Description
EP-NMRV-E130 — IEC Flange Input Aluminium Worm Gearbox with Tail Output Shaft
Technical Specifications — EP-NMRV-E130
| Parameter | Value |
|---|---|
| Series | NMRV-E (Bore Input with IEC Flange, Worm-Direction Tail Output Shaft) |
| Centre Distance | 130 mm |
| Reduction Ratios | 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 80, 100 |
| Rated Input Power | Up to 11 kW |
| Output Speed Range | 14 to 280 r/min (at 1400 r/min input) |
| Max Output Torque | 12,076 N·m |
| Input Configuration | Bore input with IEC input flange + worm-direction tail output shaft |
| IEC Input Flanges | IEC flanges: 90B5, 90B14, 100/112B5, 100/112B14, 132B5 |
| Tail Output Shaft | Worm-direction (co-axial with worm shaft, opposite end) |
| Housing Material | Die-cast aluminium alloy |
| Worm Wheel Material | Phosphor bronze |
| Worm Shaft Material | 20CrMnTi alloy steel, case hardened, precision ground |
| Output Bore Diameter | 45 mm H7 with keyway |
| Lubrication | ISO VG 220 gear oil (factory filled) |
| Mounting Positions | B3, B6, B7, B8, V5, V6 |
| Protection Class | IP54 |
| Ambient Temperature | -10°C to +40°C |
NMRV-E130 Performance Table (11 kW / 1400 r/min)
| Ratio (i) | Output Speed (r/min) | Output Torque (N·m) | Service Factor (fs) |
|---|---|---|---|
| 7.5 | 187 | 3,893 | 1.9 |
| 10 | 140 | 4,285 | 1.8 |
| 15 | 93 | 4,905 | 1.4 |
| 20 | 70 | 5,399 | 1.1 |
| 25 | 56 | 5,816 | 1.1 |
| 30 | 47 | 6,181 | 1.1 |
| 40 | 35 | 7,607 | 1.2 |
| 50 | 28 | 8,084 | 1.2 |
| 60 | 23 | 8,897 | 1.0 |
| 80 | 18 | 10,185 | 1.0 |
| 100 | 14 | 12,076 | 1.1 |
✅ Core Features & Unique Benefits
🔗 Worm-Direction Tail Output Shaft — The Key Differentiator
The defining feature of the NMRV-E130 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.
📥 11 kW IEC + Extra-Large Tail Shaft
The NMRV-E130 delivers 12,076 N·m with direct IEC 132B5 motor flange mounting plus a 45 mm tail shaft for high-resolution encoder feedback, covering the most demanding instrumented heavy-industrial drive requirements.
◯ Same Torque as Standard NMRV130
The NMRV-E130 delivers identical maximum output torque (12,076 N·m) to the standard NMRV130, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.
🅆 Encoder & Feedback Ready
The tail output shaft provides a direct connection point for rotary encoders, tachogenerators, and pulse generators that monitor worm shaft speed in closed-loop motion control systems, eliminating external encoder brackets and coupling hardware.
🚫 IP54 — Dual-Seal Integrity
Both the main output bore and the tail shaft exit are sealed with dual-contact lip seals, maintaining IP54 protection across all mounting orientations without oil weeping at either shaft interface.
🏭 Application Scenarios
🚢 Heavy Crane Hoist Monitoring
Extra-large NMRV-E130 worm gearbox for gantry crane hoist drum drives where the tail shaft provides real-time hoist speed feedback to the crane overload protection system.
📥 Port Bulk Handling SCADA
High-power worm gear reducer with tail output shaft for port grain conveyor drives where the tail shaft speed signal confirms throughput rate to the terminal management system.
🍲 Large Mining Instrumented Drive
Aluminium worm gearbox with tail shaft for large surface mining conveyor drives where the tail-mounted encoder feeds belt speed data to the mine belt management and splice monitoring system.
⚙ Large Reactor Process Control
NMRV-E130 worm gearbox for large chemical reactor agitator drives where the tail shaft encoder provides process speed feedback to the reactor control system for viscosity-controlled mixing.
🔎 Selection Guide
Worked Example — Clarifier Remote Monitoring
Required: NMRV-E130 at i=80 driving a primary clarifier rake at 18 r/min with SCADA pulse counter. Output torque from table = 10,185 N·m. Motor: 7.5 kW, IEC 132B5. Tail shaft: 60 PPR pulse wheel, 45 mm bore. ✅ NMRV-E130-80-132B5 selected.
⚖ NMRV-E130 vs Standard NMRV130
| Feature | EP-NMRV-E130 (with Tail Shaft) | EP-NMRV130 (Standard) |
|---|---|---|
| Tail Output Shaft | ✅ Yes — worm-direction | No |
| Encoder / Feedback Mounting | Direct on tail shaft | Requires external bracket |
| Dual-Load Drive | Yes — main + tail | No — single output only |
| Main Output Torque | 12,076 N·m | 12,076 N·m |
| Housing Dimensions | Slightly longer (tail shaft protrusion) | Standard length |
| IEC Flange Input | Yes — standard | Yes — standard |
NMRV-E130 Main Output Shaft Dimensions
| G1 (mm) | K1 (mm) | L/DZ (mm) | L1/SZ (mm) | b2 (mm) | d h6 (mm) | Keyway |
|---|---|---|---|---|---|---|
| 170 | 170 | 265 | 340 | 14 | 45 | M16 |
❓ Frequently Asked Questions
What is the tail output shaft on the EP-NMRV-E130 and what is it used for?
The tail output shaft on the NMRV-E130 is a secondary shaft extending in the worm-direction axis (co-axial with the worm shaft, opposite end). It is used to mount rotary encoders, tachogenerators, or pulse generators for speed/position feedback, or to drive a small auxiliary load such as a lubrication pump, cooling fan, or pilot valve simultaneously with the main output drive.
Does the tail shaft affect the main output torque of the NMRV-E130?
No. The tail shaft is driven directly off the worm shaft end and carries only the small torque required for the encoder or auxiliary device. The main output bore delivers the full rated 12,076 N·m, identical to the standard NMRV130.
What encoder types are compatible with the NMRV-E130 tail output shaft?
The tail shaft is a standard keyed shaft accepting any incremental or absolute rotary encoder with the matching bore size. Common options include 5–24V incremental encoders (100–10,000 PPR), SSI absolute encoders, and resolver-type feedback devices. Confirm the encoder bore and key dimensions with the encoder supplier before ordering.
Which IEC motor flanges are available for the EP-NMRV-E130?
The NMRV-E130 accepts the following IEC input flanges: 90B5, 90B14, 100/112B5, 100/112B14, 132B5. This covers the standard motor frame range for the 11 kW power class. Servo and stepper motor adaptor plates available on request.
Can the NMRV-E130 tail shaft be used to drive a secondary load simultaneously?
Yes, provided the secondary load torque on the tail shaft does not exceed the worm shaft’s additional torque capacity. For light-duty secondary loads such as small lubrication pumps (below 0.05 kW) or pilot valves, the tail shaft can be used simultaneously without affecting main output performance. Consult our engineering team for secondary loads above 0.05 kW.
⭐ Customer Reviews
★★★★★
“We use the NMRV-E130 on our gantry crane hoist drum drive. The tail-shaft encoder provides load position feedback to our crane control PLC with 5 mm positioning resolution. The integrated encoder mount saved us two weeks of custom bracket fabrication time.”
Craig S. — Crane Engineer, Heavy Industry 🇦🇺 Australia (SA)
★★★★★
“Our large primary clarifier rake uses an NMRV-E130 with a tail-shaft pulse counter integrated into our water authority SCADA. We now monitor rake rotation remotely across all eight clarifiers from a single control room screen.”
Niamh F. — Asset Manager, City Water Services 🇮🇪 Ireland
★★★★☆
“The NMRV-E130 drives our port stacker-reclaimer slewing mechanism. The tail-shaft encoder feeds our terminal management system with real-time slewing position data. Installation was straightforward and position accuracy is excellent.”
Marco P. — Terminal Engineer, Bulk Port 🇳🇿 New Zealand
⚙ Accessories & Compatible Products
⚡ IEC Motors (B5/B14)
Standard AC motors with matching IEC flange. VFD inverter-duty versions available for variable-speed control.
🔗 Output Shaft Kits
Single solid (DZ), double-ended (SZ), output flange (F), hollow flange (FL) — all H7/h6 tolerance with standard keyways.
🔨 Torque Arms & Brackets
Steel torque reaction arms for shaft-mount configurations; foot-mounting plates for B3/B6 orientations.
🔒 Seal & Breather Kits
Replacement lip-seal kits, vented breather plugs, and magnetic drain plugs for extended service intervals.
Specify the EP-NMRV-E130
Our team will confirm the IEC flange, ratio, and encoder shaft specification for your extra-large industrial instrumented drive application.
The EP-NMRV-E130 aluminium worm gearbox combines the bore-input IEC flange convenience of the NMRV130 with an additional worm-direction tail output shaft. Centre distance 130 mm, ratios 5 to 100, input power up to 11 kW, max output torque 12,076 N·m. The tail shaft enables simultaneous encoder feedback, tachometer monitoring, or auxiliary drive — the perfect instrumented worm gearbox for closed-loop automation, precision conveyor control, and SCADA-integrated industrial drives.
