Descrizione
EP-NMRV-E150 — IEC Flange Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NMRV-E150
| Parametro | Valore |
|---|---|
| Serie | NMRV-E (Bore Input with IEC Flange, Worm-Direction Tail Output Shaft) |
| Distanza dal centro | 150 mm |
| Rapporti di riduzione | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Potenza di ingresso valutata | Up to 15 kW |
| Gamma di velocità di uscita | Da 14 a 280 giri/min (con una velocità di ingresso di 1400 giri/min) |
| Coppia massima in uscita | 16,508 N·m |
| Configurazione di input | Bore input with IEC input flange + worm-direction tail output shaft |
| IEC Input Flanges | IEC flanges: 100/112B5, 100/112B14, 132B5, 160B5 |
| Albero di uscita posteriore | Direzione di avvolgimento della vite senza fine (coassiale con l'albero della vite senza fine, estremità opposta) |
| Materiale per alloggi | lega di alluminio pressofusa |
| Materiale della ruota a vite senza fine | bronzo fosforoso |
| Materiale dell'albero a vite senza fine | Acciaio legato 20CrMnTi, cementato, rettificato di precisione |
| Diametro del foro di uscita | 50 mm H7 with keyway |
| Lubrificazione | Olio per ingranaggi ISO VG 220 (riempito in fabbrica) |
| Posizioni di montaggio | B3, B6, B7, B8, V5, V6 |
| Classe di protezione | IP54 |
| Temperatura ambiente | da -10 °C a +40 °C |
NMRV-E150 Performance Table (15 kW / 1400 r/min)
| Rapporto (i) | Velocità di uscita (giri/min) | Coppia in uscita (N·m) | Fattore di servizio (fs) |
|---|---|---|---|
| 7.5 | 187 | 6,962 | 1.7 |
| 10 | 140 | 7,663 | 1.3 |
| 15 | 93 | 8,771 | 0.9 |
| 20 | 70 | 9,654 | 1.0 |
| 25 | 56 | 10,400 | 0.8 |
| 30 | 47 | 11,051 | 1.3 |
| 40 | 35 | 12,163 | 1.3 |
| 50 | 28 | 13,103 | 1.0 |
| 60 | 23 | 13,924 | 0.8 |
| 80 | 18 | 15,325 | 1.0 |
| 100 | 14 | 16,508 | 0.8 |
✅ Caratteristiche principali e vantaggi esclusivi
🔗 Albero di uscita posteriore a vite senza fine: l'elemento distintivo fondamentale
The defining feature of the NMRV-E150 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
★ Flagship 15 kW IEC + Maximum Tail Shaft
The NMRV-E150 is the only standard aluminium worm gearbox that combines 15 kW IEC 160B5 direct flange mounting with a 50 mm tail shaft encoder output, delivering the maximum performance in the NMRV-E series.
◯ Same Torque as Standard NMRV150
The NMRV-E150 delivers identical maximum output torque (16,508 N·m) to the standard NMRV150, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Codificatore e feedback pronti
L'albero di uscita posteriore fornisce un punto di connessione diretto per encoder rotativi, tachigeneratori e generatori di impulsi che monitorano la velocità dell'albero a vite senza fine nei sistemi di controllo del movimento a circuito chiuso, eliminando staffe per encoder esterne e componenti di accoppiamento.
🚫 IP54 — Integrità a doppia guarnizione
Sia l'alesaggio di uscita principale che l'uscita dell'albero di coda sono sigillati con guarnizioni a labbro a doppio contatto, mantenendo la protezione IP54 in tutte le configurazioni di montaggio senza perdite d'olio in corrispondenza delle interfacce dell'albero.
🏭 Scenari applicativi
🚢 Port Crane Hoist with Encoder
Flagship NMRV-E150 worm gearbox for heavy port crane hoist chain drives where the tail shaft mounts a high-resolution encoder providing precise hoist position feedback to the crane management system.
📥 Bulk Conveyor SCADA Monitoring
Maximum-torque worm gear reducer with tail output shaft for bulk material handling conveyor head-end drives where the tail shaft speed signal monitors tonnage throughput in real time.
⚙ Large Chemical Plant DCS Integration
Flagship aluminium worm gearbox with tail shaft for large polymer reactor agitator drives where the tail encoder feeds into the plant DCS providing real-time agitator speed verification.
💧 Primary Treatment Monitoring
NMRV-E150 worm gearbox for large-diameter primary clarifier rake drives where the tail shaft pulse counter provides the water authority operations centre with continuous rake-rotation confirmation.
🔎 Guida alla selezione
Worked Example — Port Tonnage Tracking
Required: NMRV-E150 at i=60 driving port conveyor at 23 r/min with throughput monitoring encoder. Output torque from table = 13,924 N·m. Motor: 11 kW, IEC 160B5. Tail shaft: 500 PPR encoder, 50 mm bore. ✅ NMRV-E150-60-160B5 selected.
⚖ NMRV-E150 vs Standard NMRV150
| Caratteristica | EP-NMRV-E150 (with Tail Shaft) | EP-NMRV150 (Standard) |
|---|---|---|
| Albero di uscita posteriore | ✅ Sì — direzione del verme | NO |
| Montaggio encoder/feedback | Direttamente sull'albero di coda | Richiede una staffa esterna |
| Azionamento a doppio carico | Sì — principale + coda | No, solo uscita singola |
| Coppia di uscita principale | 16,508 N·m | 16,508 N·m |
| Dimensioni dell'abitazione | Leggermente più lungo (sporgenza dell'albero di coda) | Lunghezza standard |
| IEC Flange Input | Yes — standard | Yes — standard |
NMRV-E150 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Keyway |
|---|---|---|---|---|---|---|
| 200 | 187 | 297 | 374 | 14 | 50 | M16 |
❓ Domande frequenti
What is the tail output shaft on the EP-NMRV-E150 and what is it used for?
The tail output shaft on the NMRV-E150 is a secondary shaft extending in the worm-direction axis (co-axial with the worm shaft, opposite end). It is used to mount rotary encoders, tachogenerators, or pulse generators for speed/position feedback, or to drive a small auxiliary load such as a lubrication pump, cooling fan, or pilot valve simultaneously with the main output drive.
Does the tail shaft affect the main output torque of the NMRV-E150?
No. The tail shaft is driven directly off the worm shaft end and carries only the small torque required for the encoder or auxiliary device. The main output bore delivers the full rated 16,508 N·m, identical to the standard NMRV150.
What encoder types are compatible with the NMRV-E150 tail output shaft?
The tail shaft is a standard keyed shaft accepting any incremental or absolute rotary encoder with the matching bore size. Common options include 5–24V incremental encoders (100–10,000 PPR), SSI absolute encoders, and resolver-type feedback devices. Confirm the encoder bore and key dimensions with the encoder supplier before ordering.
Which IEC motor flanges are available for the EP-NMRV-E150?
The NMRV-E150 accepts the following IEC input flanges: 100/112B5, 100/112B14, 132B5, 160B5. This covers the standard motor frame range for the 15 kW power class. Servo and stepper motor adaptor plates available on request.
Can the NMRV-E150 tail shaft be used to drive a secondary load simultaneously?
Yes, provided the secondary load torque on the tail shaft does not exceed the worm shaft’s additional torque capacity. For light-duty secondary loads such as small lubrication pumps (below 0.05 kW) or pilot valves, the tail shaft can be used simultaneously without affecting main output performance. Consult our engineering team for secondary loads above 0.05 kW.
⭐ Recensioni dei clienti
★★★★★
“Our flagship NMRV-E150 drives the port grain conveyor head-end at ratio 100. The tail-shaft encoder feeds our terminal control system with belt speed data for automatic tonnage calculation. After 14 months of intensive operation, not a single maintenance issue.”
Tony V. — Terminal Engineer, Grain Export Port 🇦🇺 Australia (WA)
★★★★★
“We use four NMRV-E150 units on our heavy crane hoist drives. The tail-shaft high-resolution encoders provide 0.1 mm hoist position accuracy to our crane management system. The integrated encoder mount eliminated 32 hours of custom fabrication work.”
Anders L. — Mechanical Engineer, Offshore Platform 🇳🇴 Norway
★★★★☆
“The NMRV-E150 drives our large polymer reactor agitator. The tail-shaft encoder feeds our DCS with real-time agitator speed. We detected an early-stage bearing issue via speed variation trending and scheduled planned maintenance rather than facing an unplanned shutdown.”
Ibrahim A. — Plant Manager, Polymer Processing 🇪🇬 Egypt
⚙ Accessori e prodotti compatibili
⚡ Motori IEC (B5/B14)
Motori CA standard con flangia IEC compatibile. Sono disponibili versioni per inverter VFD per il controllo della velocità variabile.
🔗 Kit albero di uscita
Monoblocco pieno (DZ), a doppia estremità (SZ), flangia di uscita (F), flangia cava (FL) — tutte con tolleranza H7/h6 e scanalature per chiavetta standard.
🔨 Bracci e staffe di torsione
Bracci di reazione di coppia in acciaio per configurazioni con montaggio su albero; piastre di fissaggio per orientamenti B3/B6.
🔒 Kit di guarnizioni e sfiati
Kit di guarnizioni di ricambio, tappi di sfiato e tappi di scarico magnetici per intervalli di manutenzione prolungati.
Enquire About EP-NMRV-E150
The NMRV-E150 is our flagship instrumented aluminium worm gearbox. Our engineers will confirm the 160B5 flange, ratio, and encoder specification for your maximum-power application.
IL EP-NMRV-E150 aluminium worm gearbox combines the bore-input IEC flange convenience of the NMRV150 with an additional worm-direction tail output shaft. Centre distance 150 mm, ratios 5 to 100, input power up to 15 kW, max output torque 16,508 N·m. The tail shaft enables simultaneous encoder feedback, tachometer monitoring, or auxiliary drive — the perfect instrumented worm gearbox for closed-loop automation, precision conveyor control, and SCADA-integrated industrial drives.
