Provider & Quality controlWe offer in depth drawings and offer anytime necessary. At any time-Electricity Group CO., LTD. IS Expert IN Producing ALL Sorts OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Equipment Pace REDUCERS, PARALLEL SHAFT HELICAL Equipment REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Gear REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Vehicle GEARBOXES, PTO Generate SHAFTS, Unique REDUCER & Relevant Equipment Factors AND OTHER Connected Goods, SPROCKETS, HYDRAULIC System, VACCUM PUMPS, FLUID COUPLING, Equipment RACKS, CHAINS, TIMING PULLEYS, UDL Pace VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Equipment PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Lower BACKLASH WORM REDUCERS AND SO ON. EPG was awarded with “popular merchandise of Zhejiang Province” and “famous brand of Zhejiang Province”.
15m Diameter Large Cast Girth Ring EPT for Ball Mill/Rotary Kiln
EPTT amp forging potential
CITICHL is the casting amp forging cEPTTr in central-south EPTT, possessing 50t electric arc furnace, 60t EPTT ladle refining furnace, and 60t VD/VOD refining furnace, and so on. We can pour 350t liquid metal one particular time and yields far more than 200,000t of higher quality liquid metal and can create the higher quality metal of a lot more than 260 metal grades such as carbon steel, structural alloy metal and the structural steel, refractory metal and stainless steel of EPTT requirement. The maXiHu (West EPT) Dis.mum weigEPTT of casting, gray casting, graphite cast iron and non-ferrous casting is 200t, 30t, 20t and 205t separately.
The business is the forging cEPTTr in central-south EPTT. It is very EPTTful in forging. The single cost-free forging is 100t(max bodyweight). We can roll rings of diverse EPTs of carbon steel, alloy metal, substantial temperature alloy and non-ferrous alloEPTTsuch as copper alloy, EPT alloy and EPTTium alloy. The maXiHu (West EPT) Dis.mum diameter is five.5m and one piece of the forging weighs 10t. We have 8400t, 3150t, 1600t, water press and Raw 200/a hundred and sixty-5000/750 massive-measurement ring mill of higher precision in Asia made in WAGNER, Germany.
Warmth treatment method ability
The company is the warmth remedy foundation in national EPTTry trade in central and south EPTT, possessing Phi3 times1.6m carburizing furnace, Phi2.3 times17m, Phi2.three times9.5m shaft furnace, eight.five times13m,five times15m,6 times14.5m,four.five times18m automatic managed car variety heat therapy furnace team. We can offer the quenched and tempered element over 45t, the carburizedand quenched EPT and pinion underneath 20t, shaft le5.7m in length and the induced girth ring diameter le5m
Our girth EPTs Functions
Module Selection: ten Module to 70 Module.
Diameter : Min 800mm to16000 mm.
Fat : Max 120 MT single piece.
A few different designs: Fabricated metal – solid ring – rolled plate
StXiHu (West EPT) Dis.Hu (West EPT) Dis.rds/Certificates : #8226 UNI EN ISO #8226 AWS #8226 ASTM #8226 AEPTE #8226 DIN
Girth EPT chopping EPTTs
Phi16m CNC hobbing EPTT
Phi12m EPT slicing EPTT (Switzerland)
Phi10m hobbing EPTT (Germany)
Phi4m CNC higher velocity hobbing EPTT (Germany)
Phi1.6m Horizontal CNC hobbing EPTT (Germany)
Phi5m CNC profile EPT grinding EPTT (Germany)
Phi2.8m CNC Profile EPT grinding EPTT (Germany)
Phi1.25m CNC Profile EPT grinding EPTT (Germany)
Phi1m CNC Profile EPT grinding EPTT (Germany)
Specs of EPT :
| No. |
Merchandise |
Description |
|
| one |
Diameter |
le15m |
|
| 2 |
Module |
le45 |
|
| three |
EPT |
Forged Alloy Steel, Cast EPTT Metal, Forged Alloy Steel, Cast EPTT Steel |
|
| four |
Structure From |
Built-in, 50 % to 50 %, 4 Pieces and Much more Pieces |
|
| |
| five |
Heat Treatment |
Quenching amp Tempering, Normalizing amp Tempering, Carburizing amp Quenching amp Tempering |
|
| |
| six |
Tooth Form |
Annular EPT, Outer EPT Ring |
|
| 7 |
StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
ISO, EN, DIN, AISI, ASTM, JIS, IS, GB |
|
Inspection and Check Outline of Girth EPT:
| No. |
Merchandise |
Inspection Location |
Acceptance Requirements |
Inspection Phase |
Certificates |
| 1 |
EPTT
Composition |
Sample |
EPT Need |
When Smelting
After Warmth Treatment |
EPTT Composition
Report |
| two |
EPT
Houses |
Sample(Check Bar on the EPT Body) |
EPTnical Need |
Right after Heat Treatment |
EPT Houses
Report |
| 3 |
Heat
Therapy |
EPTT Entire body |
EPT StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
Throughout Warmth Treatment method |
Heat Treatment Report
Curves of Heat
Remedy |
| four |
Hardness
Take a look at |
Tooth Area, 3 Factors Per 90 deg |
EPTnical Prerequisite |
Soon after Warmth Treatment |
Hardness Teat Report |
Following Semi End
Machining |
| 5 |
Dimension
Inspection |
EPTT Human body |
Drawing |
Soon after Semi Complete
Machining |
Dimension Inspection
Report |
| End Machining |
| 6 |
EPTic EPTT Check (MT) |
Tooth Surface area |
Agreed StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
Soon after Complete EPT
Hobbing |
MT Report |
| 7 |
UT |
Spokes Components |
Agreed StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
Following Tough Machining |
UT Report |
| Soon after Welded |
After Semi End
Machining |
| 8 |
PT |
Defect Location |
No Defect Indicated |
After Digging
Soon after Welded |
PT EPTrd |
| nine |
Mark Inspection |
EPTT Physique |
EPT StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd |
Last Inspection |
Pictures |
| 10 |
Appearance
Inspection |
EPTT Body |
CIC’s Need |
Just before EPTT
(Last Inspection) |
|
| eleven |
Anti-rust
Inspection |
EPTT Human body |
Agreed Anti-rust Agent |
Before EPTT |
Images |
| twelve |
EPTT
Inspection |
EPTT Body |
Agreed EPTT Sort |
During EPTT |
Pictures |
FaXiHu (West EPT) Dis.Hu (West EPT) Dis.ties For EPT EPT ring:
| No. |
Merchandise |
Description |
| one |
Smelting amp EPTT Capability |
40t ,50t, 80t Series AC Electric Arc Furnace
two times150t, 60t EPTT Ladle Refining Furnace
150t, 60t Collection VD/VOD Furnace
20 times18m Big Pouring FaXiHu (West EPT) Dis.Hu (West EPT) Dis.ty
We can pour 900t refining liquid metal a single time, and obtain EPT poured 600t steel ingots.
We can create the higher quality metal of more than 260 metal grades as carbon metal,structural alloy metal and the structural steel, refractory metal and stainless metal of EPTT requirement. The maXiHu (West EPT) Dis.mum weight of casting steel, grey casting, graphite cast iron and non-ferrous casting is 600t, 200t, 150t and 20t individually. |
| two |
EPT Ability |
The only 1 in the phrase, the most technologically EPTd and the largest specification18500t Oil Push, equipped with 750t.m forging procedure EPTT
8400t Drinking water Push
3150t Drinking water Push
1600t Water Push
Phi5m EPT EPT Ring Mill ( WAGNER,Germany)
Phi12m EPT EPT Ring Mill
We can roll rings of different EPTs of carbon metal, alloy metal, large temperature alloy steel and non-ferrous alloys this kind of as copper alloy, EPT alloy and EPTTium alloy. Max. Diameter of rolled ring will be 12m. |
| 3 |
Warmth Treatment Functionality |
nine times9 times15m,eight times8 times12m,six times6 times15m,15 times16 times6.5m,sixteen times20 times6m ,seven times7 times17m Series Heat Furnace and Warmth Treatment method Furnaces
phi2. times30m, phi3. times5.0m Series Heat Treatment Furnaces
phi5. times2.5m, phi3.two times1.5m, phi3. times5.0m, phi2. times5m Series Carburizing Furnaces amp Nitriding Furnaces amp Quenching Bathes
phi2. times30m Properly Type CNC EPT Furnaces
Phi3. times5.0M Horizontal Gasoline Temperature-differential Furnace
EPTT-frequency and EPTT-situation Quenching Lathe of Pinion Shaft |
| 4 |
Machining Capacity |
1. ge5m CNC EPT Responsibility Vertical Lathes
12m CNC EPTT-column Vertical Lathe
10m CNC EPTT-column Vertical Lathe
10m CNC Solitary-column Vertical Lathe
6.3m EPT Obligation Vertical Lathe
5m CNC EPT Duty Vertical Lathe |
2. ge5m Vertical EPT Hobbing EPTTs
15m CNC Vertical EPT Hobbing EPTT
10m EPT Hobbing EPTT
8m EPT Hobbing EPTT
5m EPT Hobbing EPTT
3m EPT Hobbing Machining |
3. EPTTorted EPT-precision EPT EPT EPTTs
.8m~3.5m CNC Molding EPT EPT EPTTs |
four. Big Dull amp Milling EPTTs
220 CNC EPTr-mounted Boring amp Milling EPTT
two hundred CNC EPTr-mounted Boring amp Milling EPTT
one hundred sixty CNC EPTr-mounted Boring amp Milling EPTT |
FAQ
Q: How about the high quality of your items?
A: Our EPTTs are made strictly according to countrywide and worldwide stXiHu (West EPT) Dis.Hu (West EPT) Dis.rds, and we just take a check on every single gear ahead of shipping.
Q: How about the value?
A: We are manufactory, and we can give you reduced value than people trade businesses. In addition to, consumers from Made in EPTT can get a price reduction.
Q: Do you offer following-sale support?
A: Indeed. The warranty time period of our EPTTs is a single year, and we have a specialist after-sale team to instantly and completely solve your troubles.
Q: Do you supply gear procedure coaching?
A: Yes. We can deliver expert engineers to the doing work internet site for tools installation, adjustment, and operation coaching. All of our engineers have passports.
