Keterangan
EP-NRV-E110 — Shaft-Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NRV-E110
| Parameter | Nilai |
|---|---|
| Seri | NRV-E (Solid Shaft Input, No Flange, Worm-Direction Tail Output Shaft) |
| Jarak Pusat | 110 mm |
| Rasio Pengurangan | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Daya Masukan Terukur | Up to 7.5 kW |
| Rentang Kecepatan Keluaran | 14 hingga 280 r/min (pada input 1400 r/min) |
| Torsi Keluaran Maksimum | 9,232 N·m |
| Konfigurasi Masukan | Solid shaft input (no IEC flange) + worm-direction tail output shaft |
| Poros Masukan | Solid keyed shaft input |
| Poros Keluaran Ekor | Arah ulir (sejajar dengan poros ulir, ujung berlawanan) |
| Bahan Perumahan | Paduan aluminium cor |
| Bahan Roda Cacing | Perunggu fosfor |
| Bahan Poros Cacing | Baja paduan 20CrMnTi, dikeraskan permukaannya, digiling dengan presisi. |
| Diameter Lubang Keluaran | 42 mm H7 with keyway |
| Pelumasan | Oli gir ISO VG 220 (diisi dari pabrik) |
| Posisi Pemasangan | B3, B6, B7, B8, V5, V6 |
| Kelas Perlindungan | IP54 |
| Suhu Sekitar | -10°C hingga +40°C |
NRV-E110 Performance Table (7.5 kW / 1400 r/min)
| Rasio (i) | Kecepatan Keluaran (r/min) | Torsi Keluaran (N·m) | Faktor Layanan (fs) |
|---|---|---|---|
| 7.5 | 187 | 2,359 | 2.6 |
| 10 | 140 | 2,597 | 2.0 |
| 15 | 93 | 2,973 | 1.5 |
| 20 | 70 | 3,272 | 1.1 |
| 25 | 56 | 3,509 | 1.1 |
| 30 | 47 | 3,745 | 1.1 |
| 40 | 35 | 4,285 | 1.9 |
| 50 | 28 | 4,905 | 1.4 |
| 60 | 23 | 5,399 | 1.4 |
| 80 | 18 | 5,816 | 1.2 |
| 100 | 14 | 9,232 | 1.5 |
✅ Fitur Utama & Manfaat Unik
🔗 Poros Keluaran Ekor Arah Cacing — Pembeda Utama
The defining feature of the NRV-E110 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🚢 Heavy Chain + Crane Position Feedback
At 7.5 kW chain input with 12,000 N radial load capacity, the NRV-E110 is the standard choice for instrumented crane chain drives requiring both heavy chain power transmission and precise encoder position feedback.
◯ Same Torque as Standard NRV110
The NRV-E110 delivers identical maximum output torque (9,232 N·m) to the standard NRV110, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Encoder & Feedback Siap
Poros keluaran ekor menyediakan titik koneksi langsung untuk encoder putar, tachogenerator, dan generator pulsa yang memantau kecepatan poros cacing dalam sistem kontrol gerak loop tertutup, sehingga menghilangkan braket encoder eksternal dan perangkat keras kopling.
🚫 IP54 — Integritas Segel Ganda
Baik lubang keluaran utama maupun lubang keluar poros ekor disegel dengan segel bibir kontak ganda, mempertahankan perlindungan IP54 di semua orientasi pemasangan tanpa kebocoran oli pada antarmuka poros mana pun.
🏭 Skenario Aplikasi
🚢 Crane Travel Feedback
Large-frame NMRV-E110 worm gearbox for overhead crane long-travel drives where the tail shaft encoder provides position feedback to the crane control system, enabling precise load positioning.
⚙ Chemical Reactor Remote Monitoring
High-torque worm gear reducer with tail output shaft for large chemical reactor agitators where the tail shaft tachometer feeds into the plant DCS for real-time agitator speed verification.
🍲 Heavy Mining Instrumented Drives
Aluminium worm gearbox with tail shaft for underground mine face-conveyor drives where the tail-mounted rotation sensor provides safety interlock signals to the mine-wide emergency stop system.
💧 Municipal Water SCADA Integration
NMRV-E110 worm gearbox for large-diameter sludge thickener drives where the tail shaft speed signal integrates directly into the water authority SCADA system for remote performance monitoring.
🔎 Panduan Seleksi
Worked Example — Crane Chain Position Feedback
Required: NRV-E110 at i=60, chain-driven from 7.5 kW hydraulic motor, tail shaft to crane position encoder. Output speed = 23 r/min, torque = 5,399 N·m. Tail shaft: 1,000 PPR encoder, 42 mm bore. ✅ NRV-E110-60 selected.
⚖ NRV-E110 vs Standard NRV110
| Fitur | EP-NRV-E110 (with Tail Shaft) | EP-NRV110 (Standard) |
|---|---|---|
| Poros Keluaran Ekor | ✅ Ya — arah cacing | TIDAK |
| Pemasangan Encoder / Umpan Balik | Langsung pada poros ekor | Membutuhkan braket eksternal |
| Penggerak Beban Ganda | Ya — utama + ekor | Tidak — hanya keluaran tunggal |
| Torsi Keluaran Utama | 9,232 N·m | 9,232 N·m |
| Dimensi Perumahan | Sedikit lebih panjang (tonjolan batang ekor) | Panjang standar |
| Shaft Input | Yes — solid keyed shaft | Yes — solid keyed shaft |
NRV-E110 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Alur kunci |
|---|---|---|---|---|---|---|
| 155 | 162 | 249 | 324 | 12 | 42 | M16 |
❓ Pertanyaan yang Sering Diajukan
What is the tail output shaft on the EP-NRV-E110 and how is it different from the main output?
The tail shaft on the NRV-E110 exits the housing in the worm-direction axis (opposite end of the worm shaft), while the main output bore is perpendicular (90 degrees) to the worm axis. The tail shaft is driven off the worm shaft end and is used for encoder mounting, tachometer connection, or light auxiliary drive, while the main output delivers the full 9,232 N·m load torque.
Does the tail shaft reduce the main output torque of the NRV-E110?
No. The tail shaft draws only the small torque needed for its connected device. The main output retains the full 9,232 N·m rating, identical to the standard NRV110.
What is the input shaft specification for the NRV-E110?
The NRV-E110 has a solid keyed input shaft (no IEC flange). The shaft diameter matches the equivalent NMRV110 bore input diameter. It accepts chain sprockets, belt pulleys, and rigid couplings. A bilateral (double-ended) input shaft is standard; single-end configuration available on request.
What encoder types can be mounted on the NRV-E110 tail shaft?
Any standard keyed rotary encoder with the matching bore diameter can be mounted on the NRV-E110 tail shaft: incremental (5V–24V, 100–10,000 PPR), SSI absolute, or resolver-type. Confirm the encoder bore size and keyway before ordering. The tail shaft key dimensions match the catalogue DZ shaft specification for NMRV-E110.
Can the NRV-E110 be used for closed-loop speed control in a chain-driven system?
Yes. The NRV-E110 is the ideal solution for chain-driven systems requiring closed-loop speed feedback. The chain drives the solid input shaft; the main output drives the load; and the tail shaft mounts an encoder that feeds speed/position data back to the controller. This eliminates the need for a separate encoder mounting bracket or a second independent encoder drive arrangement.
⭐ Ulasan Pelanggan
★★★★★
“Our warehouse crane chain drives use NRV-E110 units with tail-shaft encoders providing position feedback to the crane management system. Load positioning accuracy improved to plus/minus 10 mm and crane cycle times reduced by 18% due to more confident positioning.”
Richard H. — Facilities Engineer, Warehouse 🇦🇺 Australia (VIC)
★★★★★
“We chain-drive NRV-E110 units on our port grain conveyor and use the tail-shaft speed signals for automatic throughput calculation. The terminal management system now tracks tonnes per hour in real time without manual sampling.”
James N. — Port Engineer, Grain Terminal 🇦🇺 Australia (SA)
★★★★☆
“The NRV-E110 drives our underground mine face-conveyor chain. The tail-shaft rotation sensor provides emergency-stop interlock signals and self-locking at ratio 40 ensures the conveyor cannot backdrive when the chain drive stops. Critical safety feature.”
Liam O. — Mining Maintenance Manager, Coal Mine 🇮🇿 New Zealand
⚙ Aksesoris & Produk yang Kompatibel
⚡ Motor IEC (B5/B14)
Motor AC standar dengan flensa IEC yang sesuai. Tersedia versi inverter VFD untuk kontrol kecepatan variabel.
🔗 Kit Poros Output
Padat tunggal (DZ), ujung ganda (SZ), flensa keluaran (F), flensa berongga (FL) — semuanya dengan toleransi H7/h6 dan alur pasak standar.
🔨 Lengan dan Braket Torsi
Lengan penahan torsi baja untuk konfigurasi pemasangan poros; pelat pemasangan kaki untuk orientasi B3/B6.
🔒 Kit Segel & Ventilasi
Kit pengganti seal bibir, sumbat ventilasi, dan sumbat pembuangan magnetik untuk interval servis yang lebih panjang.
Enquire About EP-NRV-E110
Our engineers will confirm the input shaft key, radial load, and encoder specification for your heavy chain-driven crane or port application.
Itu EP-NRV-E110 aluminium worm gearbox combines a solid shaft input (no IEC flange) with an additional worm-direction tail output shaft. Centre distance 110 mm, ratios 5 to 100, input power up to 7.5 kW, max output torque 9,232 N·m. The tail shaft enables simultaneous encoder feedback, safety interlock monitoring, or auxiliary drive — the ideal instrumented shaft-input worm gearbox for chain-driven closed-loop agricultural, industrial, and mining drive systems.
