EP-NMRV-E130 Aluminium Worm Gearbox

🔗蜗杆导向尾部输出轴——关键区别因素

The defining feature of the NMRV-E130 is its additional tail output shaft that extends in the same direction as the worm shaft axis. This second output enables simultaneous drive of two independent loads from a single gearbox — a primary application drive via the main output bore and a secondary auxiliary drive (encoder, tachometer, small pump, or fan) via the tail shaft.

📥 11 kW IEC + Extra-Large Tail Shaft

The NMRV-E130 delivers 12,076 N·m with direct IEC 132B5 motor flange mounting plus a 45 mm tail shaft for high-resolution encoder feedback, covering the most demanding instrumented heavy-industrial drive requirements.

◯ Same Torque as Standard NMRV130

The NMRV-E130 delivers identical maximum output torque (12,076 N·m) to the standard NMRV130, confirming that the tail shaft adds zero performance penalty on the main output. The tail shaft is driven directly off the worm shaft end, not the output stage.

编码器和反馈就绪

尾部输出轴为旋转编码器、测速发电机和脉冲发生器提供了直接连接点，这些设备用于在闭环运动控制系统中监测蜗杆轴的速度，从而无需外部编码器支架和联轴器硬件。

🚫 IP54 — 双重密封完整性

主输出孔和尾轴出口均采用双接触唇形密封件密封，在所有安装方向上均保持 IP54 防护等级，且在任何轴接口处均无漏油现象。

🚢 Heavy Crane Hoist Monitoring

Extra-large NMRV-E130 worm gearbox for gantry crane hoist drum drives where the tail shaft provides real-time hoist speed feedback to the crane overload protection system.

📥 Port Bulk Handling SCADA

High-power worm gear reducer with tail output shaft for port grain conveyor drives where the tail shaft speed signal confirms throughput rate to the terminal management system.

🍲 Large Mining Instrumented Drive

Aluminium worm gearbox with tail shaft for large surface mining conveyor drives where the tail-mounted encoder feeds belt speed data to the mine belt management and splice monitoring system.

⚙ Large Reactor Process Control

NMRV-E130 worm gearbox for large chemical reactor agitator drives where the tail shaft encoder provides process speed feedback to the reactor control system for viscosity-controlled mixing.

★★★★★

“We use the NMRV-E130 on our gantry crane hoist drum drive. The tail-shaft encoder provides load position feedback to our crane control PLC with 5 mm positioning resolution. The integrated encoder mount saved us two weeks of custom bracket fabrication time.”

Craig S. — Crane Engineer, Heavy Industry 🇦🇺 Australia (SA)

★★★★★

“Our large primary clarifier rake uses an NMRV-E130 with a tail-shaft pulse counter integrated into our water authority SCADA. We now monitor rake rotation remotely across all eight clarifiers from a single control room screen.”

Niamh F. — Asset Manager, City Water Services 🇮🇪 Ireland

★★★★☆

“The NMRV-E130 drives our port stacker-reclaimer slewing mechanism. The tail-shaft encoder feeds our terminal management system with real-time slewing position data. Installation was straightforward and position accuracy is excellent.”

Marco P. — Terminal Engineer, Bulk Port 🇳🇿 New Zealand

⚡ IEC电机（B5/B14）

标准交流电机，配有匹配的IEC法兰。另有VFD变频器版本，可实现变速控制。

🔗 输出轴套件

单端实心（DZ）、双端（SZ）、输出法兰（F）、空心法兰（FL）——所有 H7/h6 公差，带标准键槽。

🔨扭力臂和支架

用于轴安装配置的钢制扭矩反作用臂；用于 B3/B6 方向的底座安装板。

🔒密封和呼吸套件

更换唇形密封件套件、通气塞和磁性放油塞，延长保养周期。