Descripción
EP-NRV-E050 — Shaft-Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NRV-E050
| Parámetro | Valor |
|---|---|
| Serie | NRV-E (Solid Shaft Input, No Flange, Worm-Direction Tail Output Shaft) |
| Distancia al centro | 050 mm |
| Índices de reducción | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Potencia de entrada nominal | Hasta 1,1 kW |
| Rango de velocidad de salida | De 14 a 280 r/min (con una entrada de 1400 r/min) |
| Par máximo de salida | 4280 N·m |
| Configuración de entrada | Solid shaft input (no IEC flange) + worm-direction tail output shaft |
| Eje de entrada | Solid keyed shaft input |
| Eje de salida de cola | Dirección del tornillo sin fin (coaxial con el eje del tornillo sin fin, extremo opuesto) |
| Material de vivienda | Aleación de aluminio fundido a presión |
| Material de la rueda helicoidal | Bronce fosforoso |
| Material del eje del tornillo sin fin | Acero aleado 20CrMnTi, cementado, rectificado de precisión |
| Diámetro del orificio de salida | 25 mm H7 with keyway |
| Lubricación | Aceite para engranajes ISO VG 220 (envasado de fábrica) |
| Posiciones de montaje | B3, B6, B7, B8, V5, V6 |
| Clase de protección | IP54 |
| Temperatura ambiente | -10°C a +40°C |
NRV-E050 Performance Table (1.1 kW / 1400 r/min)
| Relación (i) | Velocidad de salida (r/min) | Par de salida (N·m) | Factor de servicio (fs) |
|---|---|---|---|
| 7.5 | 187 | 683 | 2.3 |
| 10 | 140 | 752 | 1.8 |
| 15 | 93 | 861 | 1.3 |
| 20 | 70 | 948 | 1.0 |
| 30 | 47 | 1,085 | 1.0 |
| 40 | 35 | 2,475 | 2.1 |
| 50 | 28 | 2,865 | 2.3 |
| 60 | 23 | 3,153 | 1.7 |
| 80 | 18 | 3,610 | 1.6 |
| 100 | 14 | 4,280 | 1.4 |
✅ Características principales y beneficios únicos
🔗 Eje de salida de cola con giro sinusoidal: el factor diferenciador clave
The defining feature of the NRV-E050 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🅆 PTO Drive + Safety Monitoring
The NRV-E050 accepts PTO chain or belt input up to 1.1 kW while the tail shaft provides the rotation monitoring output for safety interlock systems — critical for grain dryer conveyor safety in Australian agriculture.
◯ Same Torque as Standard NRV050
The NRV-E050 delivers identical maximum output torque (4,280 N·m) to the standard NRV050, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Listo para codificador y retroalimentación
El eje de salida trasero proporciona un punto de conexión directo para codificadores rotativos, tacogeneradores y generadores de impulsos que monitorizan la velocidad del eje sin fin en sistemas de control de movimiento de bucle cerrado, eliminando los soportes externos para codificadores y los componentes de acoplamiento.
🚫 IP54 — Integridad con doble sellado
Tanto el orificio de salida principal como la salida del eje de cola están sellados con juntas labiales de doble contacto, lo que mantiene la protección IP54 en todas las orientaciones de montaje sin que se produzcan fugas de aceite en ninguna de las interfaces del eje.
🏭 Escenarios de aplicación
🚮 Closed-Loop Conveyor Control
NMRV-E050 worm gearbox for heavy conveyor drives where the tail shaft mounts a tachogenerator providing speed feedback to a VFD controller, enabling precise belt speed regulation under variable load.
⚙ Industrial Mixer Monitoring
Heavy-duty worm gear reducer with tail output shaft for industrial mixer drives where the tail shaft speed signal monitors worm shaft rotation, detecting stall conditions in high-viscosity batches.
💧 Water Treatment Instrumented Drives
Aluminium worm gearbox with tail shaft for slow-speed filter screen and sludge scraper drives where a tail-mounted pulse counter provides the operations team with real-time rotation confirmation.
📦 Print Line Register Control
Worm gear reduction gearbox with tail output for gravure printing press section drives where the tail shaft encoder provides master-line speed reference for digital register control systems.
🔎 Guía de selección
Worked Example — Grain Dryer Safety Interlock
Required: NRV-E050 at i=30, chain-driven from 1.1 kW engine countershaft, tail shaft to safety PLC rotation sensor. Output speed = 47 r/min, torque = 1,085 N·m. Tail shaft: proximity sensor target disk, 25 mm bore. ✅ NRV-E050-30 selected.
⚖ NRV-E050 vs Standard NRV050
| Característica | EP-NRV-E050 (with Tail Shaft) | EP-NRV050 (Standard) |
|---|---|---|
| Eje de salida de cola | ✅ Sí — dirección del gusano | No |
| Montaje del codificador/retroalimentación | Directamente en el eje de cola | Requiere soporte externo |
| Accionamiento de doble carga | Sí — principal + cola | No, solo una salida |
| Par de salida principal | 4280 N·m | 4280 N·m |
| Dimensiones de la vivienda | Ligeramente más largo (protuberancia del eje de la cola) | Longitud estándar |
| Entrada del eje | Yes — solid keyed shaft | Yes — solid keyed shaft |
NRV-E050 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/Zona superficial (mm) | b2 (mm) | d h6 (mm) | Ranura para llave |
|---|---|---|---|---|---|---|
| 92 | 99 | 153 | 199 | 8 | 25 | M10 |
❓ Preguntas frecuentes
What is the tail output shaft on the EP-NRV-E050 and how is it different from the main output?
The tail shaft on the NRV-E050 exits the housing in the worm-direction axis (opposite end of the worm shaft), while the main output bore is perpendicular (90 degrees) to the worm axis. The tail shaft is driven off the worm shaft end and is used for encoder mounting, tachometer connection, or light auxiliary drive, while the main output delivers the full 4,280 N·m load torque.
Does the tail shaft reduce the main output torque of the NRV-E050?
No. The tail shaft draws only the small torque needed for its connected device. The main output retains the full 4,280 N·m rating, identical to the standard NRV050.
What is the input shaft specification for the NRV-E050?
The NRV-E050 has a solid keyed input shaft (no IEC flange). The shaft diameter matches the equivalent NMRV050 bore input diameter. It accepts chain sprockets, belt pulleys, and rigid couplings. A bilateral (double-ended) input shaft is standard; single-end configuration available on request.
What encoder types can be mounted on the NRV-E050 tail shaft?
Any standard keyed rotary encoder with the matching bore diameter can be mounted on the NRV-E050 tail shaft: incremental (5V–24V, 100–10,000 PPR), SSI absolute, or resolver-type. Confirm the encoder bore size and keyway before ordering. The tail shaft key dimensions match the catalogue DZ shaft specification for NMRV-E050.
Can the NRV-E050 be used for closed-loop speed control in a chain-driven system?
Yes. The NRV-E050 is the ideal solution for chain-driven systems requiring closed-loop speed feedback. The chain drives the solid input shaft; the main output drives the load; and the tail shaft mounts an encoder that feeds speed/position data back to the controller. This eliminates the need for a separate encoder mounting bracket or a second independent encoder drive arrangement.
⭐ Opiniones de los clientes
★★★★★
“Our grain-dryer fan conveyor uses NRV-E050 chain-driven from the dryer main shaft. The tail-shaft encoder confirms rotation to our dryer management PLC and automatically shuts down the burner if the conveyor stops. A safety-critical feature that works perfectly.”
Peter N. — Farm Operations Manager 🇦🇺 Australia (QLD)
★★★★★
“We chain-drive NRV-E050 units on our food-plant batch conveyors. The tail-shaft tachometer signal integrates with our HACCP batch tracking system, recording conveyor speed for every production run. Exactly the audit trail we needed.”
Thomas W. — Plant Engineer, Food Manufacturer 🇬🇧 UK
★★★★☆
“The NRV-E050 drives our irrigation pump chain drive and the tail shaft monitors pump rotation for our SCADA. We now get automatic alerts if the pump stops during an irrigation cycle. The combined chain-input encoder-output design simplified our installation considerably.”
Helen M. — Farm Manager, Horticulture 🇦🇺 Australia (WA)
⚙ Accesorios y productos compatibles
⚡ Motores IEC (B5/B14)
Motores de CA estándar con brida IEC compatible. Disponibles versiones para variadores de frecuencia (VFD) para control de velocidad variable.
🔗 Kits de eje de salida
Brida simple maciza (DZ), brida de doble extremo (SZ), brida de salida (F), brida hueca (FL): todas con tolerancia H7/h6 y chaveteros estándar.
🔨 Brazos y soportes de torsión
Brazos de reacción de torsión de acero para configuraciones de montaje en eje; placas de montaje en base para orientaciones B3/B6.
🔒 Kits de sellado y ventilación
Kits de repuesto de juntas labiales, tapones de ventilación y tapones de drenaje magnéticos para intervalos de servicio prolongados.
Enquire About EP-NRV-E050
Our team will confirm the input shaft specification, ratio, and safety encoder arrangement for your chain-driven agricultural or industrial application.
El EP-NRV-E050 aluminium worm gearbox combines a solid shaft input (no IEC flange) with an additional worm-direction tail output shaft. Centre distance 050 mm, ratios 5 to 100, input power up to 1.1 kW, max output torque 4,280 N·m. The tail shaft enables simultaneous encoder feedback, safety interlock monitoring, or auxiliary drive — the ideal instrumented shaft-input worm gearbox for chain-driven closed-loop agricultural, industrial, and mining drive systems.
