Product Description
Product Parameters
Editing and broadcasting of main materials
1. Body, die-casting aluminum alloy;
2. Worm shaft, 20 Crq steel, high temperature treatment;
3. Worm gear, nickel bronze alloy;
4. Aluminum alloy body, sandblasting and surface anti-corrosion treatment;
5. Cast iron body, painted with bIu RA5571.
Regular center distance specification editing and broadcasting
Center distance: 130 (unit: mm).
Output hole/shaft diameter: 11, 14, 18, 25, 28, 35, 42, 45 (unit: mm)
Detailed Photos
|
NMRV-063-30-VS–AS-80B5-0.75KW-B3 |
|||
|
NMRV |
Means hole-input with flange |
||
|
NRV |
Means shaft-input without flange |
||
|
063 |
Centre-to-centre spacing of worm-gear speed reducer |
||
|
30 |
ratio |
||
|
VS |
Double input shaft |
F1(FA) |
Flange putput shaft |
|
AS |
Single output shaft |
AB |
Double output shaft |
|
PAM |
|
80B5 |
Motor mounting facility |
|
0.75KW |
|
B3 |
Mounting position |
|
N2 |
NRV571 |
NRV030 |
NRV040 |
NRV050 |
NRV063 |
NRV075 |
NRV090 |
NRV110 |
NRV130 |
|
400 |
390 |
530 |
1571 |
1400 |
1830 |
2160 |
2390 |
3571 |
3950 |
|
250 |
460 |
620 |
1200 |
1650 |
2150 |
2520 |
2800 |
3530 |
4610 |
|
150 |
550 |
740 |
1420 |
1960 |
2450 |
2990 |
3310 |
4180 |
5470 |
|
100 |
630 |
850 |
1620 |
2250 |
2910 |
3430 |
3800 |
4790 |
6260 |
|
60 |
740 |
1000 |
1920 |
2660 |
3450 |
4060 |
4500 |
5680 |
7420 |
|
40 |
850 |
1150 |
2200 |
3050 |
3950 |
4650 |
5150 |
6500 |
8500 |
|
25 |
990 |
1350 |
2570 |
3570 |
4620 |
5440 |
6571 |
7600 |
9940 |
|
10 |
1350 |
1830 |
3490 |
4840 |
6270 |
7380 |
8180 |
10320 |
13500 |
|
|
|
|
|
|
|
|
|
|
|
|
A |
50 |
65 |
84 |
101 |
120 |
131 |
162 |
191 |
203 |
|
B |
38 |
50 |
64 |
76 |
95 |
101 |
122 |
151 |
163 |
Use and safety guarantee
1. Please check and confirm the matching intensity between worm gear reducer and mechanical equipment before use to assure that it is in the safety range of worm gear reducer performance parameters
2. Worm gear reducer has filled with WA460 lubricating oil. Please replace the lubricating oil after the first starting of 400 hours and after then 4000 hours for lubricating oil replacing cycle
3. There should be enough lubrication in worm gear box and keep regular check with the oil level.
4. When installation. please be careful to avoid sharp instruments bruising the oil seals on output shaft to cause leakage
5. Please confirm the rotation direction before mechanical connection. If the rotation direction is not correct, it will possible injury or damage the devices
6. Please set safety covers in rotating position to avoid of injuring
7. Please pay full attention: it is very dangerous if there is off or falling when movin
| Hardness: | Hardened Tooth Surface |
|---|---|
| Installation: | 90 Degree |
| Layout: | Expansion |
| Gear Shape: | Bevel Gear |
| Step: | Single-Step |
| Type: | Gear Reducer |
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) | |
|---|
Calculating Torque Requirements for an NMRV Gearbox
Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.
- Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
- Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
- Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
- Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.
Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency
Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.
Design Principles of an NMRV Gearbox
The design of an NMRV (worm gear) gearbox is based on key principles that enable its efficient and reliable operation:
- Worm Gear Mechanism: The core of an NMRV gearbox is the worm screw and worm wheel. The worm screw, typically cylindrical in shape, meshes with the teeth of the worm wheel. This configuration provides high gear reduction ratios.
- Helical Gearing: The worm screw is usually helical, allowing for smoother engagement with the worm wheel. Helical gearing reduces the sliding friction and noise associated with traditional straight-cut worm gears.
- Compact Design: NMRV gearboxes are designed to be compact, often with a right-angle configuration. This allows for efficient use of space in various applications.
- Alloy Construction: Many NMRV gearboxes are constructed from high-quality alloys, providing durability and corrosion resistance. The choice of materials ensures a gearbox capable of withstanding varying loads and environmental conditions.
- Bearing Support: Bearings support the rotating elements within the gearbox, reducing friction and ensuring smooth operation. Bearings are strategically placed to handle radial and axial loads.
- Sealing and Lubrication: NMRV gearboxes are equipped with effective sealing mechanisms to prevent the entry of contaminants and to retain lubricating oil. Proper lubrication is essential for reducing wear and enhancing gearbox efficiency.
- Efficient Power Transmission: The worm gear mechanism in NMRV gearboxes provides high gear reduction ratios, allowing for efficient power transmission while minimizing energy losses.
- Quiet Operation: The helical design of the worm screw and worm wheel contributes to quieter operation compared to traditional straight-cut worm gears.
- Wide Range of Ratios: NMRV gearboxes are available in various gear ratios, allowing users to select the appropriate configuration for their specific application needs.
The combination of these design principles results in an NMRV gearbox that offers efficient, reliable, and quiet power transmission for a wide range of industrial applications.
Key Features of an NMRV Gearbox
NMRV gearboxes, also known as worm gear reducers, offer several key features that make them suitable for various applications:
- Compact Design: NMRV gearboxes are known for their compact and space-saving design, making them ideal for installations with limited space.
- High Efficiency: These gearboxes offer relatively high efficiency levels, which ensures efficient power transmission and reduced energy loss.
- Speed Reduction: NMRV gearboxes are primarily used for speed reduction applications, where the input speed is reduced while torque is increased.
- Torque Multiplication: The worm and worm wheel mechanism allows for torque multiplication, making NMRV gearboxes suitable for applications requiring high torque output.
- Self-Locking: The helical design of the worm causes self-locking, preventing the output shaft from back-driving the input shaft and providing mechanical locking.
- Smooth Operation: NMRV gearboxes offer smooth and quiet operation, making them suitable for applications where noise reduction is important.
- Wide Range of Ratios: These gearboxes come in a wide range of gear ratios, allowing users to select the appropriate ratio for their specific application.
- Low Maintenance: The simple design and few moving parts contribute to the low maintenance requirements of NMRV gearboxes.
- Versatility: NMRV gearboxes are versatile and can be used in various industries and applications, including conveyor systems, food processing, packaging, and more.
It’s important to consider these key features when selecting an NMRV gearbox for your specific application to ensure optimal performance and efficiency.
editor by CX 2023-12-15
China best Nmrv Worm Speed Reducer Transmission Gearbox with Motor Gear Unit differential gearbox
Product Description
Product Description
Main Materials:
1)housing:aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
Detailed Photos
Combination Options:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS
Exploded View:
Product Parameters
| Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV571 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
GMRV Outline Dimension:
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Company Profile
About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.
Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia
Logistics
After Sales Service
1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.
FAQ
1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Right Angle |
| Gear Shape: | Worm Gear |
| Step: | Double-Step |
| Samples: |
US$ 12/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Cost of an NMRV Gearbox
The cost of an NMRV gearbox can vary widely depending on factors such as type, size, quality, brand, features, customization, materials, construction, and market demand. As of my last update in September 2021, prices can range from tens of dollars for standard models to several hundred dollars or more for larger or specialized configurations. It’s important to obtain quotes from various suppliers and manufacturers for an accurate cost estimate.
Design Principles of an NMRV Gearbox
The design of an NMRV (worm gear) gearbox is based on key principles that enable its efficient and reliable operation:
- Worm Gear Mechanism: The core of an NMRV gearbox is the worm screw and worm wheel. The worm screw, typically cylindrical in shape, meshes with the teeth of the worm wheel. This configuration provides high gear reduction ratios.
- Helical Gearing: The worm screw is usually helical, allowing for smoother engagement with the worm wheel. Helical gearing reduces the sliding friction and noise associated with traditional straight-cut worm gears.
- Compact Design: NMRV gearboxes are designed to be compact, often with a right-angle configuration. This allows for efficient use of space in various applications.
- Alloy Construction: Many NMRV gearboxes are constructed from high-quality alloys, providing durability and corrosion resistance. The choice of materials ensures a gearbox capable of withstanding varying loads and environmental conditions.
- Bearing Support: Bearings support the rotating elements within the gearbox, reducing friction and ensuring smooth operation. Bearings are strategically placed to handle radial and axial loads.
- Sealing and Lubrication: NMRV gearboxes are equipped with effective sealing mechanisms to prevent the entry of contaminants and to retain lubricating oil. Proper lubrication is essential for reducing wear and enhancing gearbox efficiency.
- Efficient Power Transmission: The worm gear mechanism in NMRV gearboxes provides high gear reduction ratios, allowing for efficient power transmission while minimizing energy losses.
- Quiet Operation: The helical design of the worm screw and worm wheel contributes to quieter operation compared to traditional straight-cut worm gears.
- Wide Range of Ratios: NMRV gearboxes are available in various gear ratios, allowing users to select the appropriate configuration for their specific application needs.
The combination of these design principles results in an NMRV gearbox that offers efficient, reliable, and quiet power transmission for a wide range of industrial applications.
NMRV Gearbox Ratios
NMRV gearboxes are available in a variety of gear ratios to suit different applications and torque requirements. The gear ratio determines the relationship between the input and output speeds of the gearbox. Commonly available ratios include:
- 5:1: This ratio provides higher output torque at a slower output speed compared to the input speed.
- 7.5:1: This ratio offers a balance between torque and speed.
- 10:1: With this ratio, the output speed is further reduced while increasing torque output.
- 15:1: This ratio is suitable for applications requiring higher torque output at the expense of speed.
- 20:1: This ratio maximizes torque output while significantly reducing output speed.
- 25:1: It provides even higher torque output at a further reduced output speed.
- 30:1: This ratio is ideal for applications demanding maximum torque at minimum output speed.
- 40:1 and higher: These ratios are used in applications with very high torque requirements and low output speed.
The choice of gearbox ratio depends on the specific application, desired output speed, and required torque. It’s important to select the right ratio to ensure optimal performance and efficiency in your machinery.
editor by CX 2023-12-04
China high quality Nmrv Speed Reducer Right Angle Worm Gearbox with Motor bevel gearbox
Product Description
Product Description
Main Materials:
1)housing:aluminium alloy ADC12(size 571-090); die cast iron HT200(size 110-150);
2)Worm:20Cr, ZI Involute profile; carbonize&quencher heat treatment make gear surface hardness up to 56-62 HRC; After precision grinding, carburization layer’s thickness between 0.3-0.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1
Detailed Photos
Combination Options:
Input:with input shaft, With square flange,With IEC standard input flange
Output:with torque arm, output flange, single output shaft, double output shaft, plastic cover
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+PC, NMRV+UDL, NMRV+MOTORS
Exploded View:
Product Parameters
| Old Model |
New Model | Ratio | Center Distance | Power | Input Dia. | Output Dia. | Output Torque | Weight |
| RV571 | 7.5~100 | 25mm | 0.06KW~0.12KW | Φ9 | Φ11 | 21N.m | 0.7kgs | |
| RV030 | RW030 | 7.5~100 | 30mm | 0.06KW~0.25KW | Φ9(Φ11) | Φ14 | 45N.m | 1.2kgs |
| RV040 | RW040 | 7.5~100 | 40mm | 0.09KW~0.55KW | Φ9(Φ11,Φ14) | Φ18(Φ19) | 84N.m | 2.3kgs |
| RV050 | RW050 | 7.5~100 | 50mm | 0.12KW~1.5KW | Φ11(Φ14,Φ19) | Φ25(Φ24) | 160N.m | 3.5kgs |
| RV063 | RW063 | 7.5~100 | 63mm | 0.18KW~2.2KW | Φ14(Φ19,Φ24) | Φ25(Φ28) | 230N.m | 6.2kgs |
| RV075 | RW075 | 7.5~100 | 75mm | 0.25KW~4.0KW | Φ14(Φ19,Φ24,Φ28) | Φ28(Φ35) | 410N.m | 9.0kgs |
| RV090 | RW090 | 7.5~100 | 90mm | 0.37KW~4.0KW | Φ19(Φ24,Φ28) | Φ35(Φ38) | 725N.m | 13.0kgs |
| RV110 | RW110 | 7.5~100 | 110mm | 0.55KW~7.5KW | Φ19(Φ24,Φ28,Φ38) | Φ42 | 1050N.m | 35.0kgs |
| RV130 | RW130 | 7.5~100 | 130mm | 0.75KW~7.5KW | Φ24(Φ28,Φ38) | Φ45 | 1550N.m | 48.0kgs |
| RV150 | RW150 | 7.5~100 | 150mm | 2.2KW~15KW | Φ28(Φ38,Φ42) | Φ50 | 84.0kgs |
GMRV Outline Dimension:
| GMRV | A | B | C | C1 | D(H8) | E(h8) | F | G | G1 | H | H1 | I | M | N | O | P | Q | R | S | T | BL | β | b | t | V |
| 030 | 80 | 97 | 54 | 44 | 14 | 55 | 32 | 56 | 63 | 65 | 29 | 55 | 40 | 57 | 30 | 75 | 44 | 6.5 | 21 | 5.5 | M6*10(n=4) | 0° | 5 | 16.3 | 27 |
| 040 | 100 | 121.5 | 70 | 60 | 18(19) | 60 | 43 | 71 | 78 | 75 | 36.5 | 70 | 50 | 71.5 | 40 | 87 | 55 | 6.5 | 26 | 6.5 | M6*10(n=4) | 45° | 6 | 20.8(21.8) | 35 |
| 050 | 120 | 144 | 80 | 70 | 25(24) | 70 | 49 | 85 | 92 | 85 | 43.5 | 80 | 60 | 84 | 50 | 100 | 64 | 8.5 | 30 | 7 | M8*12(n=4) | 45° | 8 | 28.3(27.3) | 40 |
| 063 | 144 | 174 | 100 | 85 | 25(28) | 80 | 67 | 103 | 112 | 95 | 53 | 95 | 72 | 102 | 63 | 110 | 80 | 8.5 | 36 | 8 | M8*12(n=8) | 45° | 8 | 28.3(31.3) | 50 |
| 075 | 172 | 205 | 120 | 90 | 28(35) | 95 | 72 | 112 | 120 | 115 | 57 | 112.5 | 86 | 119 | 75 | 140 | 93 | 11 | 40 | 10 | M8*14(n=8) | 45° | 8(10) | 31.3(38.3) | 60 |
| 090 | 206 | 238 | 140 | 100 | 35(38) | 110 | 74 | 130 | 140 | 130 | 67 | 129.5 | 103 | 135 | 90 | 160 | 102 | 13 | 45 | 11 | M10*16(n=8) | 45° | 10 | 38.3(41.3) | 70 |
| 110 | 255 | 295 | 170 | 115 | 42 | 130 | – | 144 | 155 | 165 | 74 | 160 | 127.5 | 167.5 | 110 | 200 | 125 | 14 | 50 | 14 | M10*18(n=8) | 45° | 12 | 45.3 | 85 |
| 130 | 293 | 335 | 200 | 120 | 45 | 180 | – | 155 | 170 | 215 | 81 | 179 | 146.5 | 187.5 | 130 | 250 | 140 | 16 | 60 | 15 | M12*20(n=8) | 45° | 14 | 48.8 | 100 |
| 150 | 340 | 400 | 240 | 145 | 50 | 180 | – | 185 | 200 | 215 | 96 | 210 | 170 | 230 | 150 | 250 | 180 | 18 | 72.5 | 18 | M12*22(n=8) | 45° | 14 | 53.8 | 120 |
Company Profile
About CHINAMFG Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our leading products is full range of RV571-150 worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, PC units, UDL Variators and AC Motors, G3 helical gear motor.
Products are widely used for applications such as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-making, construction machinery, metallurgic mine, environmental protection engineering, and all kinds of automatic lines, and assembly lines.
With fast delivery, superior after-sales service, advanced producing facility, our products sell well both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our aim is to develop and innovate on basis of high quality, and create a good reputation for reducers.
Packing information:Plastic Bags+Cartons+Wooden Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Win Eurasia
Logistics
After Sales Service
1.Maintenance Time and Warranty:Within 1 year after receiving goods.
2.Other Service: Including modeling selection guide, installation guide, and problem resolution guide, etc.
FAQ
1.Q:Can you make as per customer drawing?
A: Yes, we offer customized service for customers accordingly. We can use customer’s nameplate for gearboxes.
2.Q:What is your terms of payment ?
A: 30% deposit before production,balance T/T before delivery.
3.Q:Are you a trading company or manufacturer?
A:We are a manufacurer with advanced equipment and experienced workers.
4.Q:What’s your production capacity?
A:8000-9000 PCS/MONTH
5.Q:Free sample is available or not?
A:Yes, we can supply free sample if customer agree to pay for the courier cost
6.Q:Do you have any certificate?
A:Yes, we have CE certificate and SGS certificate report.
Contact information:
Ms Lingel Pan
For any questions just feel free ton contact me. Many thanks for your kind attention to our company!
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Industry |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Right Angle |
| Gear Shape: | Worm Gear |
| Step: | Double-Step |
| Samples: |
US$ 12/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Advantages of Using Worm Gear in an NMRV Gearbox
Worm gears offer several advantages when used in an NMRV gearbox:
1. High Reduction Ratio: Worm gears provide a high reduction ratio in a compact form, allowing for significant speed reduction in a single stage.
2. High Efficiency: While worm gears typically have lower mechanical efficiency compared to some other gear types, the design of the NMRV gearbox optimizes efficiency by using a bronze worm gear and a self-locking mechanism that minimizes backdriving.
3. Compact Design: Worm gears have a compact and space-efficient design, making them suitable for applications with limited installation space.
4. Smooth and Quiet Operation: The meshing of worm gears and the helical design of the worm result in relatively smooth and quiet operation.
5. Self-Locking: Worm gears inherently have a self-locking characteristic, meaning that the gear cannot easily be back-driven by the worm. This property is beneficial for applications where holding position without external locking mechanisms is essential.
6. High Torque Capacity: Worm gears can transmit high torque loads, making them suitable for applications that require high torque output.
7. Simple Lubrication: The design of the NMRV gearbox allows for efficient lubrication of the worm gear, ensuring optimal performance and longevity.
These advantages make worm gears a popular choice for NMRV gearboxes in various industrial applications, where their characteristics contribute to reliable and efficient power transmission.
Benefits of Using an NMRV Gearbox
NMRV gearboxes offer several advantages that make them a popular choice in various applications:
- Compact Design: NMRV gearboxes are compact and space-efficient, making them suitable for installations with limited space.
- High Efficiency: These gearboxes are designed for high efficiency, minimizing energy losses during power transmission.
- Smooth Operation: NMRV gearboxes provide smooth and reliable operation due to their precise gear meshing and design.
- Quiet Performance: The design and quality of NMRV gearboxes contribute to quiet operation, reducing noise levels in various applications.
- Cost-Effective: Their efficient manufacturing processes and durability make NMRV gearboxes a cost-effective choice for power transmission.
- Wide Ratio Range: NMRV gearboxes are available in a wide range of gear ratios, allowing users to select the most suitable option for their specific application needs.
- Corrosion Resistance: Many NMRV gearboxes are constructed using materials that offer corrosion resistance, enhancing their longevity and performance in harsh environments.
- Easy Installation: The compact and lightweight design of NMRV gearboxes makes them relatively easy to install and integrate into various systems.
- Low Maintenance: With proper lubrication and maintenance, NMRV gearboxes can have a long service life with minimal maintenance requirements.
- Versatility: NMRV gearboxes are versatile and can be used in a wide range of applications, from industrial machinery to conveyor systems.
These benefits collectively contribute to the popularity of NMRV gearboxes in industries where efficient and reliable power transmission is crucial.
Using an NMRV Gearbox
An NMRV gearbox, also known as a worm gear reducer, is commonly used for various applications that require speed reduction, torque multiplication, and smooth power transmission. This type of gearbox offers several benefits:
- Compact Design: NMRV gearboxes have a compact and space-saving design, making them suitable for applications with limited installation space.
- High Gear Ratio: Worm gear reducers can achieve high gear ratios in a single stage, making them ideal for applications where a significant reduction in speed is needed.
- Quiet Operation: The meshing of the worm gear and worm wheel results in low noise levels during operation.
- Simple Operation: NMRV gearboxes have a simple design with fewer components, leading to ease of operation and maintenance.
- Reliable and Durable: Worm gear reducers are known for their reliability and durability, making them suitable for continuous and heavy-duty applications.
Common applications of NMRV gearboxes include:
- Conveyor systems
- Material handling equipment
- Industrial machinery
- Automated systems
- Food processing equipment
- Packaging machinery
Due to their versatility and ability to provide precise speed reduction, NMRV gearboxes are widely used in various industries to optimize the performance of different types of machinery and equipment.
editor by CX 2023-10-31
China Custom Worm Gear Speed Reducer Gear Motor Nmrv Worm Reduction Gearbox Connector Transmission High Quality RV Worm Gearbox Ratio 5-100 Made in China gearbox design
Product Description
Worm Gear Speed Reducer Gear Motor Nmrv Worm Reduction Gearbox Connector Transmission High Quality RV Worm Gearbox Ratio 5-100 Made in China
Features
1. Light in weight and non-rusting
2. Smooth in running, can work long time in dreadful conditions
3. High efficiency, low noise
4. Good-looking in appearance, durable in service life and small in volume
Detailed Photos
Product Parameters
Specification for worm gearbox:
| Model | 571 ~ 150 |
| Power | 0.06kw ~ 15kw |
| Input speed | 750rpm ~ 2000rpm |
| Reduction ratio | 1/5 ~ 1/100 |
| Input motor | AC (1 phase or 3 phase) / DC / BLDC / Stepper / Servo |
| Output shaft | Solid shaft / Hollow shaft / Output flange… |
| Dimension standard | Metric size / Inch size |
| Material of housing | die-cast aluminum / Cast iron / Stainless steel |
| Accessories | Flange / CHINAMFG shaft / Torque arm / Cover … |
Our Advantages
Certifications
FAQ
Q: Can you make the gearbox with customization?
A: Yes, we can customize per your request, like flange, shaft, configuration, material, etc.
Q: Do you provide samples?
A: Yes. The sample is available for testing.
Q: What is your MOQ?
A: It is 10pcs for the beginning of our business.
Q: What’s your lead time?
A: Standard products need 5-30days, a bit longer for customized products.
Q: Do you provide technical support?
A: Yes. Our company have design and development team, we can provide technical support if you
need.
Q: How to ship to us?
A: It is available by air, or by sea, or by train.
Q: How to pay the money?
A: T/T and L/C is preferred, with a different currency, including USD, EUR, RMB, etc.
Q: How can I know the product is suitable for me?
A: >1ST confirm drawing and specification >2nd test sample >3rd start mass production.
Q: Can I come to your company to visit?
A: Yes, you are welcome to visit us at any time.
Q: How shall we contact you?
A: You can send inquiry directly, and we will respond within 24 hours.
| Application: | Machinery |
|---|---|
| Function: | Change Drive Torque, Speed Reduction |
| Layout: | Right Angle |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Calculating Torque Requirements for an NMRV Gearbox
Calculating torque requirements for an NMRV gearbox involves several steps: Identify Input Torque, Calculate Output Torque, Consider Efficiency, and Add Safety Margin.
- Identify Input Torque: Determine the input torque required by the application, taking into account factors such as load, speed, and efficiency.
- Calculate Output Torque: Use the gear ratio of the NMRV gearbox to calculate the output torque needed to achieve the desired output speed.
- Consider Efficiency: Take into account the efficiency of the NMRV gearbox. The actual output torque will be influenced by the gearbox’s mechanical efficiency.
- Add Safety Margin: To ensure reliable performance and account for variations in operating conditions, it’s recommended to add a safety margin to the calculated torque requirements.
Formula to calculate output torque: Output Torque = Input Torque × Gear Ratio × Gearbox Efficiency
Keep in mind that torque requirements can vary based on the specific application and factors such as load type, duty cycle, and environmental conditions. Consulting with gearbox manufacturers or engineering experts can help ensure accurate torque calculations for your NMRV gearbox application.
Lifespan of an NMRV Gearbox
The lifespan of an NMRV (worm gear) gearbox can vary based on several factors, including the quality of manufacturing, proper maintenance practices, operating conditions, and the specific application it is used for. However, when designed, manufactured, and maintained properly, NMRV gearboxes can have a long and reliable service life.
High-quality NMRV gearboxes that are made from durable materials, precisely machined, and assembled with care tend to have a longer lifespan. Regular maintenance, including proper lubrication, inspection, and addressing any signs of wear or damage, can significantly extend the gearbox’s operational life.
The operating conditions in which the gearbox is used also play a role in determining its lifespan. Factors such as load, temperature, speed, and environment can impact the wear and tear on the gearbox components.
It’s important to follow the manufacturer’s recommendations for maintenance intervals and procedures to ensure optimal performance and longevity of the NMRV gearbox. By adhering to these guidelines and addressing any issues promptly, users can expect an NMRV gearbox to provide reliable service for many years.
NMRV Gearbox Ratios
NMRV gearboxes are available in a variety of gear ratios to suit different applications and torque requirements. The gear ratio determines the relationship between the input and output speeds of the gearbox. Commonly available ratios include:
- 5:1: This ratio provides higher output torque at a slower output speed compared to the input speed.
- 7.5:1: This ratio offers a balance between torque and speed.
- 10:1: With this ratio, the output speed is further reduced while increasing torque output.
- 15:1: This ratio is suitable for applications requiring higher torque output at the expense of speed.
- 20:1: This ratio maximizes torque output while significantly reducing output speed.
- 25:1: It provides even higher torque output at a further reduced output speed.
- 30:1: This ratio is ideal for applications demanding maximum torque at minimum output speed.
- 40:1 and higher: These ratios are used in applications with very high torque requirements and low output speed.
The choice of gearbox ratio depends on the specific application, desired output speed, and required torque. It’s important to select the right ratio to ensure optimal performance and efficiency in your machinery.
editor by CX 2023-10-11
China Standard CZPT Nmrv Gearbox with Worm Gear Hollow Shaft Motor Reducer bevel gearbox
Product Description
NMRV worm gearbox motor
NMRV series worm gear reducer:
Its structure,outline and installation dimensions as well as performance are same with that of
Europe an products,they are interchangeable,and the materials and machining process are advanced internationally.The product is featured by:
1.Low noise and temperature rise.
2.High bearing capability,smooth run and long service life.
3.ompact structure,samll volume,light weight,beautiful shape and easy to install.
4.Can run continuously under server environment,and has a good reliability.
GPHQ NMRV aluminum worm gearbox motor details:
| Type | GPHQ NMRV Worm Gear Speed Reducer /gearbox motor |
| Model: | NMRV25/30/ 40/ 50/ 63/ 75/ 90/110/130/150 |
| Input Power: | 0.06KW,0.09KW,0.12KW,0.18KW,0.22KW,0.25KW,0.37KW,0.55KW,0.75KW,1.1KW,1.5KW,2.2KW,4KW,5.5KW,7.5KW ,11KW,15KW |
| IEC Flange | 56B5,56B14,63B5,63B14,71B5,71B14,80B5,80B14,90B5,90B14,100B5, 100B14,112B5,112B14 132B5,160B5 |
| Ratio | 1: 7.5,10,15,20,25,30,40,50,60,80,100 |
| Material |
Housing: Die-Cast Aluminum Alloy for rv25-rv90 , die-cast cast iron for rv110 to rv150 |
| Worm Gear-brass+cast iron | |
| Worm-20CrMn Ti with carburizing and quenching, surface harness is 56-62HRC | |
| Shaft-chromium steel-45# | |
| Color: | Blue/Silver Or others if quantity is big |
| Packing: | Carton or plywood Case |
| Guarantee time : | 1 Year except except Man-made destruction |
| Usages: | Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing,Woodworking,Glass. |
| shaft: | output CZPT shaft or output hollow shaft |
FAQ
1, Q:what’s your MOQ for ac gearbox motor ?
A: 1pc is ok for each type electric gear box motor
2, Q: What about your warranty for your induction speed reducer motor ?
A: 1 year ,but except man-made destroyed
3, Q: which payment way you can accept ?
A: TT, western union .
4, Q: how about your payment way ?
A: 100%payment in advanced less $5000 ,30% payment in advanced payment , 70% payment before sending over $5000.
5, Q: how about your packing of speed reduction motor ?
A: plywood case ,if size is small ,we will pack with pallet for less 1 container
6, Q: What information should be given, if I buy electric helical geared motor from you ?
A: rated power, ratio or output speed,type ,voltage , mounting way , quantity , if more is better.
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Layout: | Right Angle |
| Hardness: | Hardened Tooth Surface |
| Step: | Single-Step |
| Ratio: | 7.5/10/15/20/25/30/40/50/60/80/100 |
| Gearbox Body: | Aluminum or Cast Iron |
| Customization: |
Available
| Customized Request |
|---|
Using NMRV Gearboxes in High-Load Applications
NMRV gearboxes can be used in moderate to high-load applications, but their load capacity is generally limited compared to some other gearbox types. They are best suited for applications with light to moderate loads, such as conveyor systems, packaging equipment, and small machinery. It’s important to consider the specific load requirements and consult with gearbox manufacturers or engineers to ensure the chosen NMRV gearbox can handle the intended application’s load demands.
Design Principles of an NMRV Gearbox
The design of an NMRV (worm gear) gearbox is based on key principles that enable its efficient and reliable operation:
- Worm Gear Mechanism: The core of an NMRV gearbox is the worm screw and worm wheel. The worm screw, typically cylindrical in shape, meshes with the teeth of the worm wheel. This configuration provides high gear reduction ratios.
- Helical Gearing: The worm screw is usually helical, allowing for smoother engagement with the worm wheel. Helical gearing reduces the sliding friction and noise associated with traditional straight-cut worm gears.
- Compact Design: NMRV gearboxes are designed to be compact, often with a right-angle configuration. This allows for efficient use of space in various applications.
- Alloy Construction: Many NMRV gearboxes are constructed from high-quality alloys, providing durability and corrosion resistance. The choice of materials ensures a gearbox capable of withstanding varying loads and environmental conditions.
- Bearing Support: Bearings support the rotating elements within the gearbox, reducing friction and ensuring smooth operation. Bearings are strategically placed to handle radial and axial loads.
- Sealing and Lubrication: NMRV gearboxes are equipped with effective sealing mechanisms to prevent the entry of contaminants and to retain lubricating oil. Proper lubrication is essential for reducing wear and enhancing gearbox efficiency.
- Efficient Power Transmission: The worm gear mechanism in NMRV gearboxes provides high gear reduction ratios, allowing for efficient power transmission while minimizing energy losses.
- Quiet Operation: The helical design of the worm screw and worm wheel contributes to quieter operation compared to traditional straight-cut worm gears.
- Wide Range of Ratios: NMRV gearboxes are available in various gear ratios, allowing users to select the appropriate configuration for their specific application needs.
The combination of these design principles results in an NMRV gearbox that offers efficient, reliable, and quiet power transmission for a wide range of industrial applications.
Working Principle of an NMRV Gearbox
An NMRV gearbox, also known as a worm gear reducer, operates based on a worm and worm wheel mechanism. Here’s how it works:
The gearbox consists of two main components: the worm (a screw-like shaft) and the worm wheel (a toothed wheel). The worm is driven by the input power source, while the worm wheel is connected to the output shaft.
As the worm rotates, its threaded shaft engages with the teeth of the worm wheel. The helical shape of the worm causes the teeth of the worm wheel to push against each other, resulting in a smooth and gradual transfer of motion. This mechanism provides the speed reduction and torque multiplication required for various applications.
One key characteristic of NMRV gearboxes is that the worm can turn the worm wheel, but the reverse is not possible due to the high friction generated by the helical threads. This feature prevents the output shaft from back-driving the input shaft, providing mechanical locking and enhancing safety and stability in applications.
The NMRV gearbox’s operation is continuous, and its simple design contributes to its reliability and efficiency. It is important to ensure proper lubrication to minimize wear and heat generation during operation.
editor by CX 2023-09-07
China manufacturer Nmrv Series Nmrv030 Nmrv40 Nmrv050 Nmrv063 Nmrv075 Nmrv090 Electric Motor Speed Reducer Worm Gearbox gearbox definition
Product Description
Descriptions: NMRV63 worm gear speed reducer Ratio 20:1
Product Paramenters:
Step angle:1.8° Temperature rise:below 80 ºC
Ambient temperature:-20 ºC ~ + 50 ºC
Insulation resistance:minimum 100MΩ, 500VDC
Dielectric strength:820VAC for 1 minute
Shaft radial clearance 0.02 max (450 g load)
Shaft axial clearance:0.08Max. (450 g load)
Maximum radial force:220N (20mm from flange)
Maximum axial force:60N
Model Name: JK86HS78-5504
Step Angle(degrees):1.8Degree
Model Number:NEMA34
Phase:2
Type:Hybrid
Current / Phase:5.5A
Resistance:0.46Ω
Inductance:4mH
Holding Torque:4.5N.m
Motor length:78mm
Number of leads: 4leads
Shaft Dia: 12mm or 12.7mm
Shaft Type: Round Shaft or D-cut Shaft
Model Name: JK86HS115-6004
Step Angle(degrees):1.8Degree
Model Number:NEMA34
Phase:2
Type:Hybrid
Current / Phase:6A
Resistance:0.6Ω
Inductance:6.5mH
Holding Torque:8.5N.m
Motor length:115mm
Number of leads: 4leads
Model Name: JK86HS155-6004
Step Angle(degrees):1.8Degree
Model Number:NEMA34
Phase:2
Type:Hybrid
Current / Phase:6A
Resistance:1Ω
Inductance:0.68mH
Holding Torque:12.5N.m
Motor length:155mm
Number of leads: 4leads
Detailed Image:
Company File:
WHY YOU CHOOSE US:
We are a professional manufacturer for Stepper motor , Stepper driver, BLDC motor and DC motor. we can supply OEM service.
Our products all with CE and ROHS.
Welcome you visit our company HangZhou Jingkong Motor&Electric Appliance Co.,Ltd
Depending on advanced technology and CZPT service, we establish a good and diligent team and keep nice business relationship with a large amount of worthy clients in global market. We are prepared to provide the best products to clients at competitive price.
High quality
Competitive price
Good Packing
Fast Delivery
Knight service
Advanced technology
Believe that we will do our best!
| Model No. | Step Angle | Motor Length | Current /Phase |
Resistance /Phase |
Inductance /Phase |
Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass |
| ( °) | (L)mm | A | Ω | mH | N.m | No. | kg.cm | g.cm2 | Kg | |
| JK86HS68-5904 | 1.8 | 67 | 5.9 | 0.28 | 1.7 | 3.4 | 4 | 0.8 | 1000 | 1.7 |
| JK86HS68-2808 | 1.8 | 67 | 2.8 | 1.4 | 3.9 | 3.4 | 8 | 0.8 | 1000 | 1.7 |
| JK86HS78-5504 | 1.8 | 78 | 5.5 | 0.46 | 4.0 | 4.6 | 4 | 1.2 | 1400 | 2.3 |
| JK86HS78-4208 | 1.8 | 78 | 4.2 | 0.75 | 3.4 | 4.6 | 8 | 1.2 | 1400 | 2.3 |
| JK86HS97-4504 | 1.8 | 97 | 4.5 | 0.66 | 3.0 | 5.8 | 4 | 1.7 | 2100 | 3.0 |
| JK86HS97-4008 | 1.8 | 97 | 4.0 | 0.98 | 4.1 | 4.7 | 8 | 1.7 | 2100 | 3.0 |
| JK86HS100-6004 | 1.8 | 100 | 6.0 | 0.36 | 2.8 | 7.0 | 4 | 1.9 | 2200 | 3.1 |
| JK86HS115-6004 | 1.8 | 115 | 6.0 | 0.6 | 6.5 | 8.7 | 4 | 2.4 | 2700 | 3.8 |
| JK86HS115-4208 | 1.8 | 115 | 4.2 | 0.9 | 6.0 | 8.7 | 8 | 2.4 | 2700 | 3.8 |
| JK86HS126-6004 | 1.8 | 126 | 6.0 | 0.58 | 6.5 | 6.3 | 4 | 2.9 | 3200 | 4.5 |
| JK86HS155-6004 | 1.8 | 155 | 6.0 | 0.68 | 9.0 | 13.0 | 4 | 3.6 | 4000 | 5.4 |
| JK86HS155-4208 | 1.8 | 155 | 4.2 | 1.25 | 8.0 | 12.2 | 8 | 3.6 | 4000 | 5.4 |
HangZhou Jingkong Motor Co.,Ltd
| Application: | Printing Equipment |
|---|---|
| Speed: | High Speed |
| Number of Stator: | Two-Phase |
| Excitation Mode: | HB-Hybrid |
| Function: | Control, Driving |
| Number of Poles: | Other |
| Customization: |
Available
| Customized Request |
|---|
Industries Using NMRV Gearboxes
NMRV gearboxes find widespread use in various industries due to their versatility and reliability. Some common industries include:
- Food and Beverage: NMRV gearboxes are used in conveyor systems, mixers, and packaging equipment.
- Material Handling: They are employed in conveyor belts, lifting equipment, and automated material handling systems.
- Automation and Robotics: NMRV gearboxes play a critical role in precise motion control and positioning in robotic systems.
- Textile: They are used in machinery for spinning, weaving, and fabric processing.
- Pharmaceutical: NMRV gearboxes are utilized in pill coating machines, mixers, and other pharmaceutical processing equipment.
- Agriculture: They find applications in irrigation systems, conveyor systems, and various agricultural machinery.
- Packaging: NMRV gearboxes are used in packaging machinery to ensure controlled movement and accuracy.
- Automotive: They are used in automated assembly lines and manufacturing processes in the automotive industry.
- Printing: NMRV gearboxes contribute to precise movement and synchronization in printing machinery.
- Energy: They are employed in wind turbine systems, solar tracking systems, and other renewable energy applications.
The adaptability and efficiency of NMRV gearboxes make them a preferred choice in industries that require reliable and precise power transmission solutions.
editor by CX 2023-08-22
China Hot selling Nmrv Worm Gear Motor Gearbox Reducer RV Worm Transmission Gearbox Worm Reduction automatic gearbox
Product Description
Worm gearbox speed reducer electric motor dc are on sale with high quality for you
SMRV series worm-gear speed reducer :
It is a new-generation of products developed by our
company with combination of advanced technologyboth at home and abroad. The product is featured by:
1. Aluminium alloy die-cast casing for RV571, 030,040, 050, 063, 075, 090, light weight and non-rusting;cast iron casing for RV110, 130, 150.
2. Large output torque.
3. Stable transmission with lower noise.
4. High heat-radiating efficiency.
5. Elegant shape, small volume and durable serving life.
6. Suitable for omnibearing installation.
Product display
NMRV aluminum worm gearbox motor details:
You can choose the 1 type that you need form these product introction.
workshop and production equipment
Fand a market abroad
More than 50 countries and regions
If you have any question,please contact me.
HangZhou CZPT Machinery Co.,ltd is a company specialized in research, manufacture and service of speed gearbox. Ever since establishment, we have been persisting in technical innovation, advancing the techonology to our products while maintaining our strict quality controls. It is the reason that our products branding ”Xihu (West Lake) Dis.n” have enjoyed such successful global sales.
At present, our company mainly supplies 5 series products as RV worm gearbox, UDL series speed variator,PC series helical gear unit,G3 helical geared motor and SRC helical gearbox. The products are widely applied in the mechanical equipment field such as food and beverage,cement,package,chemical and dyeing, rubber and plastic, CNC machine tool,etc.
Our products have been processed ISO 9001 Quality System Certification and exported to Italy,Spain,Britain,Poland,Turkey.The USA and other European countries,earn the good reputation with our outstanding quality and service.
Customers first,customers satisfaction, excellent after sale service and incessant innovation are our tenet and motto. We will go all out to provide all the customers with high quality and service.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Single-Step |
| Samples: |
US$ 105.6/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Lifespan of an NMRV GearboxThe lifespan of an NMRV (worm gear) gearbox can vary based on several factors, including the quality of manufacturing, proper maintenance practices, operating conditions, and the specific application it is used for. However, when designed, manufactured, and maintained properly, NMRV gearboxes can have a long and reliable service life. High-quality NMRV gearboxes that are made from durable materials, precisely machined, and assembled with care tend to have a longer lifespan. Regular maintenance, including proper lubrication, inspection, and addressing any signs of wear or damage, can significantly extend the gearbox’s operational life. The operating conditions in which the gearbox is used also play a role in determining its lifespan. Factors such as load, temperature, speed, and environment can impact the wear and tear on the gearbox components. It’s important to follow the manufacturer’s recommendations for maintenance intervals and procedures to ensure optimal performance and longevity of the NMRV gearbox. By adhering to these guidelines and addressing any issues promptly, users can expect an NMRV gearbox to provide reliable service for many years. Customized Request |
|---|
Working Principle of an NMRV Gearbox
An NMRV gearbox, also known as a worm gear reducer, op
Troubleshooting Abnormal Noises in an NMRV Gearbox
Abnormal noises from an NMRV gearbox can be troublesome and might indicate underlying issues. Follow these steps to troubleshoot and resolve the problem:
- Identify the Noise: Listen closely to the noise and determine if it’s a grinding, whining, or knocking sound.
- Check Lubrication: Insufficient or contaminated lubrication can lead to noises. Ensure the gearbox is properly lubricated.
- Inspect Gears: Examine the gear teeth for wear, damage, or misalignment.
- Look for Foreign Objects: Foreign objects inside the gearbox can cause noise. Clean and inspect the interior.
- Check Bearings: Worn or damaged bearings can be noisy. Inspect and replace them if necessary.
- Inspect Seals: Damaged seals can allow contaminants in, affecting performance. Replace damaged seals.
- Examine Housing: Ensure the gearbox housing is intact without cracks or misalignment.
- Review Load Conditions: Excessive loads can lead to noise. Ensure the gearbox isn’t overloaded.
- Check Mounting: Confirm the gearbox is properly mounted and aligned.
- Consult Guidelines: Refer to manufacturer guidelines for specific troubleshooting steps.
- Professional Help: If the issue persists, seek help from a professional technician or manufacturer.
Follow these steps to identify and rectify abnormal noises in your NMRV gearbox.
erates based on a worm and worm wheel mechanism. Here’s how it works:
The gearbox consists of two main components: the worm (a screw-like shaft) and the worm wheel (a toothed wheel). The worm is driven by the input power source, while the worm wheel is connected to the output shaft.
As the worm rotates, its threaded shaft engages with the teeth of the worm wheel. The helical shape of the worm causes the teeth of the worm wheel to push against each other, resulting in a smooth and gradual transfer of motion. This mechanism provides the speed reduction and torque multiplication required for various applications.
One key characteristic of NMRV gearboxes is that the worm can turn the worm wheel, but the reverse is not possible due to the high friction generated by the helical threads. This feature prevents the output shaft from back-driving the input shaft, providing mechanical locking and enhancing safety and stability in applications.
The NMRV gearbox’s operation is continuous, and its simple design contributes to its reliability and efficiency. It is important to ensure proper lubrication to minimize wear and heat generation during operation.
editor by CX 2023-08-17
China 42mm 24V right angle worm gear motor dc bldc motor with gearbox reducer ratio (10,20,25,50) worm gearbox assembly
Warranty: 1year
Design Amount: FG42
Utilization: Enthusiast, Residence Equipment, Beauty instrument, Sensible House
Type: Equipment MOTOR, brushless dc motor with gearbox
Torque: .1NM
Design: Everlasting Magnet
Commutation: Brushless
Protect Attribute: Explosion-evidence
Pace(RPM): 3 keyless shaft locking system Coupling Manufacturer precision high electrical power transmission Hot Sale twenty,25,fifty)
Parameters
| Brand Name | Ican |
| Model Number | 42FGELU- 42BLF0330 -24 |
| Usage | BOAT, Vehicle, Property Appliance, Beauty instrument, Sensible Property |
| Certification | CE, RoHS |
| Commutation | Brushless |
| Protect Function | Explosion-proof |
| Rated Pace(RPM) | 3000rpm |
| Continuous Current(A) | 2A |
| Efficiency | IE 1 |
| Type | brushless dc motor with gearbox |
| Rated torque | 0.1N.m |
| Rated power | 30W |
| Rated Voltage | 24V |
Solution photographs
Gear motor parameters and drawings
| Model | Equipment ratio | Output torque Max.(NM) | Rated rotational speed(RPM) | Matched Driver |
| 42FGE03U-42BLF0330-24-01A | 1:3 | .27 | 1000 | BLD70 BLD120A |
| 42FGE04U-42BLF0330-24-01A | 1:four | .36 | 750 | |
| 42FGE05U-42BLF0330-24-01A | 1:5 | .forty five | 600 | |
| 42FGE07U-42BLF0330-24-01A | 1:seven | .63 | 428.six | |
| 42FGE10U-42BLF0330-24-01A | one:10 | .nine | 300 | |
| 42FGE20U-42BLF0330-24-01A | one:twenty | 1.6 | 150 | |
| 42FGE25U-42BLF0330-24-01A | one:25 | two | one hundred twenty | |
| 42FGE50U-42BLF0330-24-01A | 1:fifty | 4 | sixty |
| Product | Gear ratio | Output torque Max.(NM) | Rated rotational velocity(RPM) | Matched Driver |
| 42FGE03U-42BLF0630-24-01A | one:3 | .fifty four | a thousand | BLD70 BLD120A |
| 42FGE04U-42BLF0630-24-01A | 1:4 | .seventy two | 750 | |
| 42FGE05U-42BLF0630-24-01A | 1:5 | .9 | 600 | |
| 42FGE07U-42BLF0630-24-01A | 1:7 | 1.26 | 428.6 | |
| 42FGE10U-42BLF0630-24-01A | one:ten | 1.8 | 300 | |
| 42FGE20U-42BLF0630-24-01A | one:20 | three.two | one hundred fifty | |
| 42FGE25U-42BLF0630-24-01A | 1:twenty five | four | a hundred and twenty | |
| 42FGE50U-42BLF0630-24-01A | one:fifty | 8 | 60 |
| Model | Flange | Output energy(W) | Voltage(VDC) | Revolving speed(RPM) | Rated torque(NM) | Motoer duration L(mm) |
| 42BLF0330 | 42mm | thirty | 24 | 3000 | .1 | forty nine |
| 42BLF0630 | 42mm | 62 | 24 | 3000 | .2 | 68 |
| SERIE | STAGE | RATIO | BACKLASH | EFFICENCE | NOISE |
| 42FG | 1 | 1:3 1:4 1:5 1:10 | ≤15 arcmin | 96% | ≤40db |
| 2 | 1:20 1:twenty five 1:fifty | ≤ C45 steel Motorcycle sprocket CDT for Honda twenty arcmin | 94% | ≤40db | |
| 57FG | 1 | 1:4 1:5 1:7 1:ten | ≤30 arcmin | 90% | ≤45db |
| 2 | 1:twenty 1:25 1:fifty | ≤45 arcmin | 80% | ≤45db | |
| 86FG | 1 | 1:3 1:4 1:5 1:7 1:10 | ≤10 arcmin | 95% | ≤45db |
| two | 1:20 1:35 1:fifty | ≤15 arcmin | ninety% | ≤45db |
Firm Information
one. Can you make the gearbox or gearmotor with custom made requirements?Of course. We have strong R& Solid crank arm metal link and plastic chain protect Scorching promoting bicycle sprockets D capacity, also a excellent expression of engineers, each of them have a lot of perform many years knowledge.
2. Do you give the samples?Sure. Our organization can provide the samples to you.
3.Do you provide engineering support?Yes. Our company have robust R&D functionality, we can give engineering assist if you require.
four. why must you get from us not from other suppliers?Specialist 1-to-1 motor custom-made . The world’s massive organization of option for high high quality suppliers . ISO9001:2008 high quality administration method certification, by means of the CE, ROHS certification.
5. How to ship to us?We will ship the samples to you in accordance to the DHL or UPS or FEDEX etc account you give.
6. How can I know the merchandise is suited for me?Frist, you want to provide us the more information data about the item. We will suggest the product to you in accordance to your prerequisite of specification. Soon after you validate, we will prepare the samples to you. also we will offer you some great developments in accordance to your solution use.
What is a worm gear reducer gearbox?
The worm gear reducer gearbox is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer gearbox
Worm gear reducer gearbox is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducer gearboxes are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducer gearboxes are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer gearbox is the multi-stage variety. This gear reducer gearbox has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer gearbox has low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducer gearboxes that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer gearbox has the characteristics of lower price and better torque output.
Agknx worm gear
The Agknx type worm gear reducer gearbox has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the Agknx worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The Agknx worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducer gearboxes are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer gearbox stems from Sumitomo Heavy Industries’ extensive experience in gear reducer gearboxes. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Agknx worm gear reducer gearboxes are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
Double throat worm gear
There are a few things to consider when choosing a dual-throat worm gear. First, the diameter of the root circle must match the circle pitch of the larger gear. This measurement is usually done by measuring the distance between adjacent teeth. Alternatively, the worm’s normal module can be used. It is the value entered in the worm module dialog. In addition, the axial pitch of the worm should be equal to the pitch diameter of the circular pitch.
Double-throat worm gears are an excellent choice for heavy and heavy-duty applications. The design of this worm gear is ideal for heavy-duty applications as it provides a tighter connection between the worm and the gear. It is also more compact than other types of gear and is comparable to a fine-pitch lead screw.
The efficiency of a double-throat worm gear depends on the material of the gear and worm. Typically, gears are made of case-hardened steel, while worm gears are made of bronze or cast iron. In some cases, a combination of cast iron and bronze can be used.
The deflection of the worm shaft is also affected by the tooth parameters. Tooth height, pressure angle, and size factors all affect the deflection of the worm shaft. In addition, the number of worm threads is another important parameter that affects the deflection of the worm shaft.
Double-throat worm gears are commonly used in industrial applications where high drive reduction is required. The worm has a concave and internal tooth structure that can be adjusted to achieve various ratios. Worm gears and worm gear assemblies must be properly mounted on their shafts to prevent back drive.
Brass worm gear
The basic working principle of the brass worm gear reducer gearbox is the same as that of the traditional worm gear reducer gearbox. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducer gearboxes are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducer gearboxes with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducer gearboxes are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer gearbox is designed for low to medium-horsepower applications. This gear reducer gearbox is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducer gearboxes.
Brass worm gear
Brass worm gear reducer gearbox is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer gearbox also has the ability to generate high torque. However, it is important to understand that this gear reducer gearbox has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer gearbox is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Worm gears are used in many consumer and industrial applications and have high reduction ratios. These gears are produced in various configurations and sizes. Worm gears are similar to spur gears but have non-parallel shafts. Worm gears are also suitable for applications requiring low output speed but high torque.
Worm gears have some distinct advantages over other gears. First, unlike standard gears, the worm rotates in a worm-like motion. This mechanism prevents reverse movement. This is because the lead angle of the worm gear is small. Additionally, the worms self-lock, helping to prevent reversal. However, this mechanism is not entirely reliable. Worm gears can be found in elevators, fishing reels, sprockets, and automotive power steering.
Another advantage of worm gears is that they are easy to manufacture. The rationale behind this design is to have two mutually perpendicular axes. Then, two or more threads are added to the worm gear. The common tangent between these two shafts intersects the pitch line of the worm gear shaft. This is the basis of transfer speed.
editor by Cx 2023-06-21
China 2021 Wholesale Customized Good Quality reduction gearbox speed reducer motor right angle gear box worm gear backdrive
2023-06-16
China 0.12-160KW Reducer Nord Gear Units Gearbox Gear Motor Speed Controller Gearbox Unit combined worm gearbox
2023-06-15