worm gearbox for heavy conveyor drives where the tail shaft mounts a tachogenerator providing speed feedback to a VFD controller, enabling precise belt speed regulation under variable load.
⚙ Industrial Mixer Monitoring
Heavy-duty worm gear reducer with tail output shaft for industrial mixer drives where the tail shaft speed signal monitors worm shaft rotation, detecting stall conditions in high-viscosity batches.
💧 Water Treatment Instrumented Drives
Aluminium worm gearbox with tail shaft for slow-speed filter screen and sludge scraper drives where a tail-mounted pulse counter provides the operations team with real-time rotation confirmation.
📦 Print Line Register Control
Worm gear reduction gearbox with tail output for gravure printing press section drives where the tail shaft encoder provides master-line speed reference for digital register control systems.
🔎 Guida alla selezione
Worked Example — Industrial Mixer with VFD
Required: NMRV-E050 at i=50 driving a mixer at 28 r/min with tachometer feedback to VFD. Output torque from table = 2,865 N·m. Motor: 0.75 kW, IEC 80B14. Tail shaft: tachogenerator, 25 mm bore. ✅ NMRV-E050-50-80B14 selected.
⚖ NMRV-E050 vs Standard NMRV050
| Caratteristica | EP-NMRV-E050 (with Tail Shaft) | EP-NMRV050 (Standard) |
|---|---|---|
| Albero di uscita posteriore | ✅ Sì — direzione del verme | NO |
| Montaggio encoder/feedback | Direttamente sull'albero di coda | Richiede una staffa esterna |
| Azionamento a doppio carico | Sì — principale + coda | No, solo uscita singola |
| Coppia di uscita principale | 4,280 N·m | 4,280 N·m |
| Dimensioni dell'abitazione | Leggermente più lungo (sporgenza dell'albero di coda) | Lunghezza standard |
| IEC Flange Input | Yes — standard | Yes — standard |
NMRV-E050 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Keyway |
|---|---|---|---|---|---|---|
| 92 | 99 | 153 | 199 | 8 | 25 | M10 |
❓ Domande frequenti
What is the tail output shaft on the EP-NMRV-E050 and what is it used for?
The tail output shaft on the NMRV-E050 is a secondary shaft extending in the worm-direction axis (co-axial with the worm shaft, opposite end). It is used to mount rotary encoders, tachogenerators, or pulse generators for speed/position feedback, or to drive a small auxiliary load such as a lubrication pump, cooling fan, or pilot valve simultaneously with the main output drive.
Does the tail shaft affect the main output torque of the NMRV-E050?
No. The tail shaft is driven directly off the worm shaft end and carries only the small torque required for the encoder or auxiliary device. The main output bore delivers the full rated 4,280 N·m, identical to the standard NMRV050.
What encoder types are compatible with the NMRV-E050 tail output shaft?
The tail shaft is a standard keyed shaft accepting any incremental or absolute rotary encoder with the matching bore size. Common options include 5–24V incremental encoders (100–10,000 PPR), SSI absolute encoders, and resolver-type feedback devices. Confirm the encoder bore and key dimensions with the encoder supplier before ordering.
Which IEC motor flanges are available for the EP-NMRV-E050?
The NMRV-E050 accepts the following IEC input flanges: 63B5, 63B14, 71B5, 71B14, 80B14. This covers the standard motor frame range for the 1.1 kW power class. Servo and stepper motor adaptor plates available on request.
Can the NMRV-E050 tail shaft be used to drive a secondary load simultaneously?
Yes, provided the secondary load torque on the tail shaft does not exceed the worm shaft’s additional torque capacity. For light-duty secondary loads such as small lubrication pumps (below 0.05 kW) or pilot valves, the tail shaft can be used simultaneously without affecting main output performance. Consult our engineering team for secondary loads above 0.05 kW.
⭐ Recensioni dei clienti
★★★★★
“Our industrial mixer uses an NMRV-E050 with a tail-shaft tachometer. The tachometer signal feeds our VFD controller and maintains constant impeller tip-speed across varying product viscosities. Mixing uniformity has improved significantly.”
Rosa K. — Process Engineer, Food Ingredients 🇳🇿 New Zealand
★★★★★
“We installed NMRV-E050 units on our wastewater filter screen drives. The tail-shaft pulse counters feed our SCADA system, providing operators with real-time rotation confirmation and instant stall alerts. Highly reliable after 18 months.”
Carlos M. — Plant Manager, Water Treatment Authority 🇨🇱 Chile
★★★★☆
“The NMRV-E050 runs our print-line register control system. The tail shaft provides the master speed reference for our digital register system and print registration errors have been eliminated on fine-screen jobs.”
Michael T. — Production Manager, Print House 🇦🇺 Australia (NSW)
⚙ Accessori e prodotti compatibili
⚡ Motori IEC (B5/B14)
Motori CA standard con flangia IEC compatibile. Sono disponibili versioni per inverter VFD per il controllo della velocità variabile.
🔗 Kit albero di uscita
Monoblocco pieno (DZ), a doppia estremità (SZ), flangia di uscita (F), flangia cava (FL) — tutte con tolleranza H7/h6 e scanalature per chiavetta standard.
🔨 Bracci e staffe di torsione
Bracci di reazione di coppia in acciaio per configurazioni con montaggio su albero; piastre di fissaggio per orientamenti B3/B6.
🔒 Kit di guarnizioni e sfiati
Kit di guarnizioni di ricambio, tappi di sfiato e tappi di scarico magnetici per intervalli di manutenzione prolungati.
Enquire About EP-NMRV-E050
Our team will confirm the IEC flange, VFD motor compatibility, and encoder specification for your closed-loop industrial drive application.
IL EP-NMRV-E050 aluminium worm gearbox combines the bore-input IEC flange convenience of the NMRV050 with an additional worm-direction tail output shaft. Centre distance 050 mm, ratios 5 to 100, input power up to 1.1 kW, max output torque 4,280 N·m. The tail shaft enables simultaneous encoder feedback, tachometer monitoring, or auxiliary drive — the perfect instrumented worm gearbox for closed-loop automation, precision conveyor control, and SCADA-integrated industrial drives.
