説明
EP-NRV-E110 — Shaft-Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NRV-E110
| パラメータ | 価値 |
|---|---|
| シリーズ | NRV-E (Solid Shaft Input, No Flange, Worm-Direction Tail Output Shaft) |
| 中心距離 | 110 mm |
| 減速比 | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| 定格入力電力 | Up to 7.5 kW |
| 出力速度範囲 | 14～280回転/分（入力1400回転/分時） |
| 最大出力トルク | 9,232 N·m |
| 入力構成 | Solid shaft input (no IEC flange) + worm-direction tail output shaft |
| Input Shaft | Solid keyed shaft input |
| テール出力軸 | ウォーム方向（ウォームシャフトと同軸、反対側） |
| ハウジング材 | ダイキャストアルミニウム合金 |
| ウォームホイールの材質 | リン青銅 |
| ウォームシャフト材質 | 20CrMnTi合金鋼、表面硬化処理、精密研磨 |
| 出力穴径 | 42 mm H7 with keyway |
| 潤滑 | ISO VG 220ギアオイル（工場充填済み） |
| 取り付け位置 | B3、B6、B7、B8、V5、V6 |
| 保護等級 | IP54 |
| 周囲温度 | -10℃～+40℃ |
NRV-E110 Performance Table (7.5 kW / 1400 r/min)
| 比率（i） | 出力速度（回転/分） | 出力トルク（N・m） | サービス係数（fs） |
|---|---|---|---|
| 7.5 | 187 | 2,359 | 2.6 |
| 10 | 140 | 2,597 | 2.0 |
| 15 | 93 | 2,973 | 1.5 |
| 20 | 70 | 3,272 | 1.1 |
| 25 | 56 | 3,509 | 1.1 |
| 30 | 47 | 3,745 | 1.1 |
| 40 | 35 | 4,285 | 1.9 |
| 50 | 28 | 4,905 | 1.4 |
| 60 | 23 | 5,399 | 1.4 |
| 80 | 18 | 5,816 | 1.2 |
| 100 | 14 | 9,232 | 1.5 |
✅ 主な機能と独自のメリット
🔗 ウォーム方向テール出力軸 — 重要な差別化要因
The defining feature of the NRV-E110 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
🚢 Heavy Chain + Crane Position Feedback
At 7.5 kW chain input with 12,000 N radial load capacity, the NRV-E110 is the standard choice for instrumented crane chain drives requiring both heavy chain power transmission and precise encoder position feedback.
◯ Same Torque as Standard NRV110
The NRV-E110 delivers identical maximum output torque (9,232 N·m) to the standard NRV110, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 エンコーダーとフィードバックの準備完了
テール出力軸は、閉ループモーション制御システムにおいてウォームシャフトの速度を監視するロータリーエンコーダ、タコジェネレータ、パルスジェネレータを直接接続するための接続点を提供し、外部エンコーダブラケットやカップリングハードウェアを不要にします。
🚫 IP54 — 二重シールによる完全性
メイン出力穴とテールシャフト出口の両方に二重接触リップシールが採用されており、あらゆる取り付け方向において、どちらのシャフト接続部からも油漏れがなく、IP54の保護等級を維持します。
🏭 アプリケーションシナリオ
🚢 Crane Travel Feedback
Large-frame NMRV-E110 worm gearbox for overhead crane long-travel drives where the tail shaft encoder provides position feedback to the crane control system, enabling precise load positioning.
⚙ Chemical Reactor Remote Monitoring
High-torque worm gear reducer with tail output shaft for large chemical reactor agitators where the tail shaft tachometer feeds into the plant DCS for real-time agitator speed verification.
🍲 Heavy Mining Instrumented Drives
Aluminium worm gearbox with tail shaft for underground mine face-conveyor drives where the tail-mounted rotation sensor provides safety interlock signals to the mine-wide emergency stop system.
💧 Municipal Water SCADA Integration
NMRV-E110 worm gearbox for large-diameter sludge thickener drives where the tail shaft speed signal integrates directly into the water authority SCADA system for remote performance monitoring.
🔎 選択ガイド
Worked Example — Crane Chain Position Feedback
Required: NRV-E110 at i=60, chain-driven from 7.5 kW hydraulic motor, tail shaft to crane position encoder. Output speed = 23 r/min, torque = 5,399 N·m. Tail shaft: 1,000 PPR encoder, 42 mm bore. ✅ NRV-E110-60 selected.
⚖ NRV-E110 vs Standard NRV110
| 特徴 | EP-NRV-E110 (with Tail Shaft) | EP-NRV110 (Standard) |
|---|---|---|
| テール出力軸 | ✅ はい — ワーム方向 | いいえ |
| エンコーダー／フィードバックマウント | テールシャフトに直接 | 外部ブラケットが必要です |
| デュアルロードドライブ | はい — メイン + テール | いいえ — 出力は1つだけです |
| 主出力トルク | 9,232 N·m | 9,232 N·m |
| 住宅の寸法 | やや長め（尾部突出部） | 標準長さ |
| Shaft Input | Yes — solid keyed shaft | Yes — solid keyed shaft |
NRV-E110 Main Output Shaft Dimensions
| G1（mm） | K1（mm） | L/DZ (mm) | L1/SZ（mm） | b2（mm） | d h6 (mm) | キーウェイ |
|---|---|---|---|---|---|---|
| 155 | 162 | 249 | 324 | 12 | 42 | M16 |
❓よくある質問
What is the tail output shaft on the EP-NRV-E110 and how is it different from the main output?
The tail shaft on the NRV-E110 exits the housing in the worm-direction axis (opposite end of the worm shaft), while the main output bore is perpendicular (90 degrees) to the worm axis. The tail shaft is driven off the worm shaft end and is used for encoder mounting, tachometer connection, or light auxiliary drive, while the main output delivers the full 9,232 N·m load torque.
Does the tail shaft reduce the main output torque of the NRV-E110?
No. The tail shaft draws only the small torque needed for its connected device. The main output retains the full 9,232 N·m rating, identical to the standard NRV110.
What is the input shaft specification for the NRV-E110?
The NRV-E110 has a solid keyed input shaft (no IEC flange). The shaft diameter matches the equivalent NMRV110 bore input diameter. It accepts chain sprockets, belt pulleys, and rigid couplings. A bilateral (double-ended) input shaft is standard; single-end configuration available on request.
What encoder types can be mounted on the NRV-E110 tail shaft?
Any standard keyed rotary encoder with the matching bore diameter can be mounted on the NRV-E110 tail shaft: incremental (5V–24V, 100–10,000 PPR), SSI absolute, or resolver-type. Confirm the encoder bore size and keyway before ordering. The tail shaft key dimensions match the catalogue DZ shaft specification for NMRV-E110.
Can the NRV-E110 be used for closed-loop speed control in a chain-driven system?
Yes. The NRV-E110 is the ideal solution for chain-driven systems requiring closed-loop speed feedback. The chain drives the solid input shaft; the main output drives the load; and the tail shaft mounts an encoder that feeds speed/position data back to the controller. This eliminates the need for a separate encoder mounting bracket or a second independent encoder drive arrangement.
⭐ お客様の声
★★★★★
“Our warehouse crane chain drives use NRV-E110 units with tail-shaft encoders providing position feedback to the crane management system. Load positioning accuracy improved to plus/minus 10 mm and crane cycle times reduced by 18% due to more confident positioning.”
Richard H. — Facilities Engineer, Warehouse 🇦🇺 Australia (VIC)
★★★★★
“We chain-drive NRV-E110 units on our port grain conveyor and use the tail-shaft speed signals for automatic throughput calculation. The terminal management system now tracks tonnes per hour in real time without manual sampling.”
James N. — Port Engineer, Grain Terminal 🇦🇺 Australia (SA)
★★★★☆
“The NRV-E110 drives our underground mine face-conveyor chain. The tail-shaft rotation sensor provides emergency-stop interlock signals and self-locking at ratio 40 ensures the conveyor cannot backdrive when the chain drive stops. Critical safety feature.”
Liam O. — Mining Maintenance Manager, Coal Mine 🇮🇿 New Zealand
⚙ アクセサリー＆互換製品
⚡ IECモーター（B5/B14）
IECフランジ付きの標準ACモーター。可変速制御用のVFDインバーター対応バージョンもご用意しています。
🔗 出力軸キット
シングルソリッド（DZ）、ダブルエンド（SZ）、出力フランジ（F）、中空フランジ（FL）—すべてH7/h6公差で、標準キー溝付き。
🔨トルクアーム＆ブラケット
シャフト取り付け構成用のスチール製トルク反力アーム。B3/B6方向用の脚部取り付けプレート。
🔒シール＆ブリーザーキット
交換用リップシールキット、通気孔付きブリーザープラグ、および磁気ドレンプラグにより、メンテナンス間隔を延長できます。
Enquire About EP-NRV-E110
Our engineers will confirm the input shaft key, radial load, and encoder specification for your heavy chain-driven crane or port application.
の EP-NRV-E110 aluminium worm gearbox combines a solid shaft input (no IEC flange) with an additional worm-direction tail output shaft. Centre distance 110 mm, ratios 5 to 100, input power up to 7.5 kW, max output torque 9,232 N·m. The tail shaft enables simultaneous encoder feedback, safety interlock monitoring, or auxiliary drive — the ideal instrumented shaft-input worm gearbox for chain-driven closed-loop agricultural, industrial, and mining drive systems.
