✉ [email protected] 🏭 NMRV Versnellingsbak — Rechtstreeks van de fabriek
✓ CE & ISO 9001 Verhoudingen 5:1 – 100:1
🔍
📧 Vraag een offerte aan

Wormwielreductor voor voermengers

door | 26 juni 2026 | Landbouw

Wormwielreductor voor voermengers

Wormwielreductor voor voermengers

Feed mixers — vertical auger mixers, horizontal paddle mixers, and reel-type total mixed ration (TMR) wagons — are the central processing equipment in Australian cattle feedlots, sheep stations, and dairy farms. They must mix dry fodder, silage, concentrates, and minerals into a homogeneous ration under varying load conditions, often operating for multiple hours per day. The wormwielreductor provides the low-speed, high-torque drive required by mixing augers and paddles from a standard motor, in a compact sealed unit that requires minimal maintenance and can be serviced on-farm.

Australian livestock properties — particularly remote cattle stations in Queensland and the Northern Territory — often operate feed mixer equipment for months between access to qualified mechanical technicians. The worm reducer’s low-maintenance design — oil-bath lubrication, sealed housing, no chains or belts to adjust — is a significant operational advantage in these remote settings. A single annual oil change and seal inspection is the complete maintenance requirement for most installations.

The self-locking property of worm gearboxes also benefits feed mixer applications: when the drive is stopped between mixing batches, the auger or paddle remains stationary without a brake, preventing the load from slowly rotating under gravity and spilling partial batches during loading or discharge operations.

Industriële toepassingen en gebruiksvoorbeelden

Worm reducers are found throughout feed processing and mixing systems on Australian livestock properties:

  • Vertical auger TMR mixer drive — single or twin auger drive at 20–60 RPM, high starting torque against dense silage
  • Horizontal paddle mixer drive — slow rotary paddle action for gentle mixing of feed components
  • Reel mixer wagon drive — controlled rotation of the mixing reel and discharge conveyor
  • Feed auger hopper discharge drive — controlled volumetric discharge from feed storage hopper
  • Mineral and molasses dosing drive — precise low-speed metering of liquid and solid supplements

Material specification for feed mixer service: Worm shaft in carbon steel with precision-ground helical thread and surface hardening. Worm wheel in cast phosphor bronze — the low friction coefficient is particularly important in feed mixer service where the gearbox may run 4–8 hours per day. Housing in cast iron with heat-dissipation fin casting. IP54 sealing as minimum; IP65 for outdoor feedlot environments exposed to dust storms and rain.

Starting torque requirements: Feed mixers have exceptionally high starting torque requirements — frozen or compacted silage can require 3–5× the running torque to break initial static friction. A service factor of SF=1.5 is recommended for standard feed mixer service, increasing to SF=2.0 for mixers handling frozen feed in winter months.

Worm Gear Reducer for Feed Mixers application

Technische specificaties en selectiegids

Gebruik de onderstaande tabel om het juiste model te selecteren. Belangrijke parameters zijn onder andere de overbrengingsverhouding, het uitgangskoppel, de asafmetingen en het materiaal van de behuizing. Gebruik altijd de juiste tabel. Servicefactor (SF) voor uw inschakelduur.

Parameter Typisch bereik / waarde Selectie-aantekeningen
Verhouding 20:1 – 60:1 typical for mixers Provides 25–70 RPM output from standard 4-pole motor
Uitgangskoppel 200 – 3,000 N·m Apply SF 1.5; increase to 2.0 for cold-start frozen silage duty
Input Shaft IEC B5/B14 flange, IEC 60034 Direct-mount to farm-standard single or three-phase motors
Uitgaande as Solid keyed or hollow bore Hollow bore for direct auger shaft pass-through
Behuizingsmateriaal Cast Iron with fin casting Essential for continuous 4+ hour mixer duty thermal management
Shaft Seals Double-lip NBR; FKM for wet/chemical feed Upgrade to FKM for mixers handling liquid supplements or acids
Beschermingsklasse IP54 indoor; IP65 outdoor feedlot IP65 for dusty Australian feedlot environments

► Servicefactor (SF): Gelijkmatige belasting SF=1,0 | Matige schok SF=1,25–1,5 | Zware schok / 24 uur continu SF=1,75–2,0

► Omgevingstemperatuur: Standaardunits zijn geschikt voor temperaturen van -10°C tot +40°C. Locaties in Australië met hoge omgevingstemperaturen (>45°C) vereisen een smeermiddel voor hoge temperaturen en een thermische reductie volgens de 15%-norm.

NMRV NRV wormwieloverbrenging

NMRV / NRV-serie wormwieloverbrenging

Verkrijgbaar in framematen 025 tot en met 150. Eentraps reductieverhoudingen van 5:1 tot 100:1. Uitgangskoppel tot 4200 N·m. Behuizing van aluminium of nodulair gietijzer. IEC B5/B14 motorflens. IP65 standaard, IP66/IP67 optioneel. Smering met synthetische of minerale olie.

Naleving en kwaliteitsnormen

✓ ISO 9001:2015
Gecertificeerd kwaliteitsmanagementsysteem. Elk geproduceerd en geïnspecteerd product voldoet aan een gedocumenteerd kwaliteitsmanagementsysteem met volledige traceerbaarheid.
✓ CE-certificering
CE-gecertificeerd conform de EU-machinerichtlijn. Breed geaccepteerd in Australische en Nieuw-Zeelandse engineeringprojecten.
✓ IEC 60034 Motorinterface
IEC-standaard flens- en asafmetingen. Directe montage compatibel met alle belangrijke motormerken.
✓ IP65 / IP66 bescherming
Stofdicht en bestand tegen hogedrukspuiten. De standaard voor buiteninstallaties in Australië.

Casestudies

🐄

Case Study 1 — Cattle Feedlot TMR Mixer, Darling Downs QLD

Beef Cattle Feedlot
Vertical Auger TMR Mixer Wagon — 14 m³

Pijnpunt van de klant: A 10,000-head cattle feedlot was experiencing worm gearbox failure every 5–6 months on their TMR mixer wagon. Post-failure inspection consistently showed worm wheel wear concentrated on one side of the tooth face — evidence of misalignment between the gearbox and the auger drive shaft.

Oplossing: NRV-110 worm gearbox (ratio 40:1, SF=1.75, taper roller bearings) plus a flexible jaw coupling between the gearbox output and auger input shaft to absorb residual misalignment.

Resultaat: Worm wheel life extended from 5–6 months to over 22 months at first replacement assessment. The feedlot maintenance manager estimated annual saving of $11,000 in gearbox parts and labour.

🐑

Case Study 2 — Sheep Station Supplementary Feeder, Broken Hill NSW

Sheep Grazing
Horizontal Paddle Feed Mixer — Remote Station

Pijnpunt van de klant: A remote sheep station 180 km from the nearest town was experiencing feed mixer gearbox oil contamination — fine red dust from the arid environment was ingressing through shaft seals, mixing with the mineral oil and causing abrasive wear on the worm shaft thread.

Oplossing: NMRV-090 worm gearbox with IP65 housing, double-lip FKM shaft seals, and synthetic PAO lubricant (5,000-hour change interval) was installed.

Resultaat: No dust contamination events in 30 months of operation and three seasonal inspections. The station owner confirmed the gearbox required only a single oil level check per season.

🥛

Case Study 3 — Dairy Farm Feed Mixer, Gippsland VIC

Dairy Farming
Reel Mixer Wagon — Mixed Dairy TMR

Pijnpunt van de klant: A Gippsland dairy farm’s reel mixer wagon gearbox was experiencing seal failures during winter — cold-start condensation and wet silage splash were forming an oil-water emulsion that accelerated bearing and worm surface corrosion.

Oplossing: NRV series worm gearbox (ratio 30:1, cast iron, double-lip FKM seals, synthetic ISO VG 320, IP65, corrosion-inhibited housing coating) replaced the standard-specification unit.

Resultaat: Oil emulsification eliminated over the first full winter post-installation. Bearing inspection at 12 months showed no corrosion pitting.

Productassortiment wormwieloverbrengingen

Wormwielkasten uit de NMRV/NRV-serie — framegroottes 025 tot 150, geproduceerd volgens ISO 9001:2015

Waarom voor ons kiezen?

🏭

Meer dan 20 jaar productie-ervaring
ISO-gecertificeerde productie sinds 2003. Wormwieloverbrengingen worden naar meer dan 60 landen verzonden.

📞

Technische ondersteuning op afstand
Diagnostiek via videogesprekken over alle Australische tijdzones heen. Snelle respons zonder bezoek ter plaatse.

⚙️

OEM/ODM-maatwerk
Niet-standaard assen, holle boringen, flenzen op maat en overbrengingsverhoudingen. Volledige tekeningbeoordeling beschikbaar.

💰

Fabrieksdirecte waarde
Geen distributiemarge. Transparante volumeprijzen met aanzienlijke kortingen bij herhaalbestellingen.

📦

Voorraad & snelle verzending
Standaard NMRV/NRV-frames op voorraad. Spoedbestellingen worden verwerkt en per exprespost verzonden.

Veelgestelde vragen

▼ What service factor should I use when selecting a worm gearbox for a feed mixer?
Standard feed mixer service: SF=1.5. For mixers handling frozen silage or compacted dense feeds in winter: SF=2.0. For mineral supplement dosing drives with uniform steady load: SF=1.0–1.25. Apply the service factor to the calculated running torque to get the selection torque, then choose a frame with a rated output torque equal to or exceeding the selection torque.
▼ What type of coupling should I use between the worm gearbox and the feed mixer auger shaft?
For vertical auger TMR mixers, a rigid flange coupling or directly bolted hollow bore connection is common, but only if shaft alignment can be maintained within 0.1 mm TIR. Where alignment is difficult to control, a flexible jaw or disc coupling is strongly recommended to absorb angular and parallel misalignment and prevent side-loading the gearbox output bearing.
▼ How long should a worm gearbox last on a feed mixer, and what are early warning signs of failure?
A correctly selected and maintained worm gearbox on a feed mixer should achieve 5,000–10,000 operating hours before worm wheel replacement is required. Early warning signs: (1) oil temperature rising above normal during operation, (2) unusual noise change (whine or rumble), (3) oil discolouration to grey or milky.
▼ Can I use a single-phase motor with a worm gearbox for a small on-farm feed mixer?
Yes — worm gearboxes are motor-agnostic and can be paired with single-phase motors, common on Australian farms without three-phase power supply. Single-phase capacitor-start motors provide high starting torque suitable for the cold-start demands of feed mixers. For mixers above approximately 5 kW, three-phase or generator-fed supply is strongly recommended for adequate starting current.
▼ What is the correct oil viscosity for a feed mixer worm gearbox in Australian conditions?
Mineral oil: ISO VG 220 for ambient temperatures 10–35°C; ISO VG 320 for summer ambient above 35°C. Synthetic PAO: ISO VG 320 covers the full Australian temperature range in a single grade, which simplifies stock management and extends change intervals to 5,000 hours. Avoid gear oils with active sulphur EP additives — these attack the phosphor bronze worm wheel at operating temperatures above 70°C.

Get Feed Mixer Gearbox Selection Advice

Onze ingenieurs staan ​​klaar om u te adviseren over het juiste wormwieloverbrengingsmodel, de juiste overbrengingsverhouding, asconfiguratie en montagemethode voor uw toepassing.

Ontdek meer op de aanvraagpagina of kom meer over ons te weten op de Over ons-pagina.