Beschrijving
EP-NMRV-E040 — IEC Flange Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NMRV-E040
| Parameter | Waarde |
|---|---|
| Serie | NMRV-E (Bore Input with IEC Flange, Worm-Direction Tail Output Shaft) |
| Hartafstand | 040 mm |
| Reductieverhoudingen | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Nominaal ingangsvermogen | Tot 0,55 kW |
| Uitgangssnelheidsbereik | 14 tot 280 tpm (bij een ingangsvermogen van 1400 tpm) |
| Maximaal uitgangskoppel | 3.118 N·m |
| Invoerconfiguratie | Bore input with IEC input flange + worm-direction tail output shaft |
| IEC-ingangsflenzen | IEC flanges: 56B5, 63B14, 71B5, 71B14 |
| Uitgaande as | Wormrichting (coaxiaal met de wormas, tegenoverliggend uiteinde) |
| Behuizingsmateriaal | Gegoten aluminiumlegering |
| Wormwielmateriaal | Fosforbrons |
| Wormasmateriaal | 20CrMnTi gelegeerd staal, gehard en nauwkeurig geslepen |
| Diameter van de uitgaande boring | 18-22 mm H7 with keyway |
| Smering | ISO VG 220 tandwielolie (fabrieksvulling) |
| Montageposities | B3, B6, B7, B8, V5, V6 |
| Beschermingsklasse | IP54 |
| Omgevingstemperatuur | -10°C tot +40°C |
NMRV-E040 Performance Table (0.55 kW / 1400 r/min)
| Verhouding (i) | Uitgangssnelheid (r/min) | Uitgangskoppel (N·m) | Servicefactor (fs) |
|---|---|---|---|
| 7.5 | 187 | 1,315 | 2.5 |
| 10 | 140 | 1,447 | 1.9 |
| 15 | 93 | 1,657 | 1.3 |
| 20 | 70 | 1,824 | 1.0 |
| 25 | 56 | 1,964 | 0.8 |
| 30 | 47 | 2,087 | 0.9 |
| 40 | 35 | 2,298 | 1.6 |
| 50 | 28 | 2,475 | 1.3 |
| 60 | 23 | 2,630 | 1.3 |
| 80 | 18 | 2,895 | 1.0 |
| 100 | 14 | 3,118 | 1.0 |
✅ Kernfuncties en unieke voordelen
🔗 Wormrichtingsaandrijfas — Het belangrijkste onderscheidende kenmerk
The defining feature of the NMRV-E040 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
📈 3,118 N·m with IEC Flange + Encoder
The NMRV-E040 delivers 3,118 N·m maximum output torque with direct IEC motor flange mounting AND a tail shaft encoder output, providing the complete gearmotor-plus-encoder function in a single compact unit.
◯ Same Torque as Standard NMRV040
The NMRV-E040 delivers identical maximum output torque (3,118 N·m) to the standard NMRV040, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Encoder & Feedback Ready
De uitgaande as aan de achterzijde biedt een direct aansluitpunt voor roterende encoders, tachogeneratoren en pulsgeneratoren die de wormassnelheid bewaken in gesloten bewegingsbesturingssystemen, waardoor externe encoderbeugels en koppelingsonderdelen overbodig worden.
🚫 IP54 — Dubbele afdichting
Zowel de hoofduitlaatboring als de uitgang van de staartas zijn afgedicht met dubbele lipafdichtingen, waardoor IP54-bescherming behouden blijft bij alle montageposities zonder olielekkage bij beide asaansluitingen.
🏭 Toepassingsscenario's
⚙ Conveyor Speed Synchronisation
NMRV-E040 worm gearbox for multi-drive conveyor synchronisation systems. The tail shaft mounts a pulse encoder that feeds back to a master PLC, allowing all conveyor sections to maintain matched belt speeds.
🚮 Packaging & Labelling with Feedback
Industrial worm gear reducer with tail output shaft for packaging line label applicators and capping heads where encoder-verified torque delivery prevents label misregistration.
🌿 Agricultural Controlled Seeding
Corrosion-resistant NMRV-E worm gearbox for precision seeding machinery where tail-shaft encoder feedback to a GPS-linked controller varies seed rate in real time across paddock zones.
📥 Textile Tension Control
Worm gearmotor with tail shaft for textile winding machine let-off drives where real-time winding speed feedback via the tail shaft encoder maintains precise fabric tension throughout the roll.
🔎 Selectiegids
Worked Example — Conveyor Synchronisation
Required: NMRV-E040 at i=30 driving a packaging conveyor at 47 r/min with PLC speed feedback. Output torque from table = 2,087 N·m. Motor: 0.37 kW, IEC 71B14. Tail shaft: 500 PPR encoder, 18 mm bore. ✅ NMRV-E040-30-71B14 selected.
⚖ NMRV-E040 vs Standard NMRV040
| Functie | EP-NMRV-E040 (with Tail Shaft) | EP-NMRV040 (Standard) |
|---|---|---|
| Uitgaande as | ✅ Ja — wormrichting | Nee |
| Encoder-/feedbackmontage | Direct op de staartas | Vereist een externe beugel. |
| Dubbele belasting aandrijving | Ja — hoofd + staart | Nee — slechts één uitgang |
| Hoofduitgangskoppel | 3.118 N·m | 3.118 N·m |
| Afmetingen van de woning | Iets langer (uitsteeksel van de staartschacht) | Standaardlengte |
| IEC Flange Input | Yes — standard | Yes — standard |
NMRV-E040 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Sleutelgat |
|---|---|---|---|---|---|---|
| 78 | 82 | 128 | 164 | 6 | 18 | M6 |
❓ Veelgestelde vragen
What is the tail output shaft on the EP-NMRV-E040 and what is it used for?
The tail output shaft on the NMRV-E040 is a secondary shaft extending in the worm-direction axis (co-axial with the worm shaft, opposite end). It is used to mount rotary encoders, tachogenerators, or pulse generators for speed/position feedback, or to drive a small auxiliary load such as a lubrication pump, cooling fan, or pilot valve simultaneously with the main output drive.
Does the tail shaft affect the main output torque of the NMRV-E040?
No. The tail shaft is driven directly off the worm shaft end and carries only the small torque required for the encoder or auxiliary device. The main output bore delivers the full rated 3,118 N·m, identical to the standard NMRV040.
What encoder types are compatible with the NMRV-E040 tail output shaft?
The tail shaft is a standard keyed shaft accepting any incremental or absolute rotary encoder with the matching bore size. Common options include 5–24V incremental encoders (100–10,000 PPR), SSI absolute encoders, and resolver-type feedback devices. Confirm the encoder bore and key dimensions with the encoder supplier before ordering.
Which IEC motor flanges are available for the EP-NMRV-E040?
The NMRV-E040 accepts the following IEC input flanges: 56B5, 63B14, 71B5, 71B14. This covers the standard motor frame range for the 0.55 kW power class. Servo and stepper motor adaptor plates available on request.
Can the NMRV-E040 tail shaft be used to drive a secondary load simultaneously?
Yes, provided the secondary load torque on the tail shaft does not exceed the worm shaft’s additional torque capacity. For light-duty secondary loads such as small lubrication pumps (below 0.05 kW) or pilot valves, the tail shaft can be used simultaneously without affecting main output performance. Consult our engineering team for secondary loads above 0.05 kW.
⭐ Klantenrecensies
★★★★★
“The NMRV-E040 drives our multi-section conveyor synchronisation system. The tail shaft encoder provides the PLC with speed reference for all eight conveyor sections and registration errors have dropped to near zero since installation.”
Marcus L. — Automation Engineer, Packaging Plant 🇦🇺 Australia (Victoria)
★★★★★
“We use the NMRV-E040 on our textile winding tension control system. The tail-shaft tachogenerator gives us real-time winding speed data and our fabric defect rate has fallen by 22% since switching from open-loop drives.”
Elif T. — Production Manager, Textile Manufacturer 🇹🇷 Turkey
★★★★☆
“Fitted NMRV-E040 units on our labelling machine indexing drives. The tail shaft encoder confirmed our line speed to within 0.1% and eliminated occasional label skip errors that had plagued the previous open-loop arrangement.”
James O. — Line Engineer, Label Manufacturer 🇦🇺 Australia (QLD)
⚙ Accessoires en compatibele producten
⚡ IEC-motoren (B5/B14)
Standaard AC-motoren met bijpassende IEC-flens. Versies voor frequentieomvormers zijn beschikbaar voor variabele snelheidsregeling.
🔗 Uitgaande as-kits
Enkelvoudig massief (DZ), dubbelzijdig (SZ), uitgangsflens (F), holle flens (FL) — allemaal H7/H6 tolerantie met standaard spiebanen.
🔨 Torsiearmen en -beugels
Stalen torsiearmen voor asmontage; voetmontageplaten voor B3/B6-oriëntaties.
🔒 Afdichtings- en ontluchtingssets
Vervangende lipafdichtingssets, ontluchtingspluggen en magnetische aftappluggen voor langere onderhoudsintervallen.
Order the EP-NMRV-E040
Specify your IEC flange, ratio, and tail shaft encoder bore. Our team will confirm the complete assembly specification within one business day.
De EP-NMRV-E040 aluminium worm gearbox combines the bore-input IEC flange convenience of the NMRV040 with an additional worm-direction tail output shaft. Centre distance 040 mm, ratios 5 to 100, input power up to 0.55 kW, max output torque 3,118 N·m. The tail shaft enables simultaneous encoder feedback, tachometer monitoring, or auxiliary drive — the perfect instrumented worm gearbox for closed-loop automation, precision conveyor control, and SCADA-integrated industrial drives.
