Keterangan
EP-NRV-E050 — Shaft-Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NRV-E050
| Parameter | Nilai |
|---|---|
| Seri | NRV-E (Solid Shaft Input, No Flange, Worm-Direction Tail Output Shaft) |
| Jarak Pusat | 0,050 mm |
| Rasio Pengurangan | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Daya Masukan Terukur | Hingga 1,1 kW |
| Rentang Kecepatan Keluaran | 14 hingga 280 r/min (pada input 1400 r/min) |
| Torsi Keluaran Maksimum | 4.280 N·m |
| Konfigurasi Masukan | Solid shaft input (no IEC flange) + worm-direction tail output shaft |
| Poros Masukan | Solid keyed shaft input |
| Poros Keluaran Ekor | Arah ulir (sejajar dengan poros ulir, ujung berlawanan) |
| Bahan Perumahan | Paduan aluminium cor |
| Bahan Roda Cacing | Perunggu fosfor |
| Bahan Poros Cacing | Baja paduan 20CrMnTi, dikeraskan permukaannya, digiling dengan presisi. |
| Diameter Lubang Keluaran | 25 mm H7 dengan alur kunci |
| Pelumasan | Oli gir ISO VG 220 (diisi dari pabrik) |
| Posisi Pemasangan | B3, B6, B7, B8, V5, V6 |
| Kelas Perlindungan | IP54 |
| Suhu Sekitar | -10°C hingga +40°C |
NRV-E050 Performance Table (1.1 kW / 1400 r/min)
| Rasio (i) | Kecepatan Keluaran (r/min) | Torsi Keluaran (N·m) | Faktor Layanan (fs) |
|---|---|---|---|
| 7.5 | 187 | 683 | 2.3 |
| 10 | 140 | 752 | 1.8 |
| 15 | 93 | 861 | 1.3 |
| 20 | 70 | 948 | 1.0 |
| 30 | 47 | 1,085 | 1.0 |
| 40 | 35 | 2,475 | 2.1 |
| 50 | 28 | 2,865 | 2.3 |
| 60 | 23 | 3,153 | 1.7 |
| 80 | 18 | 3,610 | 1.6 |
| 100 | 14 | 4,280 | 1.4 |
✅ Fitur Utama & Manfaat Unik
🔗 Poros Keluaran Ekor Arah Cacing — Pembeda Utama
The defining feature of the NRV-E050 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🅆 PTO Drive + Safety Monitoring
The NRV-E050 accepts PTO chain or belt input up to 1.1 kW while the tail shaft provides the rotation monitoring output for safety interlock systems — critical for grain dryer conveyor safety in Australian agriculture.
◯ Same Torque as Standard NRV050
The NRV-E050 delivers identical maximum output torque (4,280 N·m) to the standard NRV050, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Encoder & Feedback Siap
Poros keluaran ekor menyediakan titik koneksi langsung untuk encoder putar, tachogenerator, dan generator pulsa yang memantau kecepatan poros cacing dalam sistem kontrol gerak loop tertutup, sehingga menghilangkan braket encoder eksternal dan perangkat keras kopling.
🚫 IP54 — Integritas Segel Ganda
Baik lubang keluaran utama maupun lubang keluar poros ekor disegel dengan segel bibir kontak ganda, mempertahankan perlindungan IP54 di semua orientasi pemasangan tanpa kebocoran oli pada antarmuka poros mana pun.
🏭 Skenario Aplikasi
🚮 Kontrol Konveyor Sistem Tertutup
Gearbox cacing NMRV-E050 untuk penggerak konveyor berat di mana poros ekor dipasangi tachogenerator yang memberikan umpan balik kecepatan ke pengontrol VFD, memungkinkan pengaturan kecepatan sabuk yang presisi di bawah beban variabel.
⚙ Pemantauan Mixer Industri
Reducer roda gigi cacing tugas berat dengan poros keluaran ekor untuk penggerak mixer industri di mana sinyal kecepatan poros ekor memantau rotasi poros cacing, mendeteksi kondisi macet pada campuran dengan viskositas tinggi.
💧 Penggerak Instrumen Pengolahan Air
Gearbox cacing aluminium dengan poros ekor untuk penggerak saringan filter kecepatan rendah dan pengikis lumpur, di mana penghitung pulsa yang terpasang di bagian ekor memberikan konfirmasi rotasi secara real-time kepada tim operasi.
📦 Kontrol Register Garis Cetak
Kotak roda gigi reduksi cacing dengan keluaran ekor untuk penggerak bagian mesin cetak gravure di mana encoder poros ekor menyediakan referensi kecepatan jalur utama untuk sistem kontrol register digital.
🔎 Panduan Seleksi
Worked Example — Grain Dryer Safety Interlock
Required: NRV-E050 at i=30, chain-driven from 1.1 kW engine countershaft, tail shaft to safety PLC rotation sensor. Output speed = 47 r/min, torque = 1,085 N·m. Tail shaft: proximity sensor target disk, 25 mm bore. ✅ NRV-E050-30 selected.
⚖ NRV-E050 vs Standard NRV050
| Fitur | EP-NRV-E050 (with Tail Shaft) | EP-NRV050 (Standard) |
|---|---|---|
| Poros Keluaran Ekor | ✅ Ya — arah cacing | TIDAK |
| Pemasangan Encoder / Umpan Balik | Langsung pada poros ekor | Membutuhkan braket eksternal |
| Penggerak Beban Ganda | Ya — utama + ekor | Tidak — hanya keluaran tunggal |
| Torsi Keluaran Utama | 4.280 N·m | 4.280 N·m |
| Dimensi Perumahan | Sedikit lebih panjang (tonjolan batang ekor) | Panjang standar |
| Shaft Input | Yes — solid keyed shaft | Yes — solid keyed shaft |
NRV-E050 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Alur kunci |
|---|---|---|---|---|---|---|
| 92 | 99 | 153 | 199 | 8 | 25 | M10 |
❓ Pertanyaan yang Sering Diajukan
What is the tail output shaft on the EP-NRV-E050 and how is it different from the main output?
The tail shaft on the NRV-E050 exits the housing in the worm-direction axis (opposite end of the worm shaft), while the main output bore is perpendicular (90 degrees) to the worm axis. The tail shaft is driven off the worm shaft end and is used for encoder mounting, tachometer connection, or light auxiliary drive, while the main output delivers the full 4,280 N·m load torque.
Does the tail shaft reduce the main output torque of the NRV-E050?
No. The tail shaft draws only the small torque needed for its connected device. The main output retains the full 4,280 N·m rating, identical to the standard NRV050.
What is the input shaft specification for the NRV-E050?
The NRV-E050 has a solid keyed input shaft (no IEC flange). The shaft diameter matches the equivalent NMRV050 bore input diameter. It accepts chain sprockets, belt pulleys, and rigid couplings. A bilateral (double-ended) input shaft is standard; single-end configuration available on request.
What encoder types can be mounted on the NRV-E050 tail shaft?
Any standard keyed rotary encoder with the matching bore diameter can be mounted on the NRV-E050 tail shaft: incremental (5V–24V, 100–10,000 PPR), SSI absolute, or resolver-type. Confirm the encoder bore size and keyway before ordering. The tail shaft key dimensions match the catalogue DZ shaft specification for NMRV-E050.
Can the NRV-E050 be used for closed-loop speed control in a chain-driven system?
Yes. The NRV-E050 is the ideal solution for chain-driven systems requiring closed-loop speed feedback. The chain drives the solid input shaft; the main output drives the load; and the tail shaft mounts an encoder that feeds speed/position data back to the controller. This eliminates the need for a separate encoder mounting bracket or a second independent encoder drive arrangement.
⭐ Ulasan Pelanggan
★★★★★
“Our grain-dryer fan conveyor uses NRV-E050 chain-driven from the dryer main shaft. The tail-shaft encoder confirms rotation to our dryer management PLC and automatically shuts down the burner if the conveyor stops. A safety-critical feature that works perfectly.”
Peter N. — Farm Operations Manager 🇦🇺 Australia (QLD)
★★★★★
“We chain-drive NRV-E050 units on our food-plant batch conveyors. The tail-shaft tachometer signal integrates with our HACCP batch tracking system, recording conveyor speed for every production run. Exactly the audit trail we needed.”
Thomas W. — Plant Engineer, Food Manufacturer 🇬🇧 UK
★★★★☆
“The NRV-E050 drives our irrigation pump chain drive and the tail shaft monitors pump rotation for our SCADA. We now get automatic alerts if the pump stops during an irrigation cycle. The combined chain-input encoder-output design simplified our installation considerably.”
Helen M. — Farm Manager, Horticulture 🇦🇺 Australia (WA)
⚙ Aksesoris & Produk yang Kompatibel
⚡ Motor IEC (B5/B14)
Motor AC standar dengan flensa IEC yang sesuai. Tersedia versi inverter VFD untuk kontrol kecepatan variabel.
🔗 Kit Poros Output
Padat tunggal (DZ), ujung ganda (SZ), flensa keluaran (F), flensa berongga (FL) — semuanya dengan toleransi H7/h6 dan alur pasak standar.
🔨 Lengan dan Braket Torsi
Lengan penahan torsi baja untuk konfigurasi pemasangan poros; pelat pemasangan kaki untuk orientasi B3/B6.
🔒 Kit Segel & Ventilasi
Kit pengganti seal bibir, sumbat ventilasi, dan sumbat pembuangan magnetik untuk interval servis yang lebih panjang.
Enquire About EP-NRV-E050
Our team will confirm the input shaft specification, ratio, and safety encoder arrangement for your chain-driven agricultural or industrial application.
Itu EP-NRV-E050 aluminium worm gearbox combines a solid shaft input (no IEC flange) with an additional worm-direction tail output shaft. Centre distance 050 mm, ratios 5 to 100, input power up to 1.1 kW, max output torque 4,280 N·m. The tail shaft enables simultaneous encoder feedback, safety interlock monitoring, or auxiliary drive — the ideal instrumented shaft-input worm gearbox for chain-driven closed-loop agricultural, industrial, and mining drive systems.
