EP-NMRV-E063 Aluminium Worm Gearbox

🔗蜗杆导向尾部输出轴——关键区别因素

The defining feature of the NMRV-E063 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.

🖼 Print-Line Precision

The NMRV-E063 is particularly valued in printing and packaging lines where the IEC flange motor drives the print roll while the tail shaft encoder provides the master speed reference signal for digital register control.

◯ Same Torque as Standard NMRV063

The NMRV-E063 delivers identical maximum output torque (5,595 N·m) to the standard NMRV063, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.

编码器和反馈就绪

尾部输出轴为旋转编码器、测速发电机和脉冲发生器提供了直接连接点，这些设备用于在闭环运动控制系统中监测蜗杆轴的速度，从而无需外部编码器支架和联轴器硬件。

🚫 IP54 — 双重密封完整性

主输出孔和尾轴出口均采用双接触唇形密封件密封，在所有安装方向上均保持 IP54 防护等级，且在任何轴接口处均无漏油现象。

🖼 Print Line Master Reference Shaft

NMRV-E063 worm gearbox where the tail shaft serves as the master reference speed shaft for a multi-section printing press, providing a clean encoder signal isolated from the print-roll mechanical loads.

🌿 Precision Agricultural Seeding

Medium-duty worm gear reducer with tail output shaft for precision agricultural seeding and fertiliser application equipment where GPS-linked controllers require accurate shaft speed feedback for variable-rate application.

⚙ Automation Line Synchronisation

Industrial worm gearmotor with tail shaft for central-line-shaft automation systems where the tail-mounted tachogenerator provides the supervisory controller with a line-speed reference signal.

💧 Water & Wastewater Monitoring

Corrosion-resistant NMRV-E worm gear reducer with tail output shaft for instrumented valve actuator drives in water treatment plants, where the tail shaft pulse counter confirms valve position remotely.

★★★★★

“Our precision conveyor line uses eight NMRV-E063 units. The tail shaft encoders synchronise all eight drives via our central motion controller. Line synchronisation is perfect and we have logged zero registration errors across six months of production.”

Lars H. — Systems Engineer, Automation OEM 🇸🇪 Sweden

★★★★★

“We use the NMRV-E063 on our grain auger with real-time rotation monitoring. The tail-shaft sensor triggers a bin-full alarm when rotation speed drops below a threshold. This simple feature has prevented two auger jam incidents already.”

Darren K. — Farm Manager, Grain Storage 🇦🇺 Australia (WA)

★★★★☆

“The NMRV-E063 drives our packaging line with tail-shaft encoder feedback to our servo master controller. Product count accuracy improved to 100% and we eliminated all the over-run stops that wasted packaging material.”

Yuki H. — Process Engineer, Packaging Plant 🇯🇵 Japan

⚡ IEC电机（B5/B14）

标准交流电机，配有匹配的IEC法兰。另有VFD变频器版本，可实现变速控制。

🔗 输出轴套件

单端实心（DZ）、双端（SZ）、输出法兰（F）、空心法兰（FL）——所有 H7/h6 公差，带标准键槽。

🔨扭力臂和支架

用于轴安装配置的钢制扭矩反作用臂；用于 B3/B6 方向的底座安装板。

🔒密封和呼吸套件

更换唇形密封件套件、通气塞和磁性放油塞，延长保养周期。