Description
EP-NMRV-E150 — IEC Flange Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NMRV-E150
| Paramètre | Valeur |
|---|---|
| Série | NMRV-E (Bore Input with IEC Flange, Worm-Direction Tail Output Shaft) |
| Distance du centre | 150 mm |
| Taux de réduction | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Puissance d'entrée nominale | Up to 15 kW |
| Plage de vitesse de sortie | 14 à 280 tr/min (à une entrée de 1400 tr/min) |
| Couple de sortie maximal | 16,508 N·m |
| Configuration d'entrée | Bore input with IEC input flange + worm-direction tail output shaft |
| Brides d'entrée IEC | IEC flanges: 100/112B5, 100/112B14, 132B5, 160B5 |
| Arbre de sortie arrière | Sens de rotation de la vis sans fin (coaxial avec l'arbre de la vis sans fin, extrémité opposée) |
| Matériau du boîtier | Alliage d'aluminium moulé sous pression |
| Matériau de roue à vis sans fin | Bronze phosphoreux |
| Matériau de la tige de vis sans fin | Acier allié 20CrMnTi, cémenté, rectifié avec précision |
| Diamètre d'alésage de sortie | 50 mm H7 with keyway |
| Lubrification | Huile pour engrenages ISO VG 220 (remplissage d'usine) |
| Positions de montage | B3, B6, B7, B8, V5, V6 |
| Classe de protection | IP54 |
| Température ambiante | -10°C à +40°C |
NMRV-E150 Performance Table (15 kW / 1400 r/min)
| Rapport (i) | Vitesse de sortie (tr/min) | Couple de sortie (N·m) | Facteur de service (fs) |
|---|---|---|---|
| 7.5 | 187 | 6,962 | 1.7 |
| 10 | 140 | 7,663 | 1.3 |
| 15 | 93 | 8,771 | 0.9 |
| 20 | 70 | 9,654 | 1.0 |
| 25 | 56 | 10,400 | 0.8 |
| 30 | 47 | 11,051 | 1.3 |
| 40 | 35 | 12,163 | 1.3 |
| 50 | 28 | 13,103 | 1.0 |
| 60 | 23 | 13,924 | 0.8 |
| 80 | 18 | 15,325 | 1.0 |
| 100 | 14 | 16,508 | 0.8 |
✅ Fonctionnalités principales et avantages uniques
🔗 Arbre de sortie à vis sans fin — L'élément clé de différenciation
The defining feature of the NMRV-E150 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
★ Flagship 15 kW IEC + Maximum Tail Shaft
The NMRV-E150 is the only standard aluminium worm gearbox that combines 15 kW IEC 160B5 direct flange mounting with a 50 mm tail shaft encoder output, delivering the maximum performance in the NMRV-E series.
◯ Same Torque as Standard NMRV150
The NMRV-E150 delivers identical maximum output torque (16,508 N·m) to the standard NMRV150, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
Encodeur et retour d'information prêts
L'arbre de sortie arrière fournit un point de connexion directe pour les codeurs rotatifs, les tachymètres et les générateurs d'impulsions qui surveillent la vitesse de l'arbre à vis sans fin dans les systèmes de contrôle de mouvement en boucle fermée, éliminant ainsi les supports de codeur externes et les éléments de couplage.
🚫 IP54 — Intégrité à double joint
L'alésage de sortie principal et la sortie de l'arbre de queue sont tous deux étanches grâce à des joints à lèvres à double contact, maintenant une protection IP54 dans toutes les orientations de montage sans suintement d'huile au niveau de l'interface de l'arbre.
🏭 Scénarios d'application
🚢 Port Crane Hoist with Encoder
Flagship NMRV-E150 worm gearbox for heavy port crane hoist chain drives where the tail shaft mounts a high-resolution encoder providing precise hoist position feedback to the crane management system.
📥 Bulk Conveyor SCADA Monitoring
Maximum-torque worm gear reducer with tail output shaft for bulk material handling conveyor head-end drives where the tail shaft speed signal monitors tonnage throughput in real time.
⚙ Large Chemical Plant DCS Integration
Flagship aluminium worm gearbox with tail shaft for large polymer reactor agitator drives where the tail encoder feeds into the plant DCS providing real-time agitator speed verification.
💧 Primary Treatment Monitoring
NMRV-E150 worm gearbox for large-diameter primary clarifier rake drives where the tail shaft pulse counter provides the water authority operations centre with continuous rake-rotation confirmation.
🔎 Guide de sélection
Worked Example — Port Tonnage Tracking
Required: NMRV-E150 at i=60 driving port conveyor at 23 r/min with throughput monitoring encoder. Output torque from table = 13,924 N·m. Motor: 11 kW, IEC 160B5. Tail shaft: 500 PPR encoder, 50 mm bore. ✅ NMRV-E150-60-160B5 selected.
⚖ NMRV-E150 vs Standard NMRV150
| Fonctionnalité | EP-NMRV-E150 (with Tail Shaft) | EP-NMRV150 (Standard) |
|---|---|---|
| Arbre de sortie arrière | ✅ Oui — sens du ver | Non |
| Montage de l'encodeur/de la rétroaction | Directement sur l'arbre de queue | Nécessite un support externe |
| Entraînement à double charge | Oui — principal + queue | Non — sortie unique |
| Couple de sortie principal | 16,508 N·m | 16,508 N·m |
| Dimensions du logement | Légèrement plus long (protubérance de la tige de queue) | Longueur standard |
| IEC Flange Input | Yes — standard | Yes — standard |
NMRV-E150 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Keyway |
|---|---|---|---|---|---|---|
| 200 | 187 | 297 | 374 | 14 | 50 | M16 |
❓ Foire aux questions
What is the tail output shaft on the EP-NMRV-E150 and what is it used for?
The tail output shaft on the NMRV-E150 is a secondary shaft extending in the worm-direction axis (co-axial with the worm shaft, opposite end). It is used to mount rotary encoders, tachogenerators, or pulse generators for speed/position feedback, or to drive a small auxiliary load such as a lubrication pump, cooling fan, or pilot valve simultaneously with the main output drive.
Does the tail shaft affect the main output torque of the NMRV-E150?
No. The tail shaft is driven directly off the worm shaft end and carries only the small torque required for the encoder or auxiliary device. The main output bore delivers the full rated 16,508 N·m, identical to the standard NMRV150.
What encoder types are compatible with the NMRV-E150 tail output shaft?
The tail shaft is a standard keyed shaft accepting any incremental or absolute rotary encoder with the matching bore size. Common options include 5–24V incremental encoders (100–10,000 PPR), SSI absolute encoders, and resolver-type feedback devices. Confirm the encoder bore and key dimensions with the encoder supplier before ordering.
Which IEC motor flanges are available for the EP-NMRV-E150?
The NMRV-E150 accepts the following IEC input flanges: 100/112B5, 100/112B14, 132B5, 160B5. This covers the standard motor frame range for the 15 kW power class. Servo and stepper motor adaptor plates available on request.
Can the NMRV-E150 tail shaft be used to drive a secondary load simultaneously?
Yes, provided the secondary load torque on the tail shaft does not exceed the worm shaft’s additional torque capacity. For light-duty secondary loads such as small lubrication pumps (below 0.05 kW) or pilot valves, the tail shaft can be used simultaneously without affecting main output performance. Consult our engineering team for secondary loads above 0.05 kW.
⭐ Avis clients
★★★★★
“Our flagship NMRV-E150 drives the port grain conveyor head-end at ratio 100. The tail-shaft encoder feeds our terminal control system with belt speed data for automatic tonnage calculation. After 14 months of intensive operation, not a single maintenance issue.”
Tony V. — Terminal Engineer, Grain Export Port 🇦🇺 Australia (WA)
★★★★★
“We use four NMRV-E150 units on our heavy crane hoist drives. The tail-shaft high-resolution encoders provide 0.1 mm hoist position accuracy to our crane management system. The integrated encoder mount eliminated 32 hours of custom fabrication work.”
Anders L. — Mechanical Engineer, Offshore Platform 🇳🇴 Norway
★★★★☆
“The NMRV-E150 drives our large polymer reactor agitator. The tail-shaft encoder feeds our DCS with real-time agitator speed. We detected an early-stage bearing issue via speed variation trending and scheduled planned maintenance rather than facing an unplanned shutdown.”
Ibrahim A. — Plant Manager, Polymer Processing 🇪🇬 Egypt
⚙ Accessoires et produits compatibles
⚡ Moteurs IEC (B5/B14)
Moteurs à courant alternatif standard avec bride IEC correspondante. Versions pour variateur de fréquence disponibles pour la régulation de vitesse.
🔗 Kits d'arbre de sortie
simple plein (DZ), double extrémité (SZ), bride de sortie (F), bride creuse (FL) — tous à tolérance H7/h6 avec rainures de clavette standard.
🔨 Bras de couple et supports
Bras de réaction de couple en acier pour les configurations de montage sur arbre ; plaques de montage de pied pour les orientations B3/B6.
🔒 Kits de joints et de reniflard
Kits de joints à lèvres de rechange, bouchons de ventilation et bouchons de vidange magnétiques pour des intervalles d'entretien prolongés.
Enquire About EP-NMRV-E150
The NMRV-E150 is our flagship instrumented aluminium worm gearbox. Our engineers will confirm the 160B5 flange, ratio, and encoder specification for your maximum-power application.
Le EP-NMRV-E150 aluminium worm gearbox combines the bore-input IEC flange convenience of the NMRV150 with an additional worm-direction tail output shaft. Centre distance 150 mm, ratios 5 to 100, input power up to 15 kW, max output torque 16,508 N·m. The tail shaft enables simultaneous encoder feedback, tachometer monitoring, or auxiliary drive — the perfect instrumented worm gearbox for closed-loop automation, precision conveyor control, and SCADA-integrated industrial drives.
