Descrição
EP-NRV-E050 — Shaft-Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NRV-E050
| Parâmetro | Valor |
|---|---|
| Série | NRV-E (Eixo de entrada sólido, sem flange, eixo de saída com rotação helicoidal) |
| Distância do centro | 050 mm |
| Taxas de redução | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Potência de entrada nominal | Até 1,1 kW |
| Faixa de velocidade de saída | 14 a 280 rpm (com entrada de 1400 rpm) |
| Torque máximo de saída | 4.280 N·m |
| Configuração de entrada | Eixo de entrada maciço (sem flange IEC) + eixo de saída helicoidal com rotação sem-fim |
| Eixo de entrada | entrada de eixo maciço com chaveta |
| Eixo de saída da cauda | Direção do parafuso sem-fim (coaxial com o eixo do parafuso sem-fim, extremidade oposta) |
| Material de construção | Liga de alumínio fundido |
| Material da roda sem-fim | Bronze fosforoso |
| Material do eixo sem-fim | Aço liga 20CrMnTi, cementado, retificado com precisão |
| Diâmetro do furo de saída | 25 mm H7 with keyway |
| Lubrificação | Óleo de engrenagem ISO VG 220 (adicionado de fábrica) |
| Posições de montagem | B3, B6, B7, B8, V5, V6 |
| Classe de proteção | IP54 |
| Temperatura ambiente | -10°C a +40°C |
NRV-E050 Performance Table (1.1 kW / 1400 r/min)
| Razão (i) | Velocidade de saída (rpm) | Torque de saída (N·m) | Fator de serviço (fs) |
|---|---|---|---|
| 7.5 | 187 | 683 | 2.3 |
| 10 | 140 | 752 | 1.8 |
| 15 | 93 | 861 | 1.3 |
| 20 | 70 | 948 | 1.0 |
| 30 | 47 | 1,085 | 1.0 |
| 40 | 35 | 2,475 | 2.1 |
| 50 | 28 | 2,865 | 2.3 |
| 60 | 23 | 3,153 | 1.7 |
| 80 | 18 | 3,610 | 1.6 |
| 100 | 14 | 4,280 | 1.4 |
✅ Principais funcionalidades e benefícios exclusivos
🔗 Eixo de saída com rotação helicoidal — O principal diferencial
The defining feature of the NRV-E050 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🅆 PTO Drive + Safety Monitoring
The NRV-E050 accepts PTO chain or belt input up to 1.1 kW while the tail shaft provides the rotation monitoring output for safety interlock systems — critical for grain dryer conveyor safety in Australian agriculture.
◯ Same Torque as Standard NRV050
The NRV-E050 delivers identical maximum output torque (4,280 N·m) to the standard NRV050, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Pronto para Encoder e Feedback
O eixo de saída traseiro fornece um ponto de conexão direta para encoders rotativos, tacogeradores e geradores de pulsos que monitoram a velocidade do eixo sem-fim em sistemas de controle de movimento de circuito fechado, eliminando suportes de encoder externos e componentes de acoplamento.
🚫 IP54 — Integridade com Vedação Dupla
Tanto o furo de saída principal quanto a saída do eixo de cauda são vedados com vedações labiais de contato duplo, mantendo a proteção IP54 em todas as orientações de montagem, sem vazamento de óleo em nenhuma das interfaces do eixo.
🏭 Cenários de Aplicação
🚮 Closed-Loop Conveyor Control
NMRV-E050 worm gearbox for heavy conveyor drives where the tail shaft mounts a tachogenerator providing speed feedback to a VFD controller, enabling precise belt speed regulation under variable load.
⚙ Industrial Mixer Monitoring
Heavy-duty worm gear reducer with tail output shaft for industrial mixer drives where the tail shaft speed signal monitors worm shaft rotation, detecting stall conditions in high-viscosity batches.
💧 Water Treatment Instrumented Drives
Aluminium worm gearbox with tail shaft for slow-speed filter screen and sludge scraper drives where a tail-mounted pulse counter provides the operations team with real-time rotation confirmation.
📦 Print Line Register Control
Worm gear reduction gearbox with tail output for gravure printing press section drives where the tail shaft encoder provides master-line speed reference for digital register control systems.
🔎 Guia de Seleção
Worked Example — Grain Dryer Safety Interlock
Required: NRV-E050 at i=30, chain-driven from 1.1 kW engine countershaft, tail shaft to safety PLC rotation sensor. Output speed = 47 r/min, torque = 1,085 N·m. Tail shaft: proximity sensor target disk, 25 mm bore. ✅ NRV-E050-30 selected.
⚖ NRV-E050 vs Standard NRV050
| Recurso | EP-NRV-E050 (with Tail Shaft) | EP-NRV050 (Standard) |
|---|---|---|
| Eixo de saída da cauda | ✅ Sim — direção da minhoca | Não |
| Montagem do codificador/feedback | Diretamente no eixo da cauda | Requer suporte externo |
| Acionamento de carga dupla | Sim — principal + cauda | Não — apenas uma saída |
| Torque de saída principal | 4.280 N·m | 4.280 N·m |
| Dimensões da Habitação | Ligeiramente mais comprido (protrusão da haste caudal) | Comprimento padrão |
| Entrada do eixo | Sim — eixo com chaveta maciça | Sim — eixo com chaveta maciça |
NRV-E050 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Chaveta |
|---|---|---|---|---|---|---|
| 92 | 99 | 153 | 199 | 8 | 25 | M10 |
❓ Perguntas Frequentes
What is the tail output shaft on the EP-NRV-E050 and how is it different from the main output?
The tail shaft on the NRV-E050 exits the housing in the worm-direction axis (opposite end of the worm shaft), while the main output bore is perpendicular (90 degrees) to the worm axis. The tail shaft is driven off the worm shaft end and is used for encoder mounting, tachometer connection, or light auxiliary drive, while the main output delivers the full 4,280 N·m load torque.
Does the tail shaft reduce the main output torque of the NRV-E050?
No. The tail shaft draws only the small torque needed for its connected device. The main output retains the full 4,280 N·m rating, identical to the standard NRV050.
What is the input shaft specification for the NRV-E050?
The NRV-E050 has a solid keyed input shaft (no IEC flange). The shaft diameter matches the equivalent NMRV050 bore input diameter. It accepts chain sprockets, belt pulleys, and rigid couplings. A bilateral (double-ended) input shaft is standard; single-end configuration available on request.
What encoder types can be mounted on the NRV-E050 tail shaft?
Any standard keyed rotary encoder with the matching bore diameter can be mounted on the NRV-E050 tail shaft: incremental (5V–24V, 100–10,000 PPR), SSI absolute, or resolver-type. Confirm the encoder bore size and keyway before ordering. The tail shaft key dimensions match the catalogue DZ shaft specification for NMRV-E050.
Can the NRV-E050 be used for closed-loop speed control in a chain-driven system?
Yes. The NRV-E050 is the ideal solution for chain-driven systems requiring closed-loop speed feedback. The chain drives the solid input shaft; the main output drives the load; and the tail shaft mounts an encoder that feeds speed/position data back to the controller. This eliminates the need for a separate encoder mounting bracket or a second independent encoder drive arrangement.
⭐ Avaliações de clientes
★★★★★
“Our grain-dryer fan conveyor uses NRV-E050 chain-driven from the dryer main shaft. The tail-shaft encoder confirms rotation to our dryer management PLC and automatically shuts down the burner if the conveyor stops. A safety-critical feature that works perfectly.”
Peter N. — Farm Operations Manager 🇦🇺 Australia (QLD)
★★★★★
“We chain-drive NRV-E050 units on our food-plant batch conveyors. The tail-shaft tachometer signal integrates with our HACCP batch tracking system, recording conveyor speed for every production run. Exactly the audit trail we needed.”
Thomas W. — Plant Engineer, Food Manufacturer 🇬🇧 UK
★★★★☆
“The NRV-E050 drives our irrigation pump chain drive and the tail shaft monitors pump rotation for our SCADA. We now get automatic alerts if the pump stops during an irrigation cycle. The combined chain-input encoder-output design simplified our installation considerably.”
Helen M. — Farm Manager, Horticulture 🇦🇺 Australia (WA)
⚙ Acessórios e Produtos Compatíveis
⚡ Motores IEC (B5/B14)
Motores CA padrão com flange IEC compatível. Versões para inversores VFD disponíveis para controle de velocidade variável.
🔗 Kits de Eixo de Saída
Simples sólido (DZ), duplo (SZ), flange de saída (F), flange oco (FL) — todos com tolerância H7/h6 e rasgos de chaveta padrão.
🔨 Braços e suportes de torque
Braços de reação de torque em aço para configurações de montagem em eixo; placas de montagem com pés para orientações B3/B6.
🔒 Kits de Vedação e Respiro
Kits de vedação labial de reposição, bujões de respiro ventilados e bujões de drenagem magnéticos para intervalos de manutenção prolongados.
Enquire About EP-NRV-E050
Our team will confirm the input shaft specification, ratio, and safety encoder arrangement for your chain-driven agricultural or industrial application.
O EP-NRV-E050 aluminium worm gearbox combines a solid shaft input (no IEC flange) with an additional worm-direction tail output shaft. Centre distance 050 mm, ratios 5 to 100, input power up to 1.1 kW, max output torque 4,280 N·m. The tail shaft enables simultaneous encoder feedback, safety interlock monitoring, or auxiliary drive — the ideal instrumented shaft-input worm gearbox for chain-driven closed-loop agricultural, industrial, and mining drive systems.
