Worm Gear Reducer for Mining Crushers

Worm Gear Reducer for Mining Crushers

Mining crushers — jaw crushers, cone crushers, and roll crushers — represent some of the most mechanically demanding environments in heavy industry. They impose extreme impact loads, high starting torques, and continuous vibration on every drive component. The червячный редуктор deployed in crusher auxiliary and feeder drives delivers high reduction ratios in a compact envelope, ensuring full drive torque from a standard motor frame even in the space-constrained confines of a mine shaft or processing plant.

While the primary crusher drive may use a direct-drive or fluid coupling arrangement, worm gearboxes serve critical roles in the crusher circuit: driving the vibrating grizzly feeder that regulates ore feed rate, actuating the CSS adjustment mechanism, driving the lubrication oil pump motor on large gyratory crushers, and controlling the apron feeder beneath the jaw crusher discharge.

In all these roles, the worm reducer’s defining advantage is torque multiplication at compact size — reduction ratios up to 100:1 from a single stage allow a small motor to overcome the starting inertia and shock loads characteristic of crusher circuits.

Применение в промышленности и примеры использования

In a typical crusher plant layout, worm gearboxes appear at multiple points in the circuit:

• Vibrating grizzly feeder drives — eccentric mass adjustment and feed rate control
• CSS adjustment actuators on cone crushers — precise low-speed setting changes under hydraulic load
• Apron feeder drives beneath jaw crushers — high starting torque against loaded apron pans
• Roll crusher drives (secondary stage) — low-speed high-torque direct drive of crushing rolls
• Lubrication pump drives on large gyratory crushers — slow continuous pump rotation

Material specifications for crusher duty: Worm shaft in carburised-and-quenched alloy steel (HRC 60–62). Worm wheel in special alloy bronze with higher tin content for improved impact resistance. Housing in ductile iron GGG40 with IP65 sealing as minimum — IP66 recommended near crusher discharge zones where water-and-fines slurry splashing is common.

Shock load and service factor: Crusher circuits are classified as heavy-shock applications with service factor SF=1.75–2.0. This means the gearbox must be selected with a rated output torque at least 1.75× the calculated application torque. Undersizing a worm gearbox in a crusher circuit leads to premature bronze wheel wear and thermal overload.

Технические характеристики и руководство по выбору

Используйте таблицу ниже, чтобы определить подходящую модель. Ключевые параметры включают передаточное число, выходной крутящий момент, размеры вала и материал корпуса. Всегда применяйте правильные параметры. Коэффициент обслуживания (SF) для вашего рабочего цикла.

► Коэффициент обслуживания (SF): Uniform load SF=1.0  |  Moderate shock SF=1.25–1.5  |  Heavy shock / 24 h continuous SF=1.75–2.0

► Температура окружающей среды: Standard units rated –10°C to +40°C. Australian high-ambient sites (>45°C) require high-temperature lubricant and 15% thermal derating.

Червячный редуктор серии NMRV/NRV

Available in frame sizes 025 through 150. Single-stage reduction ratios 5:1 to 100:1. Output torque up to 4,200 N·m. Aluminium or ductile iron housing. IEC B5/B14 motor flange. IP65 standard, IP66/IP67 optional. Synthetic or mineral oil lubrication.

Соответствие стандартам и стандартам качества

Примеры из практики

NMRV / NRV series worm gearboxes — frame sizes 025 to 150, manufactured to ISO 9001:2015

Почему выбирают нас?

Часто задаваемые вопросы